Add the display backlight for the Asurada platform. It relies on the display PWM controller, so also enable and configure this component. Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@xxxxxxxxxxxxx> Tested-by: Chen-Yu Tsai <wenst@xxxxxxxxxxxx> Signed-off-by: Nícolas F. R. A. Prado <nfraprado@xxxxxxxxxxxxx> --- (no changes since v1) .../boot/dts/mediatek/mt8192-asurada.dtsi | 28 +++++++++++++++++++ 1 file changed, 28 insertions(+) diff --git a/arch/arm64/boot/dts/mediatek/mt8192-asurada.dtsi b/arch/arm64/boot/dts/mediatek/mt8192-asurada.dtsi index fafca7428539..666021ca4d4f 100644 --- a/arch/arm64/boot/dts/mediatek/mt8192-asurada.dtsi +++ b/arch/arm64/boot/dts/mediatek/mt8192-asurada.dtsi @@ -23,6 +23,16 @@ memory@40000000 { reg = <0 0x40000000 0 0x80000000>; }; + backlight_lcd0: backlight-lcd0 { + compatible = "pwm-backlight"; + pwms = <&pwm0 0 500000>; + power-supply = <&ppvar_sys>; + enable-gpios = <&pio 152 0>; + brightness-levels = <0 1023>; + num-interpolated-steps = <1023>; + default-brightness-level = <576>; + }; + pp1000_dpbrdg: regulator-1v0-dpbrdg { compatible = "regulator-fixed"; regulator-name = "pp1000_dpbrdg"; @@ -838,6 +848,17 @@ pins-pcie-en-pp3300-wlan { }; }; + pwm0_pins: pwm0-default-pins { + pins-pwm { + pinmux = <PINMUX_GPIO40__FUNC_DISP_PWM>; + }; + + pins-inhibit { + pinmux = <PINMUX_GPIO152__FUNC_GPIO152>; + output-high; + }; + }; + scp_pins: scp-pins { pins-vreq-vao { pinmux = <PINMUX_GPIO195__FUNC_SCP_VREQ_VAO>; @@ -899,6 +920,13 @@ &pmic { interrupts-extended = <&pio 214 IRQ_TYPE_LEVEL_HIGH>; }; +&pwm0 { + status = "okay"; + + pinctrl-names = "default"; + pinctrl-0 = <&pwm0_pins>; +}; + &scp { status = "okay"; -- 2.38.1