On 30.10.2022 20:42, Adam Skladowski wrote:
> Add a base DT for MSM8976 SoC.
>
> Signed-off-by: Adam Skladowski <a39.skl@xxxxxxxxx>
> ---
> arch/arm64/boot/dts/qcom/msm8976.dtsi | 1357 +++++++++++++++++++++++++
Not sure if code that's not compiled anywhere will be accepted.
> 1 file changed, 1357 insertions(+)
> create mode 100644 arch/arm64/boot/dts/qcom/msm8976.dtsi
>
> diff --git a/arch/arm64/boot/dts/qcom/msm8976.dtsi b/arch/arm64/boot/dts/qcom/msm8976.dtsi
> new file mode 100644
> index 0000000000000..461593eb04635
> --- /dev/null
> +++ b/arch/arm64/boot/dts/qcom/msm8976.dtsi
> @@ -0,0 +1,1357 @@
> +// SPDX-License-Identifier: BSD-3-Clause
> +/* Copyright (c) 2022, The Linux Foundation. All rights reserved. */
> +
> +#include <dt-bindings/clock/qcom,gcc-msm8976.h>
> +#include <dt-bindings/gpio/gpio.h>
> +#include <dt-bindings/interrupt-controller/arm-gic.h>
> +#include <dt-bindings/power/qcom-rpmpd.h>
> +#include <dt-bindings/thermal/thermal.h>
> +
> +/ {
> + interrupt-parent = <&intc>;
> +
> + #address-cells = <2>;
> + #size-cells = <2>;
> +
> + chosen { };
> +
> + clocks {
> + sleep_clk: sleep-clk {
> + compatible = "fixed-clock";
> + #clock-cells = <0>;
> + clock-frequency = <32768>;
> + };
> +
> + xo_board: xo-board {
> + compatible = "fixed-clock";
> + #clock-cells = <0>;
> + clock-frequency = <19200000>;
Let me directly quote Krzysztof:
"""
This a DTSI for the SoC and these clocks do not exist on the SoC. So as
usual - either they are part of board, or at least you move there the
frequency to indicate that, or put them in DTSI and include from the board.
See entire thread:
https://lore.kernel.org/linux-arm-msm/9fbe1bf5-a84d-c56b-1c0e-6848ee3d30fe@xxxxxxxxxx/
"""
> + clock-output-names = "xo";
> + };
> + };
> +
> + cpus {
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + CPU0: cpu@0 {
> + device_type = "cpu";
> + compatible = "arm,cortex-a53";
> + reg = <0x0>;
> + enable-method = "psci";
> + capacity-dmips-mhz = <1024>;
> + next-level-cache = <&L2_0>;
> + #cooling-cells = <2>;
> +
> + l1-icache {
> + compatible = "cache";
> + };
> + l1-dcache {
> + compatible = "cache";
> + };
> + };
> +
> + CPU1: cpu@1 {
> + device_type = "cpu";
> + compatible = "arm,cortex-a53";
> + reg = <0x1>;
> + enable-method = "psci";
> + capacity-dmips-mhz = <1024>;
> + next-level-cache = <&L2_0>;
> + #cooling-cells = <2>;
> +
> + l1-icache {
> + compatible = "cache";
> + };
> + l1-dcache {
> + compatible = "cache";
> + };
> + };
> +
> + CPU2: cpu@2 {
> + device_type = "cpu";
> + compatible = "arm,cortex-a53";
> + reg = <0x2>;
> + enable-method = "psci";
> + capacity-dmips-mhz = <1024>;
> + next-level-cache = <&L2_0>;
> + #cooling-cells = <2>;
> +
> + l1-icache {
> + compatible = "cache";
> + };
> + l1-dcache {
> + compatible = "cache";
> + };
> + };
> +
> + CPU3: cpu@3 {
> + device_type = "cpu";
> + compatible = "arm,cortex-a53";
> + reg = <0x3>;
> + enable-method = "psci";
> + capacity-dmips-mhz = <1024>;
> + next-level-cache = <&L2_0>;
> + #cooling-cells = <2>;
> +
> + l1-icache {
> + compatible = "cache";
> + };
> + l1-dcache {
> + compatible = "cache";
> + };
> + };
> +
> + CPU4: cpu@100 {
> + device_type = "cpu";
> + compatible = "arm,cortex-a72";
> + reg = <0x100>;
> + enable-method = "psci";
> + capacity-dmips-mhz = <1830>;
> + next-level-cache = <&L2_1>;
> + #cooling-cells = <2>;
> +
> + l1-icache {
> + compatible = "cache";
> + };
> + l1-dcache {
> + compatible = "cache";
> + };
> + };
> +
> + CPU5: cpu@101 {
> + device_type = "cpu";
> + compatible = "arm,cortex-a72";
> + reg = <0x101>;
> + enable-method = "psci";
> + capacity-dmips-mhz = <1830>;
> + next-level-cache = <&L2_1>;
> + #cooling-cells = <2>;
> +
> + l1-icache {
> + compatible = "cache";
> + };
