Re: [PATCH v2 net-next 2/6] dt-bindings: net: mediatek: add WED RX binding for MT7986 eth driver

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 23/10/2022 14:28, Lorenzo Bianconi wrote:
> Document the binding for the RX Wireless Ethernet Dispatch core on the
> MT7986 ethernet driver used to offload traffic received by WLAN NIC and
> forwarded to LAN/WAN one.
> 
> Signed-off-by: Lorenzo Bianconi <lorenzo@xxxxxxxxxx>

Please use scripts/get_maintainers.pl to get a list of necessary people
and lists to CC.  It might happen, that command when run on an older
kernel, gives you outdated entries.  Therefore please be sure you base
your patches on recent Linux kernel.

> ---
>  .../arm/mediatek/mediatek,mt7622-wed.yaml     | 91 +++++++++++++++++++
>  .../arm/mediatek/mediatek,mt7986-wo-boot.yaml | 46 ++++++++++
>  .../arm/mediatek/mediatek,mt7986-wo-ccif.yaml | 49 ++++++++++
>  .../arm/mediatek/mediatek,mt7986-wo-dlm.yaml  | 50 ++++++++++
>  4 files changed, 236 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/arm/mediatek/mediatek,mt7986-wo-boot.yaml
>  create mode 100644 Documentation/devicetree/bindings/arm/mediatek/mediatek,mt7986-wo-ccif.yaml
>  create mode 100644 Documentation/devicetree/bindings/arm/mediatek/mediatek,mt7986-wo-dlm.yaml
> 
> diff --git a/Documentation/devicetree/bindings/arm/mediatek/mediatek,mt7622-wed.yaml b/Documentation/devicetree/bindings/arm/mediatek/mediatek,mt7622-wed.yaml
> index 84fb0a146b6e..8e2905004790 100644
> --- a/Documentation/devicetree/bindings/arm/mediatek/mediatek,mt7622-wed.yaml
> +++ b/Documentation/devicetree/bindings/arm/mediatek/mediatek,mt7622-wed.yaml
> @@ -29,6 +29,41 @@ properties:
>    interrupts:
>      maxItems: 1
>  
> +  memory-region:
> +    minItems: 3

No need for minItems.

