On Tue, Oct 11, 2022 at 02:25:01PM -0700, Tanmay Shah wrote: > This driver enables r5f dual core Real time Processing Unit subsystem > available on Xilinx Zynq Ultrascale MPSoC Platform. RPU subsystem > (cluster) can be configured in different modes e.g. split mode in which > two r5f cores work independent of each other and lock-step mode in which > both r5f cores execute same code clock-for-clock and notify if the > result is different. > > The Xilinx r5 Remoteproc Driver boots the RPU cores via calls to the Xilinx > Platform Management Unit that handles the R5 configuration, memory access > and R5 lifecycle management. The interface to this manager is done in this > driver via zynqmp_pm_* function calls. > > Signed-off-by: Ben Levinsky <ben.levinsky@xxxxxxx> > Signed-off-by: Tanmay Shah <tanmay.shah@xxxxxxx> > Reported-by: kernel test robot <lkp@xxxxxxxxx> > --- > > Changes in v10: > - fix Kconfig unmet dependecy error reported by kernel test robot > - fix r5_rproc object mem leak in function zynqmp_r5_add_rproc_core > - add explanation of hardcoded TCM nodes > - remove redundant ToDo comment > - remove redundant check of tcm_bank_count and rmem_count > - remove explicit free reserved_mem in zynqmp_r5_get_mem_region_node > - fix leaked reference of child_dev during zynqmp_r5_cluster_init > Also fix possible crash in exit path release_r5_cores > - do not remove mem-region and tcm carveouts explicitly in case of failure. > It will be deleted as part of rproc_del. This also simplifies logic to > use rproc_add_carveout > - fix documentation all over the driver > > Changes in v9 > - replace devm_rproc_alloc with rproc_alloc > - %s/until/while/r > - remove extra line > - %s/i > -1/i >=0/r fix this throughout the driver > - fix type of tcm_mode from int to enum rpu_tcm_comb > - release &child_pdev->dev references in case of failure > - remove zynqmp_r5_core_exit() > - undefined memory-region property isn't driver failure > - remove tcm bank count check from ops > - fix tcm bank turn-off sequence > - fix parse_fw function documentation > - do not use rproc_mem_entry_init on vdev0buffers > - declare variabls in reverse xmas tree order throughout the driver > > Changes in v8: > - None > > Changes in v7: > - None > > Changes in v6: > - None > > Changes in v5: > - None > > Changes in v4: > - Remove redundant header files > - use dev_err_probe() to report errors during probe > - Fix missing check on error code returned by zynqmp_r5_add_rproc_core() > - Fix memory leaks all over the driver when resource allocation fails for any core > - make cluster mode check only at one place > - remove redundant initialization of variable > - remove redundant use of of_node_put() > - Fix Comment format problem > - Assign offset of zynqmp_tcm_banks instead of duplicating it > - Add tcm and memory regions rproc carveouts during prepare instead of parse_fw > - Remove rproc_mem_entry object from r5_core > - Use put_device() and rproc_del() APIs to fix memory leaks > - Replace pr_* with dev_*. This was missed in v3, fix now. > - Use "GPL" instead of "GPL v2" in MODULE_LICENSE macro. This was suggested by checkpatch script. > > Changes in v3: > - Fix checkpatch script indentation warning > - Remove unused variable from xilinx remoteproc driver > - use C style comments, i.e /*...*/ > - Remove redundant debug information which can be derived using /proc/device-tree > - Fix multilined comment format > - s/"final fot TCM"/"final for TCM" > - Function devm_kzalloc() does not return an code on error, just NULL. > Remove redundant error check for this function throughout the driver. > - Fix RPU mode configuration and add documentation accordingly > - Get rid of the indentations to match function documentation style with rest of the driver > - Fix memory leak by only using r5_rproc->priv and not replace it with new instance > - Use 'i' for the outer loop and 'j' for the inner one as per convention > - Remove redundant error and NULL checks throughout the driver > - Use devm_kcalloc() when more than one element is required > - Add memory-regions carveouts during driver probe instead of parse_fw call > This removes redundant copy of reserved_mem object in r5_core structure. > - Fix memory leak by using of_node_put() > - Fix indentation of tcm_mem_map function args > - Remove redundant init of variables > - Initialize tcm bank size variable for lockstep mode > - Replace u32 with phys_addr_t for variable stroing memory bank address > - Add documentation of TCM behavior in lockstep mode > - Use dev_get_drvdata instead of platform driver API > - Remove info level messages > - Fix checkpatch.pl warnings > - Add documentation for the Xilinx r5f platform to understand driver design > > drivers/remoteproc/Kconfig | 13 + > drivers/remoteproc/Makefile | 1 + > drivers/remoteproc/xlnx_r5_remoteproc.c | 1066 +++++++++++++++++++++++ > 3 files changed, 1080 insertions(+) > create mode 100644 drivers/remoteproc/xlnx_r5_remoteproc.c > > diff --git a/drivers/remoteproc/Kconfig b/drivers/remoteproc/Kconfig > index 166019786653..a850e9f486dd 100644 > --- a/drivers/remoteproc/Kconfig > +++ b/drivers/remoteproc/Kconfig > @@ -352,6 +352,19 @@ config TI_K3_R5_REMOTEPROC > It's safe to say N here if you're not interested in utilizing > a slave processor. > > +config XLNX_R5_REMOTEPROC > + tristate "Xilinx R5 remoteproc support" > + depends on PM && ARCH_ZYNQMP > + select ZYNQMP_FIRMWARE > + select RPMSG_VIRTIO > + select MAILBOX > + select ZYNQMP_IPI_MBOX > + help > + Say y or m here to support Xilinx R5 remote processors via the remote > + processor framework. > + > + It's safe to say N if not interested in using RPU r5f cores. > + > endif # REMOTEPROC > > endmenu > diff --git a/drivers/remoteproc/Makefile b/drivers/remoteproc/Makefile > index 5478c7cb9e07..91314a9b43ce 100644 > --- a/drivers/remoteproc/Makefile > +++ b/drivers/remoteproc/Makefile > @@ -38,3 +38,4 @@ obj-$(CONFIG_ST_SLIM_REMOTEPROC) += st_slim_rproc.o > obj-$(CONFIG_STM32_RPROC) += stm32_rproc.o > obj-$(CONFIG_TI_K3_DSP_REMOTEPROC) += ti_k3_dsp_remoteproc.o > obj-$(CONFIG_TI_K3_R5_REMOTEPROC) += ti_k3_r5_remoteproc.o > +obj-$(CONFIG_XLNX_R5_REMOTEPROC) += xlnx_r5_remoteproc.o > diff --git a/drivers/remoteproc/xlnx_r5_remoteproc.c b/drivers/remoteproc/xlnx_r5_remoteproc.c > new file mode 100644 > index 000000000000..dc7d75c1070a > --- /dev/null > +++ b/drivers/remoteproc/xlnx_r5_remoteproc.c > @@ -0,0 +1,1066 @@ > +// SPDX-License-Identifier: GPL-2.0 > +/* > + * ZynqMP R5 Remote Processor driver > + * > + */ > + > +#include <dt-bindings/power/xlnx-zynqmp-power.h> > +#include <linux/dma-mapping.h> > +#include <linux/firmware/xlnx-zynqmp.h> > +#include <linux/kernel.h> > +#include <linux/module.h> > +#include <linux/of_address.h> > +#include <linux/of_platform.h> > +#include <linux/of_reserved_mem.h> > +#include <linux/platform_device.h> > +#include <linux/remoteproc.h> > +#include <linux/slab.h> > + > +#include "remoteproc_internal.h" > + > +/* > + * settings for RPU cluster mode which > + * reflects possible values of xlnx,cluster-mode dt-property > + */ > +enum zynqmp_r5_cluster_mode { > + SPLIT_MODE = 0, /* When cores run as separate processor */ > + LOCKSTEP_MODE = 1, /* cores execute same code in lockstep,clk-for-clk */ > + SINGLE_CPU_MODE = 2, /* core0 is held in reset and only core1 runs */ > +}; > + > +/** > + * struct mem_bank_data - Memory Bank description > + * > + * @addr: Start address of memory bank > + * @size: Size of Memory bank > + * @pm_domain_id: Power-domains id of memory bank for firmware to turn on/off > + * @bank_name: name of the bank for remoteproc framework > + */ > +struct mem_bank_data { > + phys_addr_t addr; > + size_t size; > + u32 pm_domain_id; > + char *bank_name; > +}; > + > +/* > + * Hardcoded TCM bank values. This will be removed once TCM bindings are > + * accepted for system-dt specifications and upstreamed in linux kernel > + */ > +static const struct mem_bank_data zynqmp_tcm_banks[] = { > + {0xffe00000UL, 0x10000UL, PD_R5_0_ATCM, "atcm0"}, /* TCM 64KB each */ > + {0xffe20000UL, 0x10000UL, PD_R5_0_BTCM, "btcm0"}, > + {0xffe90000UL, 0x10000UL, PD_R5_1_ATCM, "atcm1"}, > + {0xffeb0000UL, 0x10000UL, PD_R5_1_BTCM, "btcm1"}, > +}; > + > +/** > + * struct zynqmp_r5_core > + * > + * @dev: device of RPU instance > + * @np: device node of RPU instance > + * @tcm_bank_count: number TCM banks accessible to this RPU > + * @tcm_banks: array of each TCM bank data > + * @rmem_count: Number of reserved mem regions > + * @rmem: reserved memory region nodes from device tree > + * @rproc: rproc handle > + * @pm_domain_id: RPU CPU power domain id > + */ > +struct zynqmp_r5_core { > + struct device *dev; > + struct device_node *np; > + int tcm_bank_count; > + struct mem_bank_data **tcm_banks; > + int rmem_count; > + struct reserved_mem **rmem; > + struct rproc *rproc; > + u32 pm_domain_id; > +}; > + > +/** > + * struct zynqmp_r5_cluster > + * > + * @dev: r5f subsystem cluster device node > + * @mode: cluster mode of type zynqmp_r5_cluster_mode > + * @core_count: number of r5 cores used for this cluster mode > + * @r5_cores: Array of pointers pointing to r5 core > + */ > +struct zynqmp_r5_cluster { > + struct device *dev; > + enum zynqmp_r5_cluster_mode mode; > + int