> + l1-dcache {
> + compatible = "cache";
> + };
> + };
> +
> + CPU6: cpu@102 {
> + device_type = "cpu";
> + compatible = "arm,cortex-a72";
> + reg = <0x102>;
> + enable-method = "psci";
> + capacity-dmips-mhz = <1830>;
> + next-level-cache = <&L2_1>;
> + #cooling-cells = <2>;
> +
> + l1-icache {
> + compatible = "cache";
> + };
> + l1-dcache {
> + compatible = "cache";
> + };
> + };
> +
> + CPU7: cpu@103 {
> + device_type = "cpu";
> + compatible = "arm,cortex-a72";
> + reg = <0x103>;
> + enable-method = "psci";
> + capacity-dmips-mhz = <1830>;
> + next-level-cache = <&L2_1>;
> + #cooling-cells = <2>;
> +
> + l1-icache {
> + compatible = "cache";
> + };
> + l1-dcache {
> + compatible = "cache";
> + };
> + };
> +
> + cpu-map {
> + cluster0 {
> + core0 {
> + cpu = <&CPU0>;
> + };
> + core1 {
> + cpu = <&CPU1>;
> + };
> + core2 {
> + cpu = <&CPU2>;
> + };
> + core3 {
> + cpu = <&CPU3>;
> + };
> + };
> +
> + cluster1 {
> + core0 {
> + cpu = <&CPU4>;
> + };
> + core1 {
> + cpu = <&CPU5>;
> + };
> + core2 {
> + cpu = <&CPU6>;
> + };
> + core3 {
> + cpu = <&CPU7>;
> + };
> + };
> + };
> +
> + L2_0: l2-cache_0 {
> + compatible = "cache";
> + cache-level = <2>;
> + };
> +
> + L2_1: l2-cache_1 {
> + compatible = "cache";
> + cache-level = <2>;
> + };
> + };
> +
> + firmware {
> + scm: scm {
> + compatible = "qcom,scm-msm8976", "qcom,scm";
> + clocks = <&gcc GCC_CRYPTO_CLK>,
> + <&gcc GCC_CRYPTO_AXI_CLK>,
> + <&gcc GCC_CRYPTO_AHB_CLK>;
> + clock-names = "core", "bus", "iface";
> + #reset-cells = <1>;
> + };
> + };
> +
> + memory {
memory@address, you can check what bootloader passes here in sysfs
> + device_type = "memory";
> + /* We expect the bootloader to fill in the reg */
> + reg = <0 0 0 0>;
and also add the address here.
> + };
> +
> + pmu {
> + compatible = "arm,cortex-a53-pmu";
> + interrupts = <GIC_PPI 7 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_HIGH)>;
> + };
> +
> + psci {
> + compatible = "arm,psci-1.0";
> + method = "smc";
> + };
> +
> + reserved-memory {
> + #address-cells = <2>;
> + #size-cells = <2>;
> + ranges;
> +
> + cont_splash_mem: memory@83000000 {
> + reg = <0x0 0x83000000 0x0 0x2800000>;
> + };
If it's not used for simplefb and not used as a carveout in drm/msm
(one can do that instead of dynamic allocation), it just takes up memory.
> +
> + ext_region: memory@85b00000 {
> + reg = <0x0 0x85b00000 0x0 0x500000>;
> + no-map;
> + };
> +
> + msm_imem: memory@86000000 {
compatible = "qcom,msm8976-imem", "syscon", "simple-mfd";
rename to sram@86..
+ move to mmio
you can check qcs404 for reference
> + reg = <0x0 0x86000000 0x0 0x300000>;
> + no-map;
> + };
> +
> + smem_mem: memory@86300000 {
> + compatible = "qcom,smem";
> + reg = <0x0 0x86300000 0x0 0x100000>;
> + qcom,rpm-msg-ram = <&rpm_msg_ram>;
> + hwlocks = <&tcsr_mutex 3>;
> + no-map;
> + };
> +
> + memory@86400000 {
> + reg = <0x0 0x86400000 0x0 0x800000>;
> + no-map;
> + };
> +
> + mpss_mem: memory@86c00000 {
> + reg = <0x0 0x86c00000 0x0 0x5600000>;
> + no-map;
> + };
> +
> + adsp_fw_mem: memory@8c200000 {
> + reg = <0x0 0x8c200000 0x0 0x1000000>;
> + no-map;
> + };
> +
> + wcnss_fw_mem: memory@8d200000 {
> + reg = <0x0 0x8d200000 0x0 0x2600000>;
> + no-map;
> + };
> +
> + venus_mem: memory@8f800000 {
> + reg = <0x0 0x8f800000 0x0 0x500000>;
> + no-map;
> + };
> +
> + memory@d5700000 {
> + compatible = "qcom,rmtfs-mem";
> + reg = <0x0 0xd5700000 0x0 0x200000>;
> + no-map;
> +
> + qcom,client-id = <1>;
> + };
> +
> + mba_mem: mba_mem@d5a00000 {
> + reg = <0x0 0xd5a00000 0x0 0x100000>;
> + no-map;
> + };
> + };
> +
> + smd {
> + compatible = "qcom,smd";
> +
> + rpm {
> + interrupts = <GIC_SPI 168 IRQ_TYPE_EDGE_RISING>;
> + qcom,ipc = <&apcs 8 0>;
> + qcom,smd-edge = <15>;
> +
> + rpm_requests: rpm-requests {
> + compatible = "qcom,rpm-msm8976";
> + qcom,smd-channels = "rpm_requests";
> +
> + rpmcc: rpmcc {
> + compatible = "qcom,rpmcc-msm8976", "qcom,rpmcc";
> + clocks = <&xo_board>;
> + clock-names = "xo";
> + #clock-cells = <1>;
> + };
> +
> + rpmpd: power-controller {
> + compatible = "qcom,msm8976-rpmpd";
> + #power-domain-cells = <1>;
> + operating-points-v2 = <&rpmpd_opp_table>;
> +
> + clocks = <&xo_board>;
> + clock-names = "ref";
> +
> + rpmpd_opp_table: opp-table {
> + compatible = "operating-points-v2";
> +
> + rpmpd_opp_ret: opp1 {
> + opp-level = <RPM_SMD_LEVEL_RETENTION>;
> + };
> +
> + rpmpd_opp_ret_plus: opp2 {
> + opp-level = <RPM_SMD_LEVEL_RETENTION_PLUS>;
> + };
> +
> + rpmpd_opp_min_svs: opp3 {
> + opp-level = <RPM_SMD_LEVEL_MIN_SVS>;
> + };
> +
> + rpmpd_opp_low_svs: opp4 {
> + opp-level = <RPM_SMD_LEVEL_LOW_SVS>;
> + };
> +
> + rpmpd_opp_svs: opp5 {
> + opp-level = <RPM_SMD_LEVEL_SVS>;
> + };
> +
> + rpmpd_opp_svs_plus: opp6 {
> + opp-level = <RPM_SMD_LEVEL_SVS_PLUS>;
> + };
> +
> + rpmpd_opp_nom: opp7 {
> + opp-level = <RPM_SMD_LEVEL_NOM>;
> + };
> +
> + rpmpd_opp_nom_plus: opp8 {
> + opp-level = <RPM_SMD_LEVEL_NOM_PLUS>;
> + };
> +
> + rpmpd_opp_turbo: opp9 {
> + opp-level = <RPM_SMD_LEVEL_TURBO>;
> + };
> + };
> + };
> + };
> + };
> + };
> +
> + smsm {
> + compatible = "qcom,smsm";
> +
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + qcom,ipc-1 = <&apcs 8 13>;
> + qcom,ipc-3 = <&apcs 8 19>;
> +
> + apps_smsm: apps@0 {
> + reg = <0>;
> +
> + #qcom,smem-state-cells = <1>;
> + };
> +
> + hexagon_smsm: hexagon@1 {
> + reg = <1>;
> + interrupts = <GIC_SPI 290 IRQ_TYPE_EDGE_RISING>;
> +
> + interrupt-controller;
> + #interrupt-cells = <2>;
> + };
> +
> + wcnss_smsm: wcnss@6 {
> + reg = <6>;
> + interrupts = <GIC_SPI 144 IRQ_TYPE_EDGE_RISING>;
> +
> + interrupt-controller;
> + #interrupt-cells = <2>;
> + };
> + };
> +
> + smp2p-adsp {
> + compatible = "qcom,smp2p";
> + qcom,smem = <443>, <429>;
> +
> + interrupts = <GIC_SPI 291 IRQ_TYPE_EDGE_RISING>;
> +
> + mboxes = <&apcs 10>;
> +
> + qcom,local-pid = <0>;
> + qcom,remote-pid = <2>;
> +
> + smp2p_adsp_out: master-kernel {
> + qcom,entry-name = "master-kernel";
> + #qcom,smem-state-cells = <1>;
> + };
> +
> + smp2p_adsp_in: slave-kernel {
> + qcom,entry-name = "slave-kernel";
> +
> + interrupt-controller;
> + #interrupt-cells = <2>;
> + };
> + };
> +
> + smp2p-modem {
> + compatible = "qcom,smp2p";
> + qcom,smem = <435>, <428>;
> +
> + interrupts = <GIC_SPI 27 IRQ_TYPE_EDGE_RISING>;
> +
> + qcom,ipc = <&apcs 8 14>;
> +
> + qcom,local-pid = <0>;
> + qcom,remote-pid = <1>;
> +
> + modem_smp2p_out: master-kernel {
> + qcom,entry-name = "master-kernel";
> +
> + #qcom,smem-state-cells = <1>;
> + };
> +
> + modem_smp2p_in: slave-kernel {
> + qcom,entry-name = "slave-kernel";
> +
> + interrupt-controller;
> + #interrupt-cells = <2>;
> + };
> + };
> +
> + smp2p-wcnss {
> + compatible = "qcom,smp2p";
> + qcom,smem = <451>, <431>;
> +
> + interrupts = <GIC_SPI 143 IRQ_TYPE_EDGE_RISING>;
> +
> + qcom,ipc = <&apcs 8 18>;
> +
> + qcom,local-pid = <0>;
> + qcom,remote-pid = <4>;
> +
> + wcnss_smp2p_out: master-kernel {
> + qcom,entry-name = "master-kernel";
> +
> + #qcom,smem-state-cells = <1>;
> + };
> +
> + wcnss_smp2p_in: slave-kernel {
> + qcom,entry-name = "slave-kernel";
> +
> + interrupt-controller;
> + #interrupt-cells = <2>;
> + };
> + };
> +
> + soc: soc@0 {
> + #address-cells = <1>;
> + #size-cells = <1>;
> + ranges = <0 0 0 0xffffffff>;
> + compatible = "simple-bus";
> +
> + rpm_msg_ram: sram@60000 {
> + compatible = "qcom,rpm-msg-ram";
> + reg = <0x60000 0x8000>;
Pad addr to 8 hex digits, please.
> + };
> +
> + rng@22000 {
This node should be above rpm_msg_ram address-wise.
> + compatible = "qcom,prng";
> + reg = <0x00022000 0x1000>;
> + clocks = <&gcc GCC_PRNG_AHB_CLK>;
> + clock-names = "core";
> + };
> +
> + qfprom@a4000 {
> + compatible = "qcom,qfprom";
> + reg = <0x000a4000 0x1000>;
> + #address-cells = <1>;
> + #size-cells = <1>;
> +
> + tsens_caldata: caldata@218 {
> + reg = <0x218 0x18>;
> + };
> + };
> +
> + tsens0: thermal-sensor@4a9000 {
> + compatible = "qcom,msm8976-tsens", "qcom,tsens-v1";
> + reg = <0x4a9000 0x1000>, /* TM */
> + <0x4a8000 0x1000>; /* SROT */
> + #qcom,sensors = <11>;
> + interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>;
> + interrupt-names = "uplow";
> + nvmem-cells = <&tsens_caldata>;
> + nvmem-cell-names = "calib";
> + #thermal-sensor-cells = <1>;
> + };
> +
> + restart@4ab000 {
> + compatible = "qcom,pshold";
> + reg = <0x4ab000 0x4>;
> + };
> +
> + tlmm: pinctrl@1000000 {
> + compatible = "qcom,msm8976-pinctrl";
> + reg = <0x1000000 0x300000>;
> + interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
> + gpio-controller;
> + gpio-ranges = <&tlmm 0 0 158>;
> + #gpio-cells = <2>;
> + interrupt-controller;
> + #interrupt-cells = <2>;
> +
> + mdss_te_default: mdss-te-pins {
Subnodes are supposed to have a -pins suffix, parent nodes should end in -state.
> + pins = "gpio24";
> + function = "mdp_vsync";
> + drive-strength = <2>;
> + bias-pull-down;
> + };
> +
> + sdc1_clk_on: sdc1-clk-on-state {
> + pins = "sdc1_clk";
> + bias-disable;
> + drive-strength = <16>;
> + };
> +
> + sdc1_clk_off: sdc1-clk-off-state {
> + pins = "sdc1_clk";
> + bias-disable;
> + drive-strength = <2>;
> + };
> +
> + sdc1_cmd_on: sdc1-cmd-on-state {
> + pins = "sdc1_cmd";
> + bias-disable;
> + drive-strength = <10>;
> + };
> +
> + sdc1_cmd_off: sdc1-cmd-off-state {
> + pins = "sdc1_cmd";
> + bias-disable;
> + drive-strength = <2>;
> + };
> +
> + sdc1_data_on: sdc1-data-on-state {
> + pins = "sdc1_data";
> + bias-pull-up;
> + drive-strength = <10>;
> + };
> +
> + sdc1_data_off: sdc1-data-off-state {
> + pins = "sdc1_data";
> + bias-pull-up;
> + drive-strength = <2>;
> + };
> +
> + sdc1_rclk_on: sdc1-rclk-on-state {
> + pins = "sdc1_rclk";
> + bias-pull-down;
> + };
> +
> + sdc1_rclk_off: sdc1-rclk-off-state {
> + pins = "sdc1_rclk";
> + bias-pull-down;
> + };
> +
> + sdc2_clk_on: sdc2-clk-on-state {
> + pins = "sdc2_clk";
> + drive-strength = <16>;
> + bias-disable;
> + };
> +
> + sdc2_clk_off: sdc2-clk-off-state {
> + pins = "sdc2_clk";
> + bias-disable;
> + drive-strength = <2>;
> + };
> +
> + sdc2_cmd_on: sdc2-cmd-on-state {
> + pins = "sdc2_cmd";
> + bias-pull-up;
> + drive-strength = <10>;
> + };
> +
> + sdc2_cmd_off: sdc2-cmd-off-state {
> + pins = "sdc2_cmd";
> + bias-pull-up;
> + drive-strength = <2>;
> + };
> +
> + sdc2_data_on: sdc2-data-on-state {
> + pins = "sdc2_data";
> + bias-pull-up;
> + drive-strength = <10>;
> + };
> +
> + sdc2_data_off: sdc2-data-off-state {
> + pins = "sdc2_data";
> + bias-pull-up;
> + drive-strength = <2>;
> + };
> +
> + sdc2_cd_on: cd-on-state {
> + pins = "gpio100";
> + function = "gpio";
> + drive-strength = <2>;
> + bias-pull-up;
> + };
> +
> + sdc2_cd_off: cd-off-state {
> + pins = "gpio100";
> + function = "gpio";
> + drive-strength = <2>;
> + bias-disable;
> + };
> +
> + gpio_key_default: gpio-key-default-state {
> + pins = "gpio113";
> + function = "gpio";
> + drive-strength = <2>;
> + bias-pull-up;
> + };
> +
> + i2c_1_default: i2c-1-default-state {
> + pins = "gpio2", "gpio3";
> + function = "blsp_i2c1";
> + drive-strength = <2>;
> + bias-disable;
> + };
> +
> + i2c_1_sleep: i2c-1-sleep-state {
> + pins = "gpio2", "gpio3";
> + function = "gpio";
> + drive-strength = <2>;
> + bias-disable;
> + };
> +
> + i2c_2_default: i2c-2-default-state {
> + pins = "gpio6", "gpio7";
> + function = "blsp_i2c2";
> + drive-strength = <2>;
> + bias-disable;
> + };
> +
> + i2c_2_sleep: i2c-2-sleep-state {
> + pins = "gpio6", "gpio7";
> + function = "gpio";
> + drive-strength = <2>;
> + bias-disable;
> + };
> +
> + i2c_3_default: i2c-3-default-state {
> + pins = "gpio10", "gpio11";
> + function = "blsp_i2c3";
> + drive-strength = <2>;
> + bias-disable;
> + };
> +
> + i2c_3_sleep: i2c-3-sleep-state {
> + pins = "gpio10", "gpio11";
> + function = "gpio";
> + drive-strength = <2>;
> + bias-disable;
> + };
> +
> + i2c_4_default: i2c-4-default-state {
> + pins = "gpio14", "gpio15";
> + function = "blsp_i2c4";
> + drive-strength = <2>;
> + bias-disable;
> + };
> +
> + i2c_4_sleep: i2c-4-sleep-state {
> + pins = "gpio14", "gpio15";
> + function = "gpio";
> + drive-strength = <2>;
> + bias-disable;
> + };
> +
> + i2c_5_default: i2c-5-default-state {
> + pins = "gpio136", "gpio137";
> + function = "blsp_i2c5";
> + drive-strength = <2>;
> + bias-disable;
> + };
> +
> + i2c_5_sleep: i2c-5-sleep-state {
> + pins = "gpio136", "gpio137";
> + function = "gpio";
> + drive-strength = <2>;
> + bias-disable;
> + };
> +
> + i2c_6_default: i2c-6-default-state {
> + pins = "gpio22", "gpio23";
> + function = "blsp_i2c6";
> + drive-strength = <2>;
> + bias-disable;
> + };
> +
> + i2c_6_sleep: i2c-6-sleep-state {
> + pins = "gpio22", "gpio23";
> + function = "gpio";
> + drive-strength = <2>;
> + bias-disable;
> + };
> +
> + i2c_7_default: i2c-7-default-state {
> + pins = "gpio110", "gpio111";
> + function = "blsp_i2c7";
> + drive-strength = <2>;
> + bias-disable;
> + };
> +
> + i2c_7_sleep: i2c-7-sleep-state {
> + pins = "gpio110", "gpio111";
> + function = "gpio";
> + drive-strength = <2>;
> + bias-disable;
> + };
> +
> + i2c_8_default: i2c-8-default-state {
> + pins = "gpio18", "gpio19";
> + function = "blsp_i2c8";
> + drive-strength = <2>;
> + bias-disable;
> + };
> +
> + i2c_8_sleep: i2c-8-sleep-state {
> + pins = "gpio18", "gpio19";
> + function = "gpio";
> + drive-strength = <2>;
> + bias-disable;
> + };
> + };
> +
> + gcc: clock-controller@1800000 {
> + compatible = "qcom,gcc-msm8976-v1.1";
> + reg = <0x1800000 0x80000>;
Please pad addr to 8 hex digits.
> + #clock-cells = <1>;
> + #reset-cells = <1>;
> + #power-domain-cells = <1>;
> + clocks = <&xo_board>,
> + <&xo_board>,
Any reason SMD XO doesn't fit here?
> + <&dsi0_phy 1>,
> + <&dsi0_phy 0>,
> + <&dsi1_phy 1>,
> + <&dsi1_phy 0>;
> + clock-names = "xo",
> + "xo_a",
> + "dsi0pll",
> + "dsi0pllbyte",
> + "dsi1pll",
> + "dsi1pllbyte";
> + };
> +
> + tcsr_mutex: hwlock@1905000 {
> + compatible = "qcom,tcsr-mutex";
> + reg = <0x1905000 0x20000>;
Please pad addr to 8 hex digits.
> + #hwlock-cells = <1>;
> + };
> +
> + tcsr: syscon@1937000 {
> + compatible = "syscon";
> + reg = <0x1937000 0x30000>;
Please pad addr to 8 hex digits.
> + };
> +
> + mdss: mdss@1a00000 {
> + compatible = "qcom,mdss";
> +
> + reg = <0x1a00000 0x1000>,
> + <0x1ab0000 0x1040>;
Please pad addr to 8 hex digits here and in all subnodes.
> + reg-names = "mdss_phys",
> + "vbif_phys";
> +
> + power-domains = <&gcc MDSS_GDSC>;
> + interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
> +
> + interrupt-controller;
> + #interrupt-cells = <1>;
> +
> + clocks = <&gcc GCC_MDSS_AHB_CLK>,
> + <&gcc GCC_MDSS_AXI_CLK>,
> + <&gcc GCC_MDSS_VSYNC_CLK>,
> + <&gcc GCC_MDSS_MDP_CLK>;
> + clock-names = "iface",
> + "bus",
> + "vsync",
> + "core";
> +
> + #address-cells = <1>;
> + #size-cells = <1>;
> + ranges;
> +
> + status = "disabled";
> +
> + mdp: mdp@1a01000 {
> + compatible = "qcom,mdp5";
> + reg = <0x1a01000 0x89000>;
> + reg-names = "mdp_phys";
> +
> + interrupt-parent = <&mdss>;
> + interrupts = <0>;
> +
> + power-domains = <&gcc MDSS_GDSC>;
> +
> + clocks = <&gcc GCC_MDSS_AHB_CLK>,
> + <&gcc GCC_MDSS_AXI_CLK>,
> + <&gcc GCC_MDSS_MDP_CLK>,
> + <&gcc GCC_MDSS_VSYNC_CLK>,
> + <&gcc GCC_MDP_TBU_CLK>,
> + <&gcc GCC_MDP_RT_TBU_CLK>;
> + clock-names = "iface",
> + "bus",
> + "core",
> + "vsync",
> + "tbu",
> + "tbu_rt";
> + iommus = <&apps_iommu 0x17>;
> +
> + ports {
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + port@0 {
> + reg = <0>;
> + mdp5_intf1_out: endpoint {
> + remote-endpoint = <&dsi0_in>;
> + };
> + };
> +
> + port@1 {
> + reg = <1>;
> + mdp5_intf2_out: endpoint {
> + remote-endpoint = <&dsi1_in>;
> + };
> + };
> + };
> + };
> +
> + dsi0: dsi@1a94000 {
> + compatible = "qcom,mdss-dsi-ctrl";
> + reg = <0x1a94000 0x2d4>;
> + reg-names = "dsi_ctrl";
> +
> + interrupt-parent = <&mdss>;
> + interrupts = <4>;
> +
> + assigned-clocks = <&gcc GCC_MDSS_BYTE0_CLK_SRC>,
> + <&gcc GCC_MDSS_PCLK0_CLK_SRC>;
> + assigned-clock-parents = <&dsi0_phy 0>,
> + <&dsi0_phy 1>;
> +
> + clocks = <&gcc GCC_MDSS_MDP_CLK>,
> + <&gcc GCC_MDSS_AHB_CLK>,
> + <&gcc GCC_MDSS_AXI_CLK>,
> + <&gcc GCC_MDSS_BYTE0_CLK>,
> + <&gcc GCC_MDSS_PCLK0_CLK>,
> + <&gcc GCC_MDSS_ESC0_CLK>;
> + clock-names = "mdp_core",
> + "iface",
> + "bus",
> + "byte",
> + "pixel",
> + "core";
> +
> + phys = <&dsi0_phy>;
> +
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + status = "disabled";
> +
> + ports {
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + port@0 {
> + reg = <0>;
> + dsi0_in: endpoint {
> + remote-endpoint = <&mdp5_intf1_out>;
> + };
> + };
> +
> + port@1 {
> + reg = <1>;
> + dsi0_out: endpoint {
> + };
> + };
> + };
> + };
> +
> + dsi0_phy: phy@1a94400 {
> + compatible = "qcom,dsi-phy-28nm-hpm-fam-b";
> + reg = <0x1a94400 0x20c>,
> + <0x1a94b80 0x2c>,
> + <0x1a94a00 0xd4>;
> + reg-names = "dsi_phy",
> + "dsi_phy_regulator",
> + "dsi_pll";
> +
> + #clock-cells = <1>;
> + #phy-cells = <0>;
> +
> + clocks = <&gcc GCC_MDSS_AHB_CLK>, <&xo_board>;
> + clock-names = "iface", "ref";
> +
> + status = "disabled";
> + };
> +
> + dsi1: dsi@1a96000 {
> + compatible = "qcom,mdss-dsi-ctrl";
> + reg = <0x1a96000 0x2d4>;
> + reg-names = "dsi_ctrl";
> +
> + interrupt-parent = <&mdss>;
> + interrupts = <5>;
> +
> + assigned-clocks = <&gcc GCC_MDSS_BYTE1_CLK_SRC>,
> + <&gcc GCC_MDSS_PCLK1_CLK_SRC>;
> + assigned-clock-parents = <&dsi1_phy 0>,
> + <&dsi1_phy 1>;
> +
> + clocks = <&gcc GCC_MDSS_MDP_CLK>,
> + <&gcc GCC_MDSS_AHB_CLK>,
> + <&gcc GCC_MDSS_AXI_CLK>,
> + <&gcc GCC_MDSS_BYTE1_CLK>,
> + <&gcc GCC_MDSS_PCLK1_CLK>,
> + <&gcc GCC_MDSS_ESC1_CLK>;
> + clock-names = "mdp_core",
> + "iface",
> + "bus",
> + "byte",
> + "pixel",
> + "core";
> +
> + phys = <&dsi1_phy>;
> +
> + status = "disabled";
> +
> + ports {
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + port@0 {
> + reg = <0>;
> + dsi1_in: endpoint {
> + remote-endpoint = <&mdp5_intf2_out>;
> + };
> + };
> +
> + port@1 {
> + reg = <1>;
> + dsi1_out: endpoint {
> + };
> + };
> + };
> + };
> +
> + dsi1_phy: phy@1a96400 {
> + compatible = "qcom,dsi-phy-28nm-hpm-fam-b";
> + reg = <0x1a96400 0x20c>,
> + <0x1a96b80 0x2c>,
> + <0x1a96a00 0xd4>;
> + reg-names = "dsi_phy",
> + "dsi_phy_regulator",
> + "dsi_pll";
> +
> + #clock-cells = <1>;
> + #phy-cells = <0>;
> +
> + clocks = <&gcc GCC_MDSS_AHB_CLK>, <&xo_board>;
> + clock-names = "iface", "ref";
> +
> + status = "disabled";
> + };
> + };
> +
> + apps_iommu: iommu@1e00000 {
> + compatible = "qcom,msm-iommu-v1";
> + ranges = <0 0x1e20000 0x20000>;
Please pad addr to 8 hex digits.
> +
> + clocks = <&gcc GCC_SMMU_CFG_CLK>,
> + <&gcc GCC_APSS_TCU_CLK>;
> + clock-names = "iface", "bus";
> +
> + qcom,iommu-secure-id = <17>;
> +
> + #address-cells = <1>;
> + #iommu-cells = <1>;
> + #size-cells = <1>;
> +
> + // mdp_0
Please use /* C-style */ comments.
> + iommu-ctx@17000 {
> + compatible = "qcom,msm-iommu-v1-ns";
> + reg = <0x17000 0x1000>;
Please pad addr to 8 hex digits. I see it happening a lot below,
so I'll stop repeating myself.
