Hi Krzysztof,
On Wed, Nov 02, 2022 at 02:52:32PM -0400, Krzysztof Kozlowski wrote:
> Some boards use SJA1105 Ethernet Switch with SPI CPOL and CPHA, so
> document this to fix dtbs_check warnings:
>
> arch/arm64/boot/dts/freescale/fsl-lx2160a-bluebox3.dtb: ethernet-switch@0: Unevaluated properties are not allowed ('spi-cpol' was unexpected)
>
> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
>
> ---
>
> Changes since v1:
> 1. Add also cpha
> ---
> Documentation/devicetree/bindings/net/dsa/nxp,sja1105.yaml | 3 +++
> 1 file changed, 3 insertions(+)
>
> diff --git a/Documentation/devicetree/bindings/net/dsa/nxp,sja1105.yaml b/Documentation/devicetree/bindings/net/dsa/nxp,sja1105.yaml
> index 1e26d876d146..3debbf0f3789 100644
> --- a/Documentation/devicetree/bindings/net/dsa/nxp,sja1105.yaml
> +++ b/Documentation/devicetree/bindings/net/dsa/nxp,sja1105.yaml
> @@ -36,6 +36,9 @@ properties:
> reg:
> maxItems: 1
>
> + spi-cpha: true
> + spi-cpol: true
> +
> # Optional container node for the 2 internal MDIO buses of the SJA1110
> # (one for the internal 100base-T1 PHYs and the other for the single
> # 100base-TX PHY). The "reg" property does not have physical significance.
> --
> 2.34.1
>
Don't these belong to spi-peripheral-props.yaml?
