This is not a fix on its own but more a cleanup. Phy qmp pcie driver
currently have a workaround to handle pcs_misc not declared and add
0x400 offset to the pcs reg if pcs_misc is not declared.
Correctly declare pcs_misc reg and reduce PCS size to the common value
of 0x1f0 as done for every other qmp based pcie phy device.
Signed-off-by: Christian Marangi <ansuelsmth@xxxxxxxxx>
---
arch/arm64/boot/dts/qcom/ipq6018.dtsi | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/arch/arm64/boot/dts/qcom/ipq6018.dtsi b/arch/arm64/boot/dts/qcom/ipq6018.dtsi
index 9ebb9e2371b1..95d7f49bc61a 100644
--- a/arch/arm64/boot/dts/qcom/ipq6018.dtsi
+++ b/arch/arm64/boot/dts/qcom/ipq6018.dtsi
@@ -406,7 +406,8 @@ pcie_phy: phy@84000 {
pcie_phy0: phy@84200 {
reg = <0x0 0x84200 0x0 0x16c>, /* Serdes Tx */
<0x0 0x84400 0x0 0x200>, /* Serdes Rx */
- <0x0 0x84800 0x0 0x4f4>; /* PCS: Lane0, COM, PCIE */
+ <0x0 0x84800 0x0 0x1f0>; /* PCS: Lane0, COM, PCIE */
+ <0x0 0x84c00 0x0 0xf4>; /* pcs_misc */
#phy-cells = <0>;
clocks = <&gcc GCC_PCIE0_PIPE_CLK>;
--
2.37.2