> +    maxItems: 3
> +    description:
> +      phandles to nodes describing reserved memory used by mt7986-wed firmware
> +      (see bindings/reserved-memory/reserved-memory.txt)
> +
> +  mediatek,wo-ccif:
> +    $ref: /schemas/types.yaml#/definitions/phandle
> +    description:
> +      Phandle to the mediatek wed-wo controller.
> +
> +  mediatek,wo-boot:
> +    $ref: /schemas/types.yaml#/definitions/phandle
> +    description:
> +      Phandle to the mediatek wed-wo boot interface.
> +
> +  mediatek,wo-dlm:
> +    $ref: /schemas/types.yaml#/definitions/phandle
> +    description:
> +      Phandle to the mediatek wed-wo rx hw ring.
> +
> +allOf:
> +  - if:
> +      properties:
> +        compatible:
> +          contains:
> +            const: mediatek,mt7986-wed
> +    then:
> +      properties:
> +        mediatek,wo-boot: true
> +        mediatek,wo-ccif: true
> +        mediatek,wo-dlm: true
> +        memory-region: true
> +
>  required:
>    - compatible
>    - reg
> @@ -49,3 +84,59 @@ examples:
>          interrupts = <GIC_SPI 214 IRQ_TYPE_LEVEL_LOW>;
>        };
>      };
> +
> +  - |
> +    #include <dt-bindings/interrupt-controller/arm-gic.h>
> +    #include <dt-bindings/interrupt-controller/irq.h>
> +    soc {
> +      #address-cells = <2>;
> +      #size-cells = <2>;
> +      reserved-memory {
> +        #address-cells = <2>;
> +        #size-cells = <2>;
> +
> +        wo_emi: wo-emi@4fd00000 {
> +          reg = <0 0x4fd00000 0 0x40000>;
> +          no-map;
> +        };
> +
> +        wo_data: wo-data@4fd80000 {
> +          reg = <0 0x4fd80000 0 0x240000>;
> +          no-map;
> +        };
> +
> +        wo_ilm: wo-ilm@151e0000 {
> +          reg = <0 0x151e0000 0 0x8000>;
> +          no-map;
> +        };
> +      };
> +
> +      wo_boot: wo-boot@15194000 {
> +        compatible = "mediatek,mt7986-wo-boot","syscon";
> +        reg = <0 0x15194000 0 0x1000>;
> +      };
> +
> +      wo_ccif0: wo-ccif@151a5000 {
> +        compatible = "mediatek,mt7986-wo-ccif","syscon";
> +        reg = <0 0x151a5000 0 0x1000>;
> +        interrupts = <GIC_SPI 211 IRQ_TYPE_LEVEL_HIGH>;
> +      };
> +
> +      wo_dlm0: wo-dlm@151e8000 {
> +        compatible = "mediatek,mt7986-wo-dlm";
> +        reg = <0 0x151e8000 0 0x2000>;
> +        resets = <&ethsysrst 0>;
> +        reset-names = "wocpu_rst";
> +      };
> +
> +      wed1: wed@1020a000 {
> +        compatible = "mediatek,mt7986-wed","syscon";
> +        reg = <0 0x15010000 0 0x1000>;
> +        interrupts = <GIC_SPI 205 IRQ_TYPE_LEVEL_HIGH>;
> +
> +        memory-region = <&wo_emi>, <&wo_data>, <&wo_ilm>;
> +        mediatek,wo-ccif = <&wo_ccif0>;
> +        mediatek,wo-boot = <&wo_boot>;
> +        mediatek,wo-dlm = <&wo_dlm0>;
> +      };
> +    };
> diff --git a/Documentation/devicetree/bindings/arm/mediatek/mediatek,mt7986-wo-boot.yaml b/Documentation/devicetree/bindings/arm/mediatek/mediatek,mt7986-wo-boot.yaml
> new file mode 100644
> index 000000000000..ce9c971e6604
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/arm/mediatek/mediatek,mt7986-wo-boot.yaml
> @@ -0,0 +1,46 @@
> +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: "http://devicetree.org/schemas/arm/mediatek/mediatek,mt7986-wo-boot.yaml#";
> +$schema: "http://devicetree.org/meta-schemas/core.yaml#";
> +
> +title:
> +  MediaTek Wireless Ethernet Dispatch WO boot controller interface for MT7986
> +
> +maintainers:
> +  - Lorenzo Bianconi <lorenzo@xxxxxxxxxx>
> +  - Felix Fietkau <nbd@xxxxxxxx>
> +
> +description:
> +  The mediatek wo-boot provides a configuration interface for WED WO
> +  boot controller on MT7986 soc.
> +
> +properties:
> +  compatible:
> +    items:
> +      - enum:
> +          - mediatek,mt7986-wo-boot
> +      - const: syscon
> +
> +  reg:
> +    maxItems: 1
> +
> +  interrupts:
> +    maxItems: 1
> +
> +required:
> +  - compatible
> +  - reg
> +
> +additionalProperties: false
> +
> +examples:
> +  - |
> +    soc {
> +      #address-cells = <2>;
> +      #size-cells = <2>;
> +      wo_boot: wo-boot@15194000 {
> +        compatible = "mediatek,mt7986-wo-boot","syscon";
> +        reg = <0 0x15194000 0 0x1000>;
> +      };
> +    };
> diff --git a/Documentation/devicetree/bindings/arm/mediatek/mediatek,mt7986-wo-ccif.yaml b/Documentation/devicetree/bindings/arm/mediatek/mediatek,mt7986-wo-ccif.yaml
> new file mode 100644
> index 000000000000..48cb27bcc4cd
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/arm/mediatek/mediatek,mt7986-wo-ccif.yaml
> @@ -0,0 +1,49 @@
> +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: "http://devicetree.org/schemas/arm/mediatek/mediatek,mt7986-wo-ccif.yaml#";
> +$schema: "http://devicetree.org/meta-schemas/core.yaml#";

No improvements...

> +
> +title: MediaTek Wireless Ethernet Dispatch WO Controller for MT7986
> +
> +maintainers:
> +  - Lorenzo Bianconi <lorenzo@xxxxxxxxxx>
> +  - Felix Fietkau <nbd@xxxxxxxx>
> +
> +description:
> +  The mediatek wo-ccif provides a configuration interface for WED WO
> +  controller on MT7986 soc.
> +
> +properties:
> +  compatible:
> +    items:
> +      - enum:
> +          - mediatek,mt7986-wo-ccif
> +      - const: syscon
> +
> +  reg:
> +    maxItems: 1
> +
> +  interrupts:
> +    maxItems: 1
> +
> +required:
> +  - compatible
> +  - reg
> +  - interrupts
> +
> +additionalProperties: false
> +
> +examples:
> +  - |
> +    #include <dt-bindings/interrupt-controller/arm-gic.h>
> +    #include <dt-bindings/interrupt-controller/irq.h>
> +    soc {
> +      #address-cells = <2>;
> +      #size-cells = <2>;
> +      wo_ccif0: wo-ccif@151a5000 {

This is still not entirely generic... What is wo-ccif?


> +        compatible = "mediatek,mt7986-wo-ccif","syscon";

Missing space.

All comments might apply to other places.


Best regards,
Krzysztof




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux