From: Yassine Oudjana <y.oudjana@xxxxxxxxxxxxxx> The current description mentions having to put the pin controller node under a syscon node, but this is not the case in the current MT6779 device tree. This is not actually needed, so replace the current description with something more generic that describes the use of the hardware block. Signed-off-by: Yassine Oudjana <y.oudjana@xxxxxxxxxxxxxx> Reviewed-by: Rob Herring <robh@xxxxxxxxxx> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@xxxxxxxxxxxxx> --- .../bindings/pinctrl/mediatek,mt6779-pinctrl.yaml | 7 +++---- 1 file changed, 3 insertions(+), 4 deletions(-) diff --git a/Documentation/devicetree/bindings/pinctrl/mediatek,mt6779-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/mediatek,mt6779-pinctrl.yaml index 8c79fcef7c52..c6290bcdded6 100644 --- a/Documentation/devicetree/bindings/pinctrl/mediatek,mt6779-pinctrl.yaml +++ b/Documentation/devicetree/bindings/pinctrl/mediatek,mt6779-pinctrl.yaml @@ -9,10 +9,9 @@ title: Mediatek MT6779 Pin Controller maintainers: - Andy Teng <andy.teng@xxxxxxxxxxxx> -description: |+ - The pin controller node should be the child of a syscon node with the - required property: - - compatible: "syscon" +description: + The MediaTek pin controller on MT6779 is used to control pin + functions, pull up/down resistance and drive strength options. properties: compatible: -- 2.38.1
