[PATCH 08/10] arm64: dts: qcom: sm6350-lena: Enable QUP and GPI DMA

[Marijn Suijten <marijn.suijten@xxxxxxxxxxxxxx>]

Enable QUP and GPI DMA hardware to be able to add functioning I2C nodes
later.

Signed-off-by: Marijn Suijten <marijn.suijten@xxxxxxxxxxxxxx>
---
 .../dts/qcom/sm6350-sony-xperia-lena-pdx213.dts  | 16 ++++++++++++++++
 1 file changed, 16 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/sm6350-sony-xperia-lena-pdx213.dts b/arch/arm64/boot/dts/qcom/sm6350-sony-xperia-lena-pdx213.dts
index 5cb76026ef67..6eb1d4e5e60f 100644
--- a/arch/arm64/boot/dts/qcom/sm6350-sony-xperia-lena-pdx213.dts
+++ b/arch/arm64/boot/dts/qcom/sm6350-sony-xperia-lena-pdx213.dts
@@ -272,6 +272,14 @@ pm6150l_bob: bob {
 	};
 };
 
+&gpi_dma0 {
+	status = "okay";
+};
+
+&gpi_dma1 {
+	status = "okay";
+};
+
 &pm6350_gpios {
 	gpio_keys_state: gpio-keys-state {
 		key-volume-down-pins {
@@ -289,6 +297,14 @@ &pm6350_resin {
 	status = "okay";
 };
 
+&qupv3_id_0 {
+	status = "okay";
+};
+
+&qupv3_id_1 {
+	status = "okay";
+};
+
 &sdc2_off_state {
 	sd-cd-pins {
 		pins = "gpio94";
-- 
2.38.1