Changes since v1: - remove i2c interconnects (4/4) - change regulator phandle names (4/4) - change regulators node names (4/4) - remove clock-output-names from xo-board (4/4) - remove vdd-supply from touchscreen (4/4) - move clocks to device dts (4/4) - reorder pmic nodes, root nodes, and phandle references in dts (4/4) - move status properties to bottom of nodes (4/4) - accumulate commit message tags (1-3/4) Do not apply this series yet. It is only for review comments. It can be applied once the "qcom,sdm670-smmu-500" compatible string gets added (or now if you don't care about handling an unnecessary quirk). This adds the device trees and bindings to support the Qualcomm Snapdragon 670 and Google Pixel 3a. This patch series, specifically the last patch, depends on: [PATCH v4 0/3] SDM670 Global Clocks https://lore.kernel.org/all/20220914013922.198778-1-mailingradian@xxxxxxxxx/T/ [PATCH v2 0/2] RPMh Support for PM660 and PM660L https://lore.kernel.org/all/20220920223331.150635-1-mailingradian@xxxxxxxxx/T/ [PATCH v2 0/2] SDM670 RPMh Clocks https://lore.kernel.org/all/20220920223734.151135-1-mailingradian@xxxxxxxxx/T/ [PATCH v2 0/2] SDM670 USB 2.0 support https://lore.kernel.org/all/20220922024656.178529-1-mailingradian@xxxxxxxxx/T/ [PATCH 0/2] SDM670 SDHCI support https://lore.kernel.org/all/20220923014322.33620-1-mailingradian@xxxxxxxxx/T/ [PATCH v2 0/2] SDM670 Power Domains https://lore.kernel.org/all/20221004221130.14076-1-mailingradian@xxxxxxxxx/T/ [PATCH v10 0/3] SDM670 Pin Control Driver https://lore.kernel.org/all/20221014001934.4995-1-mailingradian@xxxxxxxxx/T/ [PATCH v6 0/4] SDM670 GPI DMA support https://lore.kernel.org/all/20221018005740.23952-1-mailingradian@xxxxxxxxx/T/ [RFC PATCH 0/9] iommy/arm-smmu-qcom: Rework Qualcomm SMMU bindings and implementation https://lore.kernel.org/linux-iommu/73eee2ed-f8ee-f136-2853-34b27c099644@xxxxxxxxxxx/T/ Richard Acayan (4): dt-bindings: arm: cpus: add qcom kryo 360 compatible dt-bindings: arm: qcom: add sdm670 and pixel 3a compatible dt-bindings: firmware: scm: add sdm670 compatible arm64: dts: qcom: add sdm670 and pixel 3a device trees .../devicetree/bindings/arm/cpus.yaml | 1 + .../devicetree/bindings/arm/qcom.yaml | 6 + .../bindings/firmware/qcom,scm.yaml | 1 + arch/arm64/boot/dts/qcom/Makefile | 1 + .../boot/dts/qcom/sdm670-google-sargo.dts | 532 ++++++++ arch/arm64/boot/dts/qcom/sdm670.dtsi | 1169 +++++++++++++++++ 6 files changed, 1710 insertions(+) create mode 100644 arch/arm64/boot/dts/qcom/sdm670-google-sargo.dts create mode 100644 arch/arm64/boot/dts/qcom/sdm670.dtsi P.S.: Thank you to all the maintainers and reviewers who went through everything and made helpful comments! -- 2.38.1
