[RFC 0/2] Add support for SCMI QTI Memlat Vendor Protocol

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



The patch series documents the bindings and adds support for the
SCMI QTI memlat (memory latency) vendor protocol. The protocol takes
in several tuneables including the IPM ratio (Instructions Per Miss),
bus bandwidth requirements and PMU maps to enable frequency scaling
of various buses (L3/LLCC/DDR). The scaling is performed by the HW
memory latency governor running on the CPUSS Control Processor.

Depends on CPUCP mailbox driver:
https://patchwork.kernel.org/project/linux-arm-msm/cover/1663135386-26270-1-git-send-email-quic_sibis@xxxxxxxxxxx/

Sibi Sankar (2):
  dt-bindings: firmware: arm,scmi: Add support for memlat vendor
    protocol
  firmware: arm_scmi: Add SCMI QTI Memlat vendor protocol

 .../devicetree/bindings/firmware/arm,scmi.yaml     | 164 +++++++++++++
 drivers/firmware/arm_scmi/Kconfig                  |  10 +
 drivers/firmware/arm_scmi/Makefile                 |   1 +
 drivers/firmware/arm_scmi/qcom_memlat_vendor.c     | 269 +++++++++++++++++++++
 include/linux/scmi_protocol.h                      |  36 +++
 5 files changed, 480 insertions(+)
 create mode 100644 drivers/firmware/arm_scmi/qcom_memlat_vendor.c

-- 
2.7.4




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux