mdio bus frequency can be configured at boottime by a property in DT now, so add a description to it. Signed-off-by: Andy Chiu <andy.chiu@xxxxxxxxxx> Reviewed-by: Greentime Hu <greentime.hu@xxxxxxxxxx> --- Documentation/devicetree/bindings/net/xilinx_axienet.txt | 2 ++ 1 file changed, 2 insertions(+) diff --git a/Documentation/devicetree/bindings/net/xilinx_axienet.txt b/Documentation/devicetree/bindings/net/xilinx_axienet.txt index 1aa4c6006cd0..80e505a2fda1 100644 --- a/Documentation/devicetree/bindings/net/xilinx_axienet.txt +++ b/Documentation/devicetree/bindings/net/xilinx_axienet.txt @@ -68,6 +68,8 @@ Optional properties: - mdio : Child node for MDIO bus. Must be defined if PHY access is required through the core's MDIO interface (i.e. always, unless the PHY is accessed through a different bus). + Non-standard MDIO bus frequency is supported via + "clock-frequency", see mdio.yaml. - pcs-handle: Phandle to the internal PCS/PMA PHY in SGMII or 1000Base-X modes, where "pcs-handle" should be used to point -- 2.36.0