core_count; > + struct zynqmp_r5_core **r5_cores; > +}; > + > +/* > + * zynqmp_r5_set_mode() > + * > + * set RPU cluster and TCM operation mode > + * > + * @r5_core: pointer to zynqmp_r5_core type object > + * @fw_reg_val: value expected by firmware to configure RPU cluster mode > + * @tcm_mode: value expected by fw to configure TCM mode (lockstep or split) > + * > + * Return: 0 for success and < 0 for failure > + */ > +static int zynqmp_r5_set_mode(struct zynqmp_r5_core *r5_core, > + enum rpu_oper_mode fw_reg_val, > + enum rpu_tcm_comb tcm_mode) > +{ > + int ret; > + > + ret = zynqmp_pm_set_rpu_mode(r5_core->pm_domain_id, fw_reg_val); > + if (ret < 0) { > + dev_err(r5_core->dev, "failed to set RPU mode\n"); > + return ret; > + } > + > + ret = zynqmp_pm_set_tcm_config(r5_core->pm_domain_id, tcm_mode); > + if (ret < 0) > + dev_err(r5_core->dev, "failed to configure TCM\n"); > + > + return ret; > +} > + > +/* > + * zynqmp_r5_rproc_start() > + * @rproc: single R5 core's corresponding rproc instance > + * > + * Start R5 Core from designated boot address. > + * > + * return 0 on success, otherwise non-zero value on failure > + */ > +static int zynqmp_r5_rproc_start(struct rproc *rproc) > +{ > + struct zynqmp_r5_core *r5_core = rproc->priv; > + enum rpu_boot_mem bootmem; > + int ret; > + > + /* > + * The exception vector pointers (EVP) refer to the base-address of > + * exception vectors (for reset, IRQ, FIQ, etc). The reset-vector > + * starts at the base-address and subsequent vectors are on 4-byte > + * boundaries. > + * > + * Exception vectors can start either from 0x0000_0000 (LOVEC) or > + * from 0xFFFF_0000 (HIVEC) which is mapped in the OCM (On-Chip Memory) > + * > + * Usually firmware will put Exception vectors at LOVEC. > + * > + * It is not recommend that you change the exception vector. > + * Changing the EVP to HIVEC will result in increased interrupt latency > + * and jitter. Also, if the OCM is secured and the Cortex-R5F processor > + * is non-secured, then the Cortex-R5F processor cannot access the > + * HIVEC exception vectors in the OCM. > + */ > + bootmem = (rproc->bootaddr >= 0xFFFC0000) ? > + PM_RPU_BOOTMEM_HIVEC : PM_RPU_BOOTMEM_LOVEC; > + > + dev_dbg(r5_core->dev, "RPU boot addr 0x%llx from %s.", rproc->bootaddr, > + bootmem == PM_RPU_BOOTMEM_HIVEC ? "OCM" : "TCM"); > + > + ret = zynqmp_pm_request_wake(r5_core->pm_domain_id, 1, > + bootmem, ZYNQMP_PM_REQUEST_ACK_NO); > + if (ret) > + dev_err(r5_core->dev, > + "failed to start RPU = 0x%x\n", r5_core->pm_domain_id); > + return ret; > +} > + > +/* > + * zynqmp_r5_rproc_stop() > + * @rproc: single R5 core's corresponding rproc instance > + * > + * Power down R5 Core. > + * > + * return 0 on success, otherwise non-zero value on failure > + */ > +static int zynqmp_r5_rproc_stop(struct rproc *rproc) > +{ > + struct zynqmp_r5_core *r5_core = rproc->priv; > + int ret; > + > + ret = zynqmp_pm_force_pwrdwn(r5_core->pm_domain_id, > + ZYNQMP_PM_REQUEST_ACK_BLOCKING); > + if (ret) > + dev_err(r5_core->dev, "failed to stop remoteproc RPU %d\n", ret); > + > + return ret; > +} > + > +/* > + * zynqmp_r5_mem_region_map() > + * @rproc: single R5 core's corresponding rproc instance > + * @mem: mem descriptor to map reserved memory-regions > + * > + * Callback to map va for memory-region's carveout. > + * > + * return 0 on success, otherwise non-zero value on failure > + */ > +static int zynqmp_r5_mem_region_map(struct rproc *rproc, > + struct rproc_mem_entry *mem) > +{ > + void __iomem *va; > + > + va = ioremap_wc(mem->dma, mem->len); > + if (IS_ERR_OR_NULL(va)) > + return -ENOMEM; > + > + mem->va = (void *)va; > + > + return 0; > +} > + > +/* > + * zynqmp_r5_rproc_mem_unmap > + * @rproc: single R5 core's corresponding rproc instance > + * @mem: mem entry to unmap > + * > + * Unmap memory-region carveout > + * > + * return: always returns 0 > + */ > +static int zynqmp_r5_mem_region_unmap(struct rproc *rproc, > + struct rproc_mem_entry *mem) > +{ > + iounmap((void __iomem *)mem->va); > + return 0; > +} > + > +/* > + * add_mem_regions_carveout() > + * @rproc: single R5 core's corresponding rproc instance > + * > + * Construct rproc mem carveouts from memory-region property nodes > + * > + * return 0 on success, otherwise non-zero value on failure > + */ > +static int add_mem_regions_carveout(struct rproc *rproc) > +{ > + struct rproc_mem_entry *rproc_mem; > + struct zynqmp_r5_core *r5_core; > + struct reserved_mem *rmem; > + int i, num_mem_regions; > + > + r5_core = (struct zynqmp_r5_core *)rproc->priv; > + num_mem_regions = r5_core->rmem_count; > + > + for (i = 0; i < num_mem_regions; i++) { > + rmem = r5_core->rmem[i]; > + > + if (!strncmp(rmem->name, "vdev0buffer", strlen("vdev0buffer"))) { > + /* Init reserved memory for vdev buffer */ > + rproc_mem = rproc_of_resm_mem_entry_init(&rproc->dev, i, > + rmem->size, > + rmem->base, > + rmem->name); > + } else { > + /* Register associated reserved memory regions */ > + rproc_mem = rproc_mem_entry_init(&rproc->dev, NULL, > + (dma_addr_t)rmem->base, > + rmem->size, rmem->base, > + zynqmp_r5_mem_region_map, > + zynqmp_r5_mem_region_unmap, > + rmem->name); > + } > + > + if (!rproc_mem) > + return -ENOMEM; > + > + rproc_add_carveout(rproc, rproc_mem); > + > + dev_dbg(&rproc->dev, "reserved mem carveout %s addr=%llx, size=0x%llx", > + rmem->name, rmem->base, rmem->size); > + } > + > + return 0; > +} > + > +/* > + * tcm_mem_unmap() > + * @rproc: single R5 core's corresponding rproc instance > + * @mem: tcm mem entry to unmap > + * > + * Unmap TCM banks when powering down R5 core. > + * > + * return always 0 > + */ > +static int tcm_mem_unmap(struct rproc *rproc, struct rproc_mem_entry *mem) > +{ > + iounmap((void __iomem *)mem->va); > + > + return 0; > +} > + > +/* > + * tcm_mem_map() > + * @rproc: single R5 core's corresponding rproc instance > + * @mem: tcm memory entry descriptor > + * > + * Given TCM bank entry, this func setup virtual address for TCM bank > + * remoteproc carveout. It also takes care of va to da address translation > + * > + * return 0 on success, otherwise non-zero value on failure > + */ > +static int tcm_mem_map(struct rproc *rproc, > + struct rproc_mem_entry *mem) > +{ > + void __iomem *va; > + > + va = ioremap_wc(mem->dma, mem->len); > + if (IS_ERR_OR_NULL(va)) > + return -ENOMEM; > + > + /* Update memory entry va */ > + mem->va = (void *)va; > + > + /* clear TCMs */ > + memset_io(va, 0, mem->len); > + > + /* > + * The R5s expect their TCM banks to be at address 0x0 and 0x2000, > + * while on the Linux side they are at 0xffexxxxx. > + * > + * Zero out the high 12 bits of the address. This will give > + * expected values for TCM Banks 0A and 0B (0x0 and 0x20000). > + */ > + mem->da &= 0x000fffff; > + > + /* > + * TCM Banks 1A and 1B still have to be translated. > + * > + * Below handle these two banks' absolute addresses (0xffe90000 and > + * 0xffeb0000) and convert to the expected relative addresses > + * (0x0 and 0x20000). > + */ > + if (mem->da == 0x90000 || mem->da == 0xB0000) > + mem->da -= 0x90000; > + > + /* if translated TCM bank address is not valid report error */ > + if (mem->da != 0x0 && mem->da != 0x20000) { > + dev_err(&rproc->dev, "invalid TCM address: %x\n", mem->da); > + return -EINVAL; > + } > + return 0; > +} > + > +/* > + * add_tcm_carveout_split_mode() > + * @rproc: single R5 core's corresponding rproc instance > + * > + * allocate and add remoteproc carveout for TCM memory in split mode > + * > + * return 0 on success, otherwise non-zero value on failure > + */ > +static int add_tcm_carveout_split_mode(struct rproc *rproc) > +{ > + struct rproc_mem_entry *rproc_mem; > + struct zynqmp_r5_core *r5_core; > + int i, num_banks, ret; > + phys_addr_t bank_addr; > + struct device *dev; > + u32 pm_domain_id; > + size_t bank_size; > + char *bank_name; > + > + r5_core = (struct zynqmp_r5_core *)rproc->priv; > + dev = r5_core->dev; > + num_banks = r5_core->tcm_bank_count; > + > + /* > + * Power-on Each 64KB TCM, > + * register its address space, map and unmap functions > + * and add carveouts accordingly > + */ > + for (i = 0; i < num_banks; i++) { > + bank_addr = r5_core->tcm_banks[i]->addr; > + bank_name = r5_core->tcm_banks[i]->bank_name; > + bank_size = r5_core->tcm_banks[i]->size; > + pm_domain_id = r5_core->tcm_banks[i]->pm_domain_id; > + > + ret = zynqmp_pm_request_node(pm_domain_id, > + ZYNQMP_PM_CAPABILITY_ACCESS, 0, > + ZYNQMP_PM_REQUEST_ACK_BLOCKING); > + if (ret < 0) { > + dev_err(dev, "failed to turn on TCM 0x%x", pm_domain_id); > + goto release_tcm_split; > + } > + > + dev_dbg(dev, "TCM carveout split mode %s addr=%llx, size=0x%lx", > + bank_name, bank_addr, bank_size); > + > + rproc_mem = rproc_mem_entry_init(dev, NULL, bank_addr, > + bank_size, bank_addr, > + tcm_mem_map, tcm_mem_unmap, > + bank_name); > + if (!rproc_mem) { > + ret = -ENOMEM; > + zynqmp_pm_release_node(pm_domain_id); > + goto release_tcm_split; > + } > + > + rproc_add_carveout(rproc, rproc_mem); > + } > + > + return 0; > + > +release_tcm_split: > + /* If failed, Turn off all TCM banks turned on before */ > + for (i--; i >= 0; i--) { > + pm_domain_id = r5_core->tcm_banks[i]->pm_domain_id; > + zynqmp_pm_release_node(pm_domain_id); > + } > + return