Hi Caesar,
On Thu, Oct 23, 2014 at 05:40:05PM +0800, Caesar Wang wrote:
> This patch changes a dtsi file to contain the thermal data
> on RK3288 and later SoCs. This data will
> enable a thermal shutdown over 125C.
>
> Signed-off-by: Caesar Wang <caesar.wang@xxxxxxxxxxxxxx>
> ---
> arch/arm/boot/dts/rk3288-thermal.dtsi | 65 +++++++++++++++++++++++++++++++++++
> 1 file changed, 65 insertions(+)
> create mode 100644 arch/arm/boot/dts/rk3288-thermal.dtsi
>
> diff --git a/arch/arm/boot/dts/rk3288-thermal.dtsi b/arch/arm/boot/dts/rk3288-thermal.dtsi
> new file mode 100644
> index 0000000..c361262
> --- /dev/null
> +++ b/arch/arm/boot/dts/rk3288-thermal.dtsi
> @@ -0,0 +1,65 @@
> +/*
> + * Device Tree Source for RK3288 SoC thermal
> + *
> + * Copyright (c) 2014, Fuzhou Rockchip Electronics Co., Ltd
> + *
> + * This file is licensed under the terms of the GNU General Public License
> + * version 2. This program is licensed "as is" without any warranty of any
> + * kind, whether express or implied.
> + */
> +
> +#include <dt-bindings/thermal/thermal.h>
> +
> +reserve_thermal: reserve_thermal {
> + polling-delay-passive = <500>; /* milliseconds */
> + polling-delay = <1000>; /* milliseconds */
> +
> + /* sensor ID */
> + thermal-sensors = <&tsadc 0>;
> +
> +};
> +
> +cpu_thermal: cpu_thermal {
> + polling-delay-passive = <500>; /* milliseconds */
> + polling-delay = <1000>; /* milliseconds */
Given that the hardware supports alarm interrupts I think we should be
able to lower polling frequency. I'd say 5 seconds for polling-delay and
1 second for when we trip over passive point?
Thanks.
--
Dmitry
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
