> Il 03/11/22 10:28, Lorenzo Bianconi ha scritto:
> > Similar to TX Wireless Ethernet Dispatch, introduce RX Wireless Ethernet
> > Dispatch to offload traffic received by the wlan interface to lan/wan
> > one.
> >
> > Co-developed-by: Sujuan Chen <sujuan.chen@xxxxxxxxxxxx>
> > Signed-off-by: Sujuan Chen <sujuan.chen@xxxxxxxxxxxx>
> > Signed-off-by: Lorenzo Bianconi <lorenzo@xxxxxxxxxx>
>
> Hello Lorenzo,
> thanks for the patch! However, there's something to improve...
>
> > ---
> > arch/arm64/boot/dts/mediatek/mt7986a.dtsi | 75 +++++++++++++++++++++++
> > 1 file changed, 75 insertions(+)
> >
> > diff --git a/arch/arm64/boot/dts/mediatek/mt7986a.dtsi b/arch/arm64/boot/dts/mediatek/mt7986a.dtsi
> > index 72e0d9722e07..b0a593c6020e 100644
> > --- a/arch/arm64/boot/dts/mediatek/mt7986a.dtsi
> > +++ b/arch/arm64/boot/dts/mediatek/mt7986a.dtsi
>
> ..snip..
>
> > @@ -226,6 +252,12 @@ ethsys: syscon@15000000 {
> > reg = <0 0x15000000 0 0x1000>;
> > #clock-cells = <1>;
> > #reset-cells = <1>;
> > +
> > + ethsysrst: reset-controller {
>
> That's not right. It works, yes, but your ethsys rightfully declares #reset-cells,
> because it is supposed to also be a reset controller (even though I don't see any
> reset controller registering action in clk-mt7986-eth.c).
>
> Please document the ethernet reset in the appropriate dt-bindings header and
> register the reset controller in clk-mt7986-eth.c.
>
> Finally, you won't need any "ti,syscon-reset" node, and resets will look like
>
> resets = <ðsys MT7986_ETHSYS_SOMETHING_SWRST>;
>
> If you need any hint about how to do that, please check clk-mt8195-infra_ao.c.
Hi Angelo,
Thx for the review. This is not strictly related to the wed rx support added in this
series, anyway I will look into it in the next revision.
Regards,
Lorenzo
>
> Regards,
> Angelo
>
Attachment:
signature.asc
Description: PGP signature
