Re: [PATCH v1 1/3] dt-bindings: ingenic,aic: Remove unnecessary clocks from schema

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Fri, 28 Oct 2022 11:34:16 +0100, Aidan MacDonald wrote:
> The AIC needs only the first two clocks: "aic" is a gate that's used
> for gating the I2S controller when it's suspended, and "i2s" is the
> system clock, from which the bit and frame clocks are derived. Both
> clocks are therefore reasonably part of the AIC and should be passed
> to the OS.
> 
> But the "ext" and "pll half" clocks are a little more questionable.
> It appears these bindings were introduced when the schema was first
> converted to YAML, but weren't present in the original .txt binding.
> They are intended to be the possible parent clocks of "i2s".
> 
> The JZ4770 actually has three parents for its "i2s" clock, named
> "ext", "pll0", and "pll1" in the Linux driver. The JZ4780 has two
> parents but it doesn't have a "pll half" clock, instead it has an
> "i2s_pll" clock which behaves much differently to the actual
> "pll half" clock found on the JZ4740 & JZ4760. And there are other
> Ingenic SoCs that share the JZ4780's clock layout, eg, the X1000.
> 
> Therefore, the bindings aren't really adequate for the JZ4770 and
> a bit misleading for the JZ4780. Either we should fix the bindings,
> or remove them entirely.
> 
> This patch opts to remove the bindings. There is a good case to be
> made that "ext" and "pll half" don't belong here because they aren't
> directly used by the AIC. They are only used to set the parent of
> the "i2s" clock; they have no other effect on the AIC.
> 
> A good way to think of it is in terms of how the AIC constrains
> clocks. The AIC can only generate the bit & frame clocks from the
> system clock in certain ratios. Setting the sample rate effectively
> constrains the frame clock, which, because of the clock dividers
> controlled by the AIC, translates to constraints on the "i2s" clock.
> Nothing in the AIC imposes a direct constraint on the parents of
> the "i2s" clock, and the AIC does not need to enable or disable
> the parents directly, so in principle the AIC doesn't need to be
> aware of the parent clocks at all.
> 
> The choice of parent clock is still important, but the AIC doesn't
> have enough information to apply such constraints itself. The sound
> card does have that information because it knows how the AIC is
> connected to other components. We need to use other DT mechanisms
> to communicate those constraints at the sound card level, instead
> of passing the clocks through to the AIC, and inventing ad-hoc ways
> to plumb the constraints around behind the scenes.
> 
> Signed-off-by: Aidan MacDonald <aidanmacdonald.0x0@xxxxxxxxx>
> ---
>  .../devicetree/bindings/sound/ingenic,aic.yaml         | 10 ++--------
>  1 file changed, 2 insertions(+), 8 deletions(-)
> 

Acked-by: Rob Herring <robh@xxxxxxxxxx>



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux