[PATCH v5 2/6] clocksource: timer-npcm7xx: Enable timer 1 clock before use

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



In the WPCM450 SoC, the clocks for each timer can be gated individually.
To prevent the timer 1 clock from being gated, enable it explicitly.

Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@xxxxxxx>
---

Daniel Lezcano mentioned that he applied this patch, but I wasn't able
to find it in linux-next, so I'm sending it again.

v5:
- no changes relative to v3

v4:
- not included

v3:
- no changes

v2:
- Provide context in pr_warn message

v1:
- https://lore.kernel.org/lkml/20220422183012.444674-3-j.neuschaefer@xxxxxxx/
---
 drivers/clocksource/timer-npcm7xx.c | 10 ++++++++++
 1 file changed, 10 insertions(+)

diff --git a/drivers/clocksource/timer-npcm7xx.c b/drivers/clocksource/timer-npcm7xx.c
index a00520cbb660a..9af30af5f989a 100644
--- a/drivers/clocksource/timer-npcm7xx.c
+++ b/drivers/clocksource/timer-npcm7xx.c
@@ -188,6 +188,7 @@ static void __init npcm7xx_clocksource_init(void)

 static int __init npcm7xx_timer_init(struct device_node *np)
 {
+	struct clk *clk;
 	int ret;

 	ret = timer_of_init(np, &npcm7xx_to);
@@ -199,6 +200,15 @@ static int __init npcm7xx_timer_init(struct device_node *np)
 	npcm7xx_to.of_clk.rate = npcm7xx_to.of_clk.rate /
 		(NPCM7XX_Tx_MIN_PRESCALE + 1);

+	/* Enable the clock for timer1, if it exists */
+	clk = of_clk_get(np, 1);
+	if (clk) {
+		if (!IS_ERR(clk))
+			clk_prepare_enable(clk);
+		else
+			pr_warn("%pOF: Failed to get clock for timer1: %pe", np, clk);
+	}
+
 	npcm7xx_clocksource_init();
 	npcm7xx_clockevents_init();

--
2.35.1





[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux