Add -state suffix to GPIOs states node names as required by dt-bindings.
Signed-off-by: Vincent Knecht <vincent.knecht@xxxxxxxxxx>
---
.../boot/dts/qcom/msm8916-alcatel-idol347.dts | 14 +++++++-------
1 file changed, 7 insertions(+), 7 deletions(-)
diff --git a/arch/arm64/boot/dts/qcom/msm8916-alcatel-idol347.dts b/arch/arm64/boot/dts/qcom/msm8916-alcatel-idol347.dts
index 3dc9619fde6e..668f8ff53229 100644
--- a/arch/arm64/boot/dts/qcom/msm8916-alcatel-idol347.dts
+++ b/arch/arm64/boot/dts/qcom/msm8916-alcatel-idol347.dts
@@ -260,7 +260,7 @@ l18 {
};
&msmgpio {
- accel_int_default: accel-int-default {
+ accel_int_default: accel-int-default-state {
pins = "gpio31";
function = "gpio";
@@ -268,7 +268,7 @@ accel_int_default: accel-int-default {
bias-disable;
};
- gpio_keys_default: gpio-keys-default {
+ gpio_keys_default: gpio-keys-default-state {
pins = "gpio107";
function = "gpio";
@@ -276,7 +276,7 @@ gpio_keys_default: gpio-keys-default {
bias-pull-up;
};
- gyro_int_default: gyro-int-default {
+ gyro_int_default: gyro-int-default-state {
pins = "gpio97", "gpio98";
function = "gpio";
@@ -284,7 +284,7 @@ gyro_int_default: gyro-int-default {
bias-disable;
};
- mag_reset_default: mag-reset-default {
+ mag_reset_default: mag-reset-default-state {
pins = "gpio8";
function = "gpio";
@@ -292,7 +292,7 @@ mag_reset_default: mag-reset-default {
bias-disable;
};
- proximity_int_default: proximity-int-default {
+ proximity_int_default: proximity-int-default-state {
pins = "gpio12";
function = "gpio";
@@ -300,7 +300,7 @@ proximity_int_default: proximity-int-default {
bias-pull-up;
};
- ts_int_reset_default: ts-int-reset-default {
+ ts_int_reset_default: ts-int-reset-default-state {
pins = "gpio13", "gpio100";
function = "gpio";
@@ -308,7 +308,7 @@ ts_int_reset_default: ts-int-reset-default {
bias-disable;
};
- usb_id_default: usb-id-default {
+ usb_id_default: usb-id-default-state {
pins = "gpio69";
function = "gpio";
--
2.38.1
