Re: [PATCH 1/2] dt-bindings: clock: Add bindings for Renesas ProXO

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 22/09/2022 14:06, Alex Helms wrote:
> On 9/15/2022 5:08 AM, Rob Herring wrote:
>> On Wed, Sep 14, 2022 at 02:18:08PM -0700, Alex Helms wrote:
>>> Add dt bindings for the Renesas ProXO oscillator.
>>>
>>> Signed-off-by: Alex Helms <alexander.helms.jy@xxxxxxxxxxx>

Please use scripts/get_maintainers.pl to get a list of necessary people
and lists to CC.  It might happen, that command when run on an older
kernel, gives you outdated entries.  Therefore please be sure you base
your patches on recent Linux kernel.

>>> ---
>>>  .../bindings/clock/renesas,proxo.yaml         | 50 +++++++++++++++++++
>>>  MAINTAINERS                                   |  5 ++
>>>  2 files changed, 55 insertions(+)
>>>  create mode 100644 Documentation/devicetree/bindings/clock/renesas,proxo.yaml
>>>
>>> diff --git a/Documentation/devicetree/bindings/clock/renesas,proxo.yaml b/Documentation/devicetree/bindings/clock/renesas,proxo.yaml
>>> new file mode 100644
>>> index 000000000..2ae131431
>>> --- /dev/null
>>> +++ b/Documentation/devicetree/bindings/clock/renesas,proxo.yaml
>>> @@ -0,0 +1,50 @@
>>> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
>>> +%YAML 1.2
>>> +---
>>> +$id: https://jpn01.safelinks.protection.outlook.com/?url=http%3A%2F%2Fdevicetree.org%2Fschemas%2Fclock%2Frenesas%2Cversaclock7.yaml%23&amp;data=05%7C01%7Calexander.helms.jy%40renesas.com%7C34ce960b2542459b61d408da97130b50%7C53d82571da1947e49cb4625a166a4a2a%7C0%7C0%7C637988405289843575%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C3000%7C%7C%7C&amp;sdata=izvR%2FXbUNVXknaODSnMmcetPnn%2Ff3Jk%2F6RuBdZ7uSa0%3D&amp;reserved=0
>>> +$schema: https://jpn01.safelinks.protection.outlook.com/?url=http%3A%2F%2Fdevicetree.org%2Fmeta-schemas%2Fcore.yaml%23&amp;data=05%7C01%7Calexander.helms.jy%40renesas.com%7C34ce960b2542459b61d408da97130b50%7C53d82571da1947e49cb4625a166a4a2a%7C0%7C0%7C637988405289843575%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C3000%7C%7C%7C&amp;sdata=dQ7nZtgfTE5DrXB1iavJuOhSWmGl4tYI1m6iZpkPAhA%3D&amp;reserved=0
>>> +
>>> +title: Renesas ProXO Oscillator Device Tree Bindings
>>> +
>>> +maintainers:
>>> +  - Alex Helms <alexander.helms.jy@xxxxxxxxxxx>
>>> +
>>> +description: |
>>
>> Don't need '|' if no formatting to preserve.
>>
>>> +  Renesas ProXO is a family of programmable ultra-low phase noise 
>>> +  quartz-based oscillators.
>>
>> Are they all the same from a s/w standpoint. If not you need specific 
>> compatibles for the differences. 
> 
> At this time only the XP variant is supported and this is reflected in
> the "compatible" string.

You should document everything, if possible, not what is supported by
some version of some system/driver/firmware.

> 
>>
>>> +
>>> +properties:
>>> +  '#clock-cells':
>>> +    const: 0
>>> +
>>> +  compatible:
>>> +    enum:
>>> +      - renesas,proxo-xp
>>> +
>>> +  reg:
>>> +    maxItems: 1
>>> +
>>> +  renesas,xtal:
>>> +    description: Internal crystal frequency, default is 50000000 (50MHz)
>>> +    $ref: /schemas/types.yaml#/definitions/uint32
>>
>> Use 'clock-frequency'.
> 
> I think "crystal-frequency" would make more sense. The parts come
> programmed to a factory clock frequency which is different than the
> internal crystal frequency.

We have a standard property and it should be used, when applicable.
Don't encode here frequency for something else than the driving clock.

Best regards,
Krzysztof




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux