Enable the silergy,sy7636a and silergy,sy7636a-regulator on the reMarkable2. Signed-off-by: Alistair Francis <alistair@xxxxxxxxxxxxx> --- arch/arm/boot/dts/imx7d-remarkable2.dts | 63 +++++++++++++++++++++++++ 1 file changed, 63 insertions(+) diff --git a/arch/arm/boot/dts/imx7d-remarkable2.dts b/arch/arm/boot/dts/imx7d-remarkable2.dts index a2a91bfdd98e..58581295b9a0 100644 --- a/arch/arm/boot/dts/imx7d-remarkable2.dts +++ b/arch/arm/boot/dts/imx7d-remarkable2.dts @@ -22,6 +22,28 @@ memory@80000000 { reg = <0x80000000 0x40000000>; }; + thermal-zones { + epd-thermal { + thermal-sensors = <&epd_pmic>; + polling-delay-passive = <30000>; + polling-delay = <30000>; + + trips { + trip0 { + temperature = <49000>; + hysteresis = <2000>; + type = "passive"; + }; + + trip1 { + temperature = <50000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + }; + }; + reg_brcm: regulator-brcm { compatible = "regulator-fixed"; regulator-name = "brcm_reg"; @@ -84,6 +106,33 @@ wacom_digitizer: digitizer@9 { }; }; +&i2c4 { + clock-frequency = <100000>; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&pinctrl_i2c4>; + pinctrl-1 = <&pinctrl_i2c4>; + status = "okay"; + + sy7636a: pmic@62 { + compatible = "silergy,sy7636a"; + reg = <0x62>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_epdpmic>; + #address-cells = <1>; + #size-cells = <0>; + #thermal-sensor-cells = <0>; + epd-pwr-good-gpios = <&gpio6 21 GPIO_ACTIVE_HIGH>; + status = "okay"; + + regulators { + reg_epdpmic: vcom { + regulator-name = "vcom"; + regulator-boot-on; + }; + }; + }; +}; + &snvs_pwrkey { status = "okay"; }; @@ -177,6 +226,13 @@ MX7D_PAD_SAI1_TX_BCLK__GPIO6_IO13 0x14 >; }; + pinctrl_epdpmic: epdpmicgrp { + fsl,pins = < + MX7D_PAD_SAI2_RX_DATA__GPIO6_IO21 0x00000074 + MX7D_PAD_ENET1_RGMII_TXC__GPIO7_IO11 0x00000014 + >; + }; + pinctrl_i2c1: i2c1grp { fsl,pins = < MX7D_PAD_I2C1_SDA__I2C1_SDA 0x4000007f @@ -184,6 +240,13 @@ MX7D_PAD_I2C1_SCL__I2C1_SCL 0x4000007f >; }; + pinctrl_i2c4: i2c4grp { + fsl,pins = < + MX7D_PAD_I2C4_SDA__I2C4_SDA 0x4000007f + MX7D_PAD_I2C4_SCL__I2C4_SCL 0x4000007f + >; + }; + pinctrl_uart1: uart1grp { fsl,pins = < MX7D_PAD_UART1_TX_DATA__UART1_DCE_TX 0x79 -- 2.38.1