> + interrupts = <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>;
> + };
> +
> + };
> +
> + spmi_bus: spmi@200f000 {
> + compatible = "qcom,spmi-pmic-arb";
> + reg = <0x200f000 0x1000>,
> + <0x2400000 0x800000>,
> + <0x2c00000 0x800000>,
> + <0x3800000 0x200000>,
> + <0x200a000 0x2100>;
> + reg-names = "core", "chnls", "obsrvr", "intr", "cnfg";
> + interrupt-names = "periph_irq";
> + interrupts = <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>;
> + qcom,ee = <0>;
> + qcom,channel = <0>;
> + interrupt-controller;
> +
> + #interrupt-cells = <4>;
> + #address-cells = <2>;
> + #size-cells = <0>;
> + };
> +
> + sdhc_1: mmc@7824900 {
> + compatible = "qcom,sdhci-msm-v4";
> +
> + reg = <0x7824900 0x500>, <0x7824000 0x800>;
> + reg-names = "hc", "core";
> +
> + interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>;
> + interrupt-names = "hc_irq", "pwr_irq";
> +
> + clocks = <&gcc GCC_SDCC1_AHB_CLK>,
> + <&gcc GCC_SDCC1_APPS_CLK>,
> + <&xo_board>;
> + clock-names = "iface", "core", "xo";
> +
> + power-domains = <&rpmpd MSM8976_VDDCX>;
> + operating-points-v2 = <&sdhc1_opp_table>;
> +
> + pinctrl-names = "default", "sleep";
> + pinctrl-0 = <&sdc1_clk_on &sdc1_cmd_on &sdc1_data_on &sdc1_rclk_on>;
> + pinctrl-1 = <&sdc1_clk_off &sdc1_cmd_off &sdc1_data_off &sdc1_rclk_off>;
> +
> + mmc-hs400-1_8v;
> + mmc-hs200-1_8v;
> + mmc-ddr-1_8v;
> + bus-width = <8>;
> + non-removable;
> +
> + status = "disabled";
> +
> + sdhc1_opp_table: opp-table-sdhc1 {
> + compatible = "operating-points-v2";
> +
> + opp-100000000 {
> + opp-hz = /bits/ 64 <100000000>;
> + required-opps = <&rpmpd_opp_svs>;
> + };
> +
> + opp-186400000 {
> + opp-hz = /bits/ 64 <186400000>;
> + required-opps = <&rpmpd_opp_nom>;
> + };
> +
> + opp-372800000 {
> + opp-hz = /bits/ 64 <372800000>;
> + required-opps = <&rpmpd_opp_nom>;
> + };
> + };
> + };
> +
> + sdhc_2: mmc@7864900 {
> + compatible = "qcom,sdhci-msm-v4";
> +
> + reg = <0x7864900 0x500>, <0x7864000 0x800>;
> + reg-names = "hc", "core";
> +
> + interrupts = <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 221 IRQ_TYPE_LEVEL_HIGH>;
> + interrupt-names = "hc_irq", "pwr_irq";
> +
> + clocks = <&gcc GCC_SDCC2_AHB_CLK>,
> + <&gcc GCC_SDCC2_APPS_CLK>,
> + <&xo_board>;
> + clock-names = "iface", "core", "xo";
> +
> + power-domains = <&rpmpd MSM8976_VDDCX>;
> + operating-points-v2 = <&sdhc2_opp_table>;
> +
> + pinctrl-names = "default", "sleep";
> + pinctrl-0 = <&sdc2_clk_on &sdc2_cmd_on &sdc2_data_on>;
> + pinctrl-1 = <&sdc2_clk_off &sdc2_cmd_off &sdc2_data_off>;
> +
> + bus-width = <4>;
> +
> + status = "disabled";
> +
> + sdhc2_opp_table: opp-table-sdhc2 {
> + compatible = "operating-points-v2";
> +
> + opp-50000000 {
> + opp-hz = /bits/ 64 <50000000>;
> + required-opps = <&rpmpd_opp_svs>;
> + };
> +
> + opp-200000000 {
> + opp-hz = /bits/ 64 <200000000>;
> + required-opps = <&rpmpd_opp_nom>;
> + };
> + };
> + };
> +
> + i2c_1: i2c@78b5000 {
> + compatible = "qcom,i2c-qup-v2.2.1";
> + reg = <0x78b5000 0x600>;
> + interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>;
> + clock-names = "core", "iface";
> + clocks = <&gcc GCC_BLSP1_QUP1_I2C_APPS_CLK>,
> + <&gcc GCC_BLSP1_AHB_CLK>;
> +
> + pinctrl-names = "default", "sleep";
> + pinctrl-0 = <&i2c_1_default>;
> + pinctrl-1 = <&i2c_1_sleep>;
> +
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + status = "disabled";
> + };
> +
> + i2c_2: i2c@78b6000 {
> + compatible = "qcom,i2c-qup-v2.2.1";
> + reg = <0x78b6000 0x600>;
> + interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
> + clock-names = "core", "iface";
> + clocks = <&gcc GCC_BLSP1_QUP2_I2C_APPS_CLK>,
> + <&gcc GCC_BLSP1_AHB_CLK>;
> +
> + pinctrl-names = "default", "sleep";
> + pinctrl-0 = <&i2c_2_default>;
> + pinctrl-1 = <&i2c_2_sleep>;
> +
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + status = "disabled";
> + };
> +
> + i2c_3: i2c@78b7000 {
> + compatible = "qcom,i2c-qup-v2.2.1";
> + reg = <0x78b7000 0x600>;
> + interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
> + clock-names = "core", "iface";
> + clocks = <&gcc GCC_BLSP1_QUP3_I2C_APPS_CLK>,
> + <&gcc GCC_BLSP1_AHB_CLK>;
> + pinctrl-names = "default", "sleep";
> + pinctrl-0 = <&i2c_3_default>;
> + pinctrl-1 = <&i2c_3_sleep>;
> +
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + status = "disabled";
> + };
> +
> + i2c_4: i2c@78b8000 {
> + compatible = "qcom,i2c-qup-v2.2.1";
> + reg = <0x78b8000 0x600>;
> + interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
> + clock-names = "core", "iface";
> + clocks = <&gcc GCC_BLSP1_QUP4_I2C_APPS_CLK>,
> + <&gcc GCC_BLSP1_AHB_CLK>;
> + pinctrl-names = "default", "sleep";
> + pinctrl-0 = <&i2c_4_default>;
> + pinctrl-1 = <&i2c_4_sleep>;
> +
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + status = "disabled";
> + };
> +
> + i2c_5: i2c@7af5000 {
> + compatible = "qcom,i2c-qup-v2.2.1";
> + reg = <0x7af5000 0x600>;
> + interrupts = <GIC_SPI 299 IRQ_TYPE_LEVEL_HIGH>;
> + clock-names = "core", "iface";
> + clocks = <&gcc GCC_BLSP2_QUP1_I2C_APPS_CLK>,
> + <&gcc GCC_BLSP2_AHB_CLK>;
> + pinctrl-names = "default", "sleep";
> + pinctrl-0 = <&i2c_5_default>;
> + pinctrl-1 = <&i2c_5_sleep>;
> +
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + status = "disabled";
> + };
> +
> + i2c_6: i2c@7af6000 {
> + compatible = "qcom,i2c-qup-v2.2.1";
> + reg = <0x7af6000 0x600>;
> + interrupts = <GIC_SPI 300 IRQ_TYPE_LEVEL_HIGH>;
> + clock-names = "core", "iface";
> + clocks = <&gcc GCC_BLSP2_QUP2_I2C_APPS_CLK>,
> + <&gcc GCC_BLSP2_AHB_CLK>;
> + pinctrl-names = "default", "sleep";
> + pinctrl-0 = <&i2c_6_default>;
> + pinctrl-1 = <&i2c_6_sleep>;
> +
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + status = "disabled";
> + };
> +
> + i2c_7: i2c@7af7000 {
> + compatible = "qcom,i2c-qup-v2.2.1";
> + reg = <0x7af7000 0x600>;
> + interrupts = <GIC_SPI 301 IRQ_TYPE_LEVEL_HIGH>;
> + clock-names = "core", "iface";
> + clocks = <&gcc GCC_BLSP2_QUP3_I2C_APPS_CLK>,
> + <&gcc GCC_BLSP2_AHB_CLK>;
> + pinctrl-names = "default", "sleep";
> + pinctrl-0 = <&i2c_7_default>;
> + pinctrl-1 = <&i2c_7_sleep>;
> +
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + status = "disabled";
> + };
> +
> + i2c_8: i2c@7af8000 {
> + compatible = "qcom,i2c-qup-v2.2.1";
> + reg = <0x7af8000 0x600>;
> + interrupts = <GIC_SPI 302 IRQ_TYPE_LEVEL_HIGH>;
> + clock-names = "core", "iface";
> + clocks = <&gcc GCC_BLSP2_QUP4_I2C_APPS_CLK>,
> + <&gcc GCC_BLSP2_AHB_CLK>;
> + pinctrl-names = "default", "sleep";
> + pinctrl-0 = <&i2c_8_default>;
> + pinctrl-1 = <&i2c_8_sleep>;
> +
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + status = "disabled";
> + };
> +
> + intc: interrupt-controller@b000000 {
> + compatible = "qcom,msm-qgic2";
> + interrupt-controller;
> + #interrupt-cells = <3>;
> + reg = <0x0b000000 0x1000>, <0x0b002000 0x1000>;
reg second, please
> + };
> +
> + apcs: mailbox@b011000 {
> + compatible = "qcom,msm8976-apcs-kpss-global", "syscon";
> + reg = <0xb011000 0x1000>;
> + #mbox-cells = <1>;
> + };
> +
> + timer@b120000 {
> + compatible = "arm,armv7-timer-mem";
> + reg = <0xb120000 0x1000>;
> + #address-cells = <0x01>;
> + #size-cells = <0x01>;
> + ranges;
> +
> + frame@b121000 {
> + frame-number = <0>;
> + interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
> + reg = <0xb121000 0x1000>,
> + <0xb122000 0x1000>;
reg first, please, here and below.
Konrad
> + };
> +
> + frame@b123000 {
> + frame-number = <1>;
> + interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
> + reg = <0xb123000 0x1000>;
> + status = "disabled";
> + };
> +
> + frame@b124000 {
> + frame-number = <2>;
> + interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
> + reg = <0xb124000 0x1000>;
> + status = "disabled";
> + };
> +
> + frame@b125000 {
> + frame-number = <3>;
> + interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
> + reg = <0xb125000 0x1000>;
> + status = "disabled";
> + };
> +
> + frame@b126000 {
> + frame-number = <4>;
> + interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
> + reg = <0xb126000 0x1000>;
> + status = "disabled";
> + };
> +
> + frame@b127000 {
> + frame-number = <5>;
> + interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
> + reg = <0xb127000 0x1000>;
> + status = "disabled";
> + };
> +
> + frame@b128000 {
> + frame-number = <6>;
> + interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
> + reg = <0xb128000 0x1000>;
> + status = "disabled";
> + };
> + };
> + };
> +
> + timer {
> + compatible = "arm,armv8-timer";
> + interrupts = <GIC_PPI 2 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
> + <GIC_PPI 3 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
> + <GIC_PPI 4 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
> + <GIC_PPI 1 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>;
> + };
> +};
