On Thu, Nov 03, 2022 at 03:31:17PM +0100, Rasmus Villemoes wrote:
> The dp83867 has three LED_X pins that can be used to drive LEDs. They
> are by default driven active high, but on some boards the reverse is
> needed. Add bindings to allow a board to specify that they should be
> active low.
Somebody really does need to finish the PHY LEDs via /sys/class/leds.
It looks like this would then be a reasonable standard property:
active-low, not a vendor property.
Please help out with the PHY LEDs patches.
Andrew