ret; > +} > + > +/* > + * add_tcm_carveout_lockstep_mode() > + * @rproc: single R5 core's corresponding rproc instance > + * > + * allocate and add remoteproc carveout for TCM memory in lockstep mode > + * > + * return 0 on success, otherwise non-zero value on failure > + */ > +static int add_tcm_carveout_lockstep_mode(struct rproc *rproc) > +{ > + struct rproc_mem_entry *rproc_mem; > + struct zynqmp_r5_core *r5_core; > + int i, num_banks, ret; > + phys_addr_t bank_addr; > + size_t bank_size = 0; > + struct device *dev; > + u32 pm_domain_id; > + char *bank_name; > + > + r5_core = (struct zynqmp_r5_core *)rproc->priv; > + dev = r5_core->dev; > + > + /* Go through zynqmp banks for r5 node */ > + num_banks = r5_core->tcm_bank_count; > + > + /* > + * In lockstep mode, TCM is contiguous memory block > + * However, each TCM block still needs to be enabled individually. > + * So, Enable each TCM block individually, but add their size > + * to create contiguous memory region. > + */ > + bank_addr = r5_core->tcm_banks[0]->addr; > + bank_name = r5_core->tcm_banks[0]->bank_name; > + > + for (i = 0; i < num_banks; i++) { > + bank_size += r5_core->tcm_banks[i]->size; > + pm_domain_id = r5_core->tcm_banks[i]->pm_domain_id; > + > + /* Turn on each TCM bank individually */ > + ret = zynqmp_pm_request_node(pm_domain_id, > + ZYNQMP_PM_CAPABILITY_ACCESS, 0, > + ZYNQMP_PM_REQUEST_ACK_BLOCKING); > + if (ret < 0) { > + dev_err(dev, "failed to turn on TCM 0x%x", pm_domain_id); > + goto release_tcm_lockstep; > + } > + } > + > + dev_dbg(dev, "TCM add carveout lockstep mode %s addr=0x%llx, size=0x%lx", > + bank_name, bank_addr, bank_size); > + > + /* Register TCM address range, TCM map and unmap functions */ > + rproc_mem = rproc_mem_entry_init(dev, NULL, bank_addr, > + bank_size, bank_addr, > + tcm_mem_map, tcm_mem_unmap, > + bank_name); > + if (!rproc_mem) { > + ret = -ENOMEM; > + goto release_tcm_lockstep; > + } > + > + /* If registration is success, add carveouts */ > + rproc_add_carveout(rproc, rproc_mem); > + > + return 0; > + > +release_tcm_lockstep: > + /* If failed, Turn off all TCM banks turned on before */ > + for (i--; i >= 0; i--) { > + pm_domain_id = r5_core->tcm_banks[i]->pm_domain_id; > + zynqmp_pm_release_node(pm_domain_id); > + } > + return ret; > +} > + > +/* > + * add_tcm_banks() > + * @rproc: single R5 core's corresponding rproc instance > + * > + * allocate and add remoteproc carveouts for TCM memory based on cluster mode > + * > + * return 0 on success, otherwise non-zero value on failure > + */ > +static int add_tcm_banks(struct rproc *rproc) > +{ > + struct zynqmp_r5_cluster *cluster; > + struct zynqmp_r5_core *r5_core; > + struct device *dev; > + > + r5_core = (struct zynqmp_r5_core *)rproc->priv; > + if (!r5_core) > + return -EINVAL; > + > + dev = r5_core->dev; > + > + cluster = dev_get_drvdata(dev->parent); > + if (!cluster) { > + dev_err(dev->parent, "Invalid driver data\n"); > + return -EINVAL; > + } > + > + /* > + * In lockstep mode TCM banks are one contiguous memory region of 256Kb > + * In split mode, each TCM bank is 64Kb and not contiguous. > + * We add memory carveouts accordingly. > + */ > + if (cluster->mode == SPLIT_MODE) > + return add_tcm_carveout_split_mode(rproc); > + else if (cluster->mode == LOCKSTEP_MODE) > + return add_tcm_carveout_lockstep_mode(rproc); > + > + return -EINVAL; > +} > + > +/* > + * zynqmp_r5_parse_fw() > + * @rproc: single R5 core's corresponding rproc instance > + * @fw: ptr to firmware to be loaded onto r5 core > + * > + * get resource table if available > + * > + * return 0 on success, otherwise non-zero value on failure > + */ > +static int zynqmp_r5_parse_fw(struct rproc *rproc, const struct firmware *fw) > +{ > + int ret; > + > + ret = rproc_elf_load_rsc_table(rproc, fw); > + if (ret == -EINVAL) { > + /* > + * resource table only required for IPC. > + * if not present, this is not necessarily an error; > + * for example, loading r5 hello world application > + * so simply inform user and keep going. > + */ > + dev_info(&rproc->dev, "no resource table found.