On 04/11/2022 02:19, Sheng-Liang Pan wrote:
> add specific 3mic setting as sc7280-herobrine-audio-rt5682-3mic.dtsi,
> so we can include sc7280-herobrine-audio-rt5682-3mic.dtsi for evoker
> as it uses rt5682 with 3 mics.
>
> Signed-off-by: Sheng-Liang Pan <sheng-liang.pan@xxxxxxxxxxxxxxxxxxxxxxxxxxxxxx>
> ---
>
> Changes in v10:
> - add evoker include specific sc7280-herobrine-audio-rt5682-3mic.dtsi setting
>
> .../sc7280-herobrine-audio-rt5682-3mic.dtsi | 194 ++++++++++++++++++
> .../boot/dts/qcom/sc7280-herobrine-evoker.dts | 2 +
> 2 files changed, 196 insertions(+)
> create mode 100644 arch/arm64/boot/dts/qcom/sc7280-herobrine-audio-rt5682-3mic.dtsi
>
> diff --git a/arch/arm64/boot/dts/qcom/sc7280-herobrine-audio-rt5682-3mic.dtsi b/arch/arm64/boot/dts/qcom/sc7280-herobrine-audio-rt5682-3mic.dtsi
> new file mode 100644
> index 0000000000000..01bc8ee93b19a
> --- /dev/null
> +++ b/arch/arm64/boot/dts/qcom/sc7280-herobrine-audio-rt5682-3mic.dtsi
> @@ -0,0 +1,194 @@
> +// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
> +/*
> + *
> + * This file defines the common audio settings for the child boards
> + * using rt5682 codec and having 3 dmics connected to sc7280.
> + *
> + * Copyright 2022 Google LLC.
> + */
> +
> +/ {
> + /* BOARD-SPECIFIC TOP LEVEL NODES */
> + sound: sound {
> + compatible = "google,sc7280-herobrine";
> + model = "sc7280-rt5682-max98360a-3mic";
> +
> + status = "okay";
No need.
> + audio-routing =
No need for line break.
> + "VA DMIC0", "vdd-micb",
> + "VA DMIC1", "vdd-micb",
> + "VA DMIC2", "vdd-micb",
> + "VA DMIC3", "vdd-micb",
> +
> + "Headphone Jack", "HPOL",
> + "Headphone Jack", "HPOR";
> +
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + dai-link@0 {
> + link-name = "MAX98360";
> + reg = <0>;
> +
> + cpu {
> + sound-dai = <&lpass_cpu MI2S_SECONDARY>;
> + };
> +
> + codec {
> + sound-dai = <&max98360a>;
> + };
> + };
> +
> + dai-link@1 {
> + link-name = "DisplayPort";
> + reg = <1>;
> +
> + cpu {
> + sound-dai = <&lpass_cpu LPASS_DP_RX>;
> + };
> +
> + codec {
> + sound-dai = <&mdss_dp>;
> + };
> + };
> +
> + dai-link@2 {
> + link-name = "ALC5682";
> + reg = <2>;
> +
> + cpu {
> + sound-dai = <&lpass_cpu MI2S_PRIMARY>;
> + };
> +
> + codec {
> + sound-dai = <&alc5682 0 /* aif1 */>;
> + };
> + };
> +
> + dai-link@4 {
> + link-name = "DMIC";
> + reg = <4>;
> +
> + cpu {
> + sound-dai = <&lpass_cpu LPASS_CDC_DMA_VA_TX0>;
> + };
> +
> + codec {
> + sound-dai = <&lpass_va_macro 0>;
> + };
> + };
> + };
> +};
> +
> +hp_i2c: &i2c2 {
> + status = "okay";
Status is the last property.
> + clock-frequency = <400000>;
> +
> + alc5682: codec@1a {
> + compatible = "realtek,rt5682s";
> + reg = <0x1a>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&hp_irq>;
> +
> + #sound-dai-cells = <1>;
> +
> + interrupt-parent = <&tlmm>;
> + interrupts = <101 IRQ_TYPE_EDGE_BOTH>;
> +
> + AVDD-supply = <&pp1800_alc5682>;
> + MICVDD-supply = <&pp3300_codec>;
> +
> + realtek,dmic1-data-pin = <1>;
> + realtek,dmic1-clk-pin = <2>;
> + realtek,jd-src = <1>;
> + realtek,dmic-clk-rate-hz = <2048000>;
> + };
> +};
> +
> +&lpass_cpu {
> + status = "okay";
Status is the last property.
> +
> + pinctrl-names = "default";
> + pinctrl-0 = <&mi2s0_data0>, <&mi2s0_data1>, <&mi2s0_mclk>, <&mi2s0_sclk>, <&mi2s0_ws>,
> + <&mi2s1_data0>, <&mi2s1_sclk>, <&mi2s1_ws>;
> +
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + dai-link@0 {
> + reg = <MI2S_PRIMARY>;
> + qcom,playback-sd-lines = <1>;
> + qcom,capture-sd-lines = <0>;
> + };
> +
> + dai-link@1 {
> + reg = <MI2S_SECONDARY>;
> + qcom,playback-sd-lines = <0>;
> + };
> +
> + dai-link@5 {
> + reg = <LPASS_DP_RX>;
> + };
> +
> + dai-link@25 {
> + reg = <LPASS_CDC_DMA_VA_TX0>;
> + };
> +};
> +
> +&lpass_va_macro {
> + status = "okay";
Status is the last property.
Best regards,
Krzysztof
