Add crypto clock control and ungate it before CQHCI init. Signed-off-by: Mengqi Zhang <mengqi.zhang@xxxxxxxxxxxx> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@xxxxxxxxxxxxx> --- drivers/mmc/host/mtk-sd.c | 12 ++++++++++++ 1 file changed, 12 insertions(+) diff --git a/drivers/mmc/host/mtk-sd.c b/drivers/mmc/host/mtk-sd.c index 3f7f3a1e0df8..652a67f9b054 100644 --- a/drivers/mmc/host/mtk-sd.c +++ b/drivers/mmc/host/mtk-sd.c @@ -452,6 +452,7 @@ struct msdc_host { struct clk *bus_clk; /* bus clock which used to access register */ struct clk *src_clk_cg; /* msdc source clock control gate */ struct clk *sys_clk_cg; /* msdc subsys clock control gate */ + struct clk *crypto_clk; /* msdc crypto clock control gate */ struct clk_bulk_data bulk_clks[MSDC_NR_CLOCKS]; u32 mclk; /* mmc subsystem clock frequency */ u32 src_clk_freq; /* source clock frequency */ @@ -840,6 +841,7 @@ static void msdc_set_busy_timeout(struct msdc_host *host, u64 ns, u64 clks) static void msdc_gate_clock(struct msdc_host *host) { clk_bulk_disable_unprepare(MSDC_NR_CLOCKS, host->bulk_clks); + clk_disable_unprepare(host->crypto_clk); clk_disable_unprepare(host->src_clk_cg); clk_disable_unprepare(host->src_clk); clk_disable_unprepare(host->bus_clk); @@ -855,6 +857,7 @@ static int msdc_ungate_clock(struct msdc_host *host) clk_prepare_enable(host->bus_clk); clk_prepare_enable(host->src_clk); clk_prepare_enable(host->src_clk_cg); + clk_prepare_enable(host->crypto_clk); ret = clk_bulk_prepare_enable(MSDC_NR_CLOCKS, host->bulk_clks); if (ret) { dev_err(host->dev, "Cannot enable pclk/axi/ahb clock gates\n"); @@ -2672,6 +2675,15 @@ static int msdc_drv_probe(struct platform_device *pdev) goto host_free; } + /* only eMMC has crypto property */ + if (!(mmc->caps2 & MMC_CAP2_NO_MMC)) { + host->crypto_clk = devm_clk_get_optional(&pdev->dev, "crypto"); + if (IS_ERR(host->crypto_clk)) + host->crypto_clk = NULL; + else + mmc->caps2 |= MMC_CAP2_CRYPTO; + } + host->irq = platform_get_irq(pdev, 0); if (host->irq < 0) { ret = -EINVAL; -- 2.25.1