\n"); > + ret = 0; > + } > + return ret; > +} > + > +/** > + * zynqmp_r5_rproc_prepare() > + * adds carveouts for TCM bank and reserved memory regions > + * > + * @rproc: Device node of each rproc > + * > + * Return: 0 for success else < 0 error code > + */ > +static int zynqmp_r5_rproc_prepare(struct rproc *rproc) > +{ > + int ret; > + > + ret = add_tcm_banks(rproc); > + if (ret) { > + dev_err(&rproc->dev, "failed to get TCM banks, err %d\n", ret); > + return ret; > + } > + > + ret = add_mem_regions_carveout(rproc); > + if (ret) { > + dev_err(&rproc->dev, "failed to get reserve mem regions %d\n", ret); > + return ret; > + } > + > + return 0; > +} > + > +/** > + * zynqmp_r5_rproc_unprepare() > + * Turns off TCM banks using power-domain id > + * > + * @rproc: Device node of each rproc > + * > + * Return: always 0 > + */ > +static int zynqmp_r5_rproc_unprepare(struct rproc *rproc) > +{ > + struct zynqmp_r5_core *r5_core; > + u32 pm_domain_id; > + int i; > + > + r5_core = (struct zynqmp_r5_core *)rproc->priv; > + > + for (i = 0; i < r5_core->tcm_bank_count; i++) { > + pm_domain_id = r5_core->tcm_banks[i]->pm_domain_id; > + if (zynqmp_pm_release_node(pm_domain_id)) > + dev_warn(r5_core->dev, > + "can't turn off TCM bank 0x%x", pm_domain_id); > + } > + > + return 0; > +} > + > +static const struct rproc_ops zynqmp_r5_rproc_ops = { > + .prepare = zynqmp_r5_rproc_prepare, > + .unprepare = zynqmp_r5_rproc_unprepare, > + .start = zynqmp_r5_rproc_start, > + .stop = zynqmp_r5_rproc_stop, > + .load = rproc_elf_load_segments, > + .parse_fw = zynqmp_r5_parse_fw, > + .find_loaded_rsc_table = rproc_elf_find_loaded_rsc_table, > + .sanity_check = rproc_elf_sanity_check, > + .get_boot_addr = rproc_elf_get_boot_addr, > +}; > + > +/** > + * zynqmp_r5_add_rproc_core() > + * Allocate and add struct rproc object for each r5f core > + * This is called for each individual r5f core > + * > + * @cdev: Device node of each r5 core > + * > + * Return: zynqmp_r5_core object for success else error code pointer > + */ > +static struct zynqmp_r5_core *zynqmp_r5_add_rproc_core(struct device *cdev) > +{ > + struct zynqmp_r5_core *r5_core; > + struct rproc *r5_rproc; > + int ret; > + > + /* Set up DMA mask */ > + ret = dma_set_coherent_mask(cdev, DMA_BIT_MASK(32)); > + if (ret) > + return ERR_PTR(ret); > + > + /* Allocate remoteproc instance */ > + r5_rproc = rproc_alloc(cdev, dev_name(cdev), > + &zynqmp_r5_rproc_ops, > + NULL, sizeof(struct zynqmp_r5_core)); > + if (!r5_rproc) { > + dev_err(cdev, "failed to allocate memory for rproc instance\n"); > + return ERR_PTR(-ENOMEM); > + } > + > + r5_rproc->auto_boot = false; > + r5_core = (struct zynqmp_r5_core *)r5_rproc->priv; > + r5_core->dev = cdev; > + r5_core->np = dev_of_node(cdev); > + if (!r5_core->np) { > + dev_err(cdev, "can't get device node for r5 core\n"); > + ret = -EINVAL; > + goto free_rproc; > + } > + > + /* Add R5 remoteproc core */ > + ret = rproc_add(r5_rproc); > + if (ret) { > + dev_err(cdev, "failed to add r5 remoteproc\n"); > + goto free_rproc; > + } > + > + r5_core->rproc = r5_rproc; > + return r5_core; > + > +free_rproc: > + rproc_free(r5_rproc); > + return ERR_PTR(ret); > +} > + > +/** > + * zynqmp_r5_get_tcm_node() > + * Ideally this function should parse tcm node and store information > + * in r5_core instance. For now, Hardcoded TCM information is used. > + * This approach is used as TCM bindings for system-dt is being developed > + * > + * @cluster: pointer to zynqmp_r5_cluster type object > + * > + * Return: 0 for success and < 0 error code for failure. > + */ > +static int zynqmp_r5_get_tcm_node(struct zynqmp_r5_cluster *cluster) > +{ > + struct device *dev = cluster->dev; > + struct zynqmp_r5_core *r5_core; > + int tcm_bank_count, tcm_node; > + int i, j; > + > + tcm_bank_count = ARRAY_SIZE(zynqmp_tcm_banks); > + > + /* count per core tcm banks */ > + tcm_bank_count = tcm_bank_count / cluster->core_count; > + > + /* > + * r5 core 0 will use all of TCM banks in lockstep mode. > + * In split mode, r5 core0 will use 128k and r5 core1 will use another > + * 128k. Assign TCM banks to each core accordingly > + */ > + tcm_node = 0; > + for (i = 0; i < cluster->core_count; i++) { > + r5_core = cluster->r5_cores[i]; > + r5_core->tcm_banks = devm_kcalloc(dev, tcm_bank_count, > + sizeof(struct mem_bank_data *), > + GFP_KERNEL); > + if (!r5_core->tcm_banks) > + return -ENOMEM; > + > + for (j = 0; j < tcm_bank_count; j++) { > + /* > + * Use pre-defined TCM reg values. > + * Eventually this should be replaced by values > + * parsed from dts. > + */ > + r5_core->tcm_banks[j] = > + (struct mem_bank_data *)&zynqmp_tcm_banks[tcm_node]; > + tcm_node++; > + } > + > + r5_core->tcm_bank_count = tcm_bank_count; > + } > + > + return 0; > +} > + > +/** > + * zynqmp_r5_get_mem_region_node() > + * parse memory-region property and get reserved mem regions > + * > + * @r5_core: pointer to zynqmp_r5_core type object > + * > + * Return: 0 for success and error code for failure. > + */ > +static int zynqmp_r5_get_mem_region_node(struct zynqmp_r5_core *r5_core) > +{ > + struct device_node *np, *rmem_np; > + struct reserved_mem **rmem; > + int res_mem_count, i; > + struct device *dev; > + > + dev = r5_core->dev; > + np = r5_core->np; > + > + res_mem_count = of_property_count_elems_of_size(np, "memory-region", > + sizeof(phandle)); > + if (res_mem_count <= 0) { > + dev_warn(dev, "failed to get memory-region property %d\n", > + res_mem_count); > + return 0; > + } > + > + rmem = devm_kcalloc(dev, res_mem_count, > + sizeof(struct reserved_mem *), GFP_KERNEL); > + if (!rmem) > + return -ENOMEM; > + > + for (i = 0; i < res_mem_count; i++) { > + rmem_np = of_parse_phandle(np, "memory-region", i); > + if (!rmem_np) > + goto release_rmem; > + > + rmem[i] = of_reserved_mem_lookup(rmem_np); Function of_reserved_mem_device_release() is never called for these. > + if (!rmem[i]) { > + of_node_put(rmem_np); > + goto release_rmem; > + } > + > + of_node_put(rmem_np); > + } > + > + r5_core->rmem_count = res_mem_count; > + r5_core->rmem = rmem; > + return 0; > + > +release_rmem: > + devm_kfree(dev, rmem); Not sure why this is needed when devm_kcalloc() is used... > + return -EINVAL; > +} > + > +/* > + * zynqmp_r5_core_init() > + * Create and initialize zynqmp_r5_core type object > + * > + * @cluster: pointer to zynqmp_r5_cluster type object > + * @fw_reg_val: value expected by firmware to configure RPU cluster mode > + * @tcm_mode: value expected by fw to configure TCM mode (lockstep or split) > + * > + * Return: 0 for success and error code for failure. > + */ > +static int zynqmp_r5_core_init(struct zynqmp_r5_cluster *cluster, > + enum rpu_oper_mode fw_reg_val, > + enum rpu_tcm_comb tcm_mode) > +{ > + struct device *dev = cluster->dev; > + struct zynqmp_r5_core *r5_core; > + int ret, i; > + > + ret = zynqmp_r5_get_tcm_node(cluster); > + if (ret < 0) { > + dev_err(dev, "can't get tcm node, err %d\n", ret); > + return ret; > + } > + > + for (i = 0; i < cluster->core_count; i++) { > + r5_core = cluster->r5_cores[i]; > + > + ret = zynqmp_r5_get_mem_region_node(r5_core); > + if (ret) > + dev_warn(dev, "memory-region prop failed %d\n", ret); > + > + /* Initialize r5 cores with power-domains parsed from dts */ > + ret = of_property_read_u32_index(r5_core->np, "power-domains", > + 1, &r5_core->pm_domain_id); > + if (ret) { > + dev_err(dev, "failed to get power-domains property\n"); > + return ret; > + } > + > + ret = zynqmp_r5_set_mode(r5_core, fw_reg_val, tcm_mode); > + if (ret) { > + dev_err(dev, "failed to set r5 cluster mode %d, err %d\n", > + cluster->mode, ret); > + return ret; > + } > + } > + > + return 0; > +} > + > +/* > + * zynqmp_r5_cluster_init() > + * Create and initialize zynqmp_r5_cluster type object > + * > + * @cluster: pointer to zynqmp_r5_cluster type object > + * > + * Return: 0 for success and error code for failure. > + */ > +static int zynqmp_r5_cluster_init(struct zynqmp_r5_cluster *cluster) > +{ > + enum zynqmp_r5_cluster_mode cluster_mode = LOCKSTEP_MODE; > + struct device *dev = cluster->dev; > + struct device_node *dev_node = dev_of_node(dev); > + struct platform_device *child_pdev; > + struct zynqmp_r5_core **r5_cores; > + enum rpu_oper_mode fw_reg_val; > + struct device **child_devs; > + struct device_node *child; > + enum rpu_tcm_comb tcm_mode; > + int core_count, ret, i; > + > + ret = of_property_read_u32(dev_node, "xlnx,cluster-mode", &cluster_mode); > + > + /* > + * on success returns 0, if not defined then returns -EINVAL, > + * In that case, default is LOCKSTEP mode. Other than that > + * returns relative error code < 0. > + */ > + if (ret != -EINVAL && ret != 0) { > + dev_err(dev, "Invalid xlnx,cluster-mode property\n"); > + return -EINVAL; Why not return 'ret' rather than masking the real error code? > + } > + > + /* > + * For now driver only supports split mode and lockstep mode. > + * fail driver probe if either of that is not set in dts. > + */ > + if (cluster_mode == LOCKSTEP_MODE) { > + tcm_mode = PM_RPU_TCM_COMB; > + fw_reg_val = PM_RPU_MODE_LOCKSTEP; > + } else if (cluster_mode == SPLIT_MODE) { > + tcm_mode = PM_RPU_TCM_SPLIT; > + fw_reg_val = PM_RPU_MODE_SPLIT; > + } else { > + dev_err(dev, "driver does not support cluster mode %d\n", cluster_mode); > + return -EINVAL; > + } > + > + /* > + * Number of cores is decided by number of child nodes of > + * r5f subsystem node in dts. If Split mode is used in dts > + * 2 child nodes are expected. > + * In lockstep mode if two child nodes are available, > + * only use first child node and consider it as core0 > + * and ignore core1 dt node. > + */ > + core_count = of_get_available_child_count(dev_node); > + if (core_count <= 0) { Function of_get_available_child_count() does not return a negative value. More comments to come tomorrow or later this week. Thanks, Mathieu > + dev_err(dev, "Invalid number of r5 cores %d", core_count); > + return -EINVAL; > + } else if (cluster_mode == SPLIT_MODE && core_count != 2) { > + dev_err(dev, "Invalid number of r5 cores for split mode\n"); > + return -EINVAL; > + } else if (cluster_mode == LOCKSTEP_MODE && core_count == 2) { > + dev_warn(dev, "Only r5 core0 will be used\n"); > + core_count = 1; > + } > + > + child_devs = kcalloc(core_count, sizeof(struct device *), GFP_KERNEL); > + if (!child_devs) > + return -ENOMEM; > + > + r5_cores = kcalloc(core_count, > + sizeof(struct zynqmp_r5_core *), GFP_KERNEL); > + if (!r5_cores) { > + kfree(child_devs); > + return -ENOMEM; > + } > + > + i = 0; > + for_each_available_child_of_node(dev_node, child) { > + child_pdev = of_find_device_by_node(child); > + if (!child_pdev) { > + of_node_put(child); > + ret = -ENODEV; > + goto release_r5_cores; > + } > + > + child_devs[i] = &child_pdev->dev; > + > + /* create and add remoteproc instance of type struct rproc */ > + r5_cores[i] = zynqmp_r5_add_rproc_core(&child_pdev->dev); > + if (IS_ERR(r5_cores[i])) { > + of_node_put(child); > + ret = PTR_ERR(r5_cores[i]); > + r5_cores[i] = NULL; > + goto release_r5_cores; > + } > + > + /* > + * If two child nodes are available in dts in lockstep mode, > + * then ignore second child node. > + */ > + if (cluster_mode == LOCKSTEP_MODE) { > + of_node_put(child); > + break; > + } > + > + i++; > + } > + > + cluster->mode = cluster_mode; > + cluster->core_count = core_count; > + cluster->r5_cores = r5_cores; > + > + ret = zynqmp_r5_core_init(cluster, fw_reg_val, tcm_mode); > + if (ret < 0) { > + dev_err(dev, "failed to init r5 core err %d\n", ret); > + cluster->core_count = 0; > + cluster->r5_cores = NULL; > + > + /* > + * at this point rproc resources for each core are allocated. > + * adjust index to free resources in reverse order > + */ > + i = core_count - 1; > + goto release_r5_cores; > + } > + > + kfree(child_devs); > + return 0; > + > +release_r5_cores: > + while (i >= 0) { > + put_device(child_devs[i]); > + if (r5_cores[i]) { > + rproc_del(r5_cores[i]->rproc); > + rproc_free(r5_cores[i]->rproc); > + } > + i--; > + } > + kfree(r5_cores); > + kfree(child_devs); > + return ret; > +} > + > +static void zynqmp_r5_cluster_exit(void *data) > +{ > + struct platform_device *pdev = (struct platform_device *)data; > + struct zynqmp_r5_cluster *cluster; > + struct zynqmp_r5_core *r5_core; > + int i; > + > + cluster = (struct zynqmp_r5_cluster *)platform_get_drvdata(pdev); > + if (!cluster) > + return; > + > + for (i = 0; i < cluster->core_count; i++) { > + r5_core = cluster->r5_cores[i]; > + put_device(r5_core->dev); > + rproc_del(r5_core->rproc); > + rproc_free(r5_core->rproc); > + } > + > + kfree(cluster->r5_cores); > + kfree(cluster); > + platform_set_drvdata(pdev, NULL); > +} > + > +/* > + * zynqmp_r5_remoteproc_probe() > + * parse device-tree, initialize hardware and allocate required resources > + * and remoteproc ops > + * > + * @pdev: domain platform device for R5 cluster > + * > + * Return: 0 for success and < 0 for failure. > + */ > +static int zynqmp_r5_remoteproc_probe(struct platform_device *pdev) > +{ > + struct zynqmp_r5_cluster *cluster; > + struct device *dev = &pdev->dev; > + int ret; > + > + cluster = kzalloc(sizeof(*cluster), GFP_KERNEL); > + if (!cluster) > + return -ENOMEM; > + > + cluster->dev = dev; > + > + ret = devm_of_platform_populate(dev); > + if (ret) { > + dev_err_probe(dev, ret, "failed to populate platform dev\n"); > + kfree(cluster); > + return ret; > + } > + > + /* wire in so each core can be cleaned up at driver remove */ > + platform_set_drvdata(pdev, cluster); > + > + ret = zynqmp_r5_cluster_init(cluster); > + if (ret) { > + kfree(cluster); > + platform_set_drvdata(pdev, NULL); > + dev_err_probe(dev, ret, "Invalid r5f subsystem device tree\n"); > + return ret; > + } > + > + ret = devm_add_action_or_reset(dev, zynqmp_r5_cluster_exit, pdev); > + if (ret) > + return ret; > + > + return 0; > +} > + > +/* Match table for OF platform binding */ > +static const struct of_device_id zynqmp_r5_remoteproc_match[] = { > + { .compatible = "xlnx,zynqmp-r5fss", }, > + { /* end of list */ }, > +}; > +MODULE_DEVICE_TABLE(of, zynqmp_r5_remoteproc_match); > + > +static struct platform_driver zynqmp_r5_remoteproc_driver = { > + .probe = zynqmp_r5_remoteproc_probe, > + .driver = { > + .name = "zynqmp_r5_remoteproc", > + .of_match_table = zynqmp_r5_remoteproc_match, > + }, > +}; > +module_platform_driver(zynqmp_r5_remoteproc_driver); > + > +MODULE_DESCRIPTION("Xilinx R5F remote processor driver"); > +MODULE_AUTHOR("Xilinx Inc."); > +MODULE_LICENSE("GPL"); > -- > 2.25.1 >