SPI nodes defined in the top-level AM65x SoC dtsi files are incomplete
and will not be functional unless they are extended with pinmux
information.
As the pinmux is only known at the board integration level, these
nodes should only be enabled when provided with this information.
Disable the SPI nodes in the dtsi files and only enable the ones that
are actually pinned out on a given board.
Signed-off-by: Andrew Davis <afd@xxxxxx>
---
arch/arm64/boot/dts/ti/k3-am65-iot2050-common.dtsi | 1 +
arch/arm64/boot/dts/ti/k3-am65-main.dtsi | 5 +++++
arch/arm64/boot/dts/ti/k3-am65-mcu.dtsi | 3 +++
arch/arm64/boot/dts/ti/k3-am654-base-board.dts | 1 +
4 files changed, 10 insertions(+)
diff --git a/arch/arm64/boot/dts/ti/k3-am65-iot2050-common.dtsi b/arch/arm64/boot/dts/ti/k3-am65-iot2050-common.dtsi
index 945a8a70332e9..fa4b6eb02fa57 100644
--- a/arch/arm64/boot/dts/ti/k3-am65-iot2050-common.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-am65-iot2050-common.dtsi
@@ -574,6 +574,7 @@ &usb1 {
};
&mcu_spi0 {
+ status = "okay";
pinctrl-names = "default";
pinctrl-0 = <&mcu_spi0_pins_default>;
diff --git a/arch/arm64/boot/dts/ti/k3-am65-main.dtsi b/arch/arm64/boot/dts/ti/k3-am65-main.dtsi
index feef5fdb46886..74fd807d47396 100644
--- a/arch/arm64/boot/dts/ti/k3-am65-main.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-am65-main.dtsi
@@ -217,6 +217,7 @@ main_spi0: spi@2100000 {
#size-cells = <0>;
dmas = <&main_udmap 0xc500>, <&main_udmap 0x4500>;
dma-names = "tx0", "rx0";
+ status = "disabled";
};
main_spi1: spi@2110000 {
@@ -229,6 +230,7 @@ main_spi1: spi@2110000 {
#size-cells = <0>;
assigned-clocks = <&k3_clks 137 1>;
assigned-clock-rates = <48000000>;
+ status = "disabled";
};
main_spi2: spi@2120000 {
@@ -239,6 +241,7 @@ main_spi2: spi@2120000 {
power-domains = <&k3_pds 139 TI_SCI_PD_EXCLUSIVE>;
#address-cells = <1>;
#size-cells = <0>;
+ status = "disabled";
};
main_spi3: spi@2130000 {
@@ -249,6 +252,7 @@ main_spi3: spi@2130000 {
power-domains = <&k3_pds 140 TI_SCI_PD_EXCLUSIVE>;
#address-cells = <1>;
#size-cells = <0>;
+ status = "disabled";
};
main_spi4: spi@2140000 {
@@ -259,6 +263,7 @@ main_spi4: spi@2140000 {
power-domains = <&k3_pds 141 TI_SCI_PD_EXCLUSIVE>;
#address-cells = <1>;
#size-cells = <0>;
+ status = "disabled";
};
sdhci0: mmc@4f80000 {
diff --git a/arch/arm64/boot/dts/ti/k3-am65-mcu.dtsi b/arch/arm64/boot/dts/ti/k3-am65-mcu.dtsi
index dc0f439d2dacb..7a11501bad0bc 100644
--- a/arch/arm64/boot/dts/ti/k3-am65-mcu.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-am65-mcu.dtsi
@@ -58,6 +58,7 @@ mcu_spi0: spi@40300000 {
power-domains = <&k3_pds 142 TI_SCI_PD_EXCLUSIVE>;
#address-cells = <1>;
#size-cells = <0>;
+ status = "disabled";
};
mcu_spi1: spi@40310000 {
@@ -68,6 +69,7 @@ mcu_spi1: spi@40310000 {
power-domains = <&k3_pds 143 TI_SCI_PD_EXCLUSIVE>;
#address-cells = <1>;
#size-cells = <0>;
+ status = "disabled";
};
mcu_spi2: spi@40320000 {
@@ -78,6 +80,7 @@ mcu_spi2: spi@40320000 {
power-domains = <&k3_pds 144 TI_SCI_PD_EXCLUSIVE>;
#address-cells = <1>;
#size-cells = <0>;
+ status = "disabled";
};
tscadc0: tscadc@40200000 {
diff --git a/arch/arm64/boot/dts/ti/k3-am654-base-board.dts b/arch/arm64/boot/dts/ti/k3-am654-base-board.dts
index 991a8559b4c3b..3f5a5ebfc8f3c 100644
--- a/arch/arm64/boot/dts/ti/k3-am654-base-board.dts
+++ b/arch/arm64/boot/dts/ti/k3-am654-base-board.dts
@@ -342,6 +342,7 @@ &ecap0 {
};
&main_spi0 {
+ status = "okay";
pinctrl-names = "default";
pinctrl-0 = <&main_spi0_pins_default>;
#address-cells = <1>;
--
2.37.3
