I2C nodes defined in the top-level AM65x SoC dtsi files are incomplete
and will not be functional unless they are extended with pinmux
information.
As the pinmux is only known at the board integration level, these
nodes should only be enabled when provided with this information.
Disable the I2C nodes in the dtsi files and only enable the ones that
are actually pinned out on a given board.
Signed-off-by: Andrew Davis <afd@xxxxxx>
---
arch/arm64/boot/dts/ti/k3-am65-iot2050-common.dtsi | 6 ++++++
arch/arm64/boot/dts/ti/k3-am65-main.dtsi | 4 ++++
arch/arm64/boot/dts/ti/k3-am65-mcu.dtsi | 1 +
arch/arm64/boot/dts/ti/k3-am65-wakeup.dtsi | 1 +
arch/arm64/boot/dts/ti/k3-am654-base-board.dts | 9 +++++++++
5 files changed, 21 insertions(+)
diff --git a/arch/arm64/boot/dts/ti/k3-am65-iot2050-common.dtsi b/arch/arm64/boot/dts/ti/k3-am65-iot2050-common.dtsi
index 7b3087c19141c..945a8a70332e9 100644
--- a/arch/arm64/boot/dts/ti/k3-am65-iot2050-common.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-am65-iot2050-common.dtsi
@@ -411,12 +411,14 @@ &db9_com_mode_pins_default
};
&wkup_i2c0 {
+ status = "okay";
pinctrl-names = "default";
pinctrl-0 = <&wkup_i2c0_pins_default>;
clock-frequency = <400000>;
};
&mcu_i2c0 {
+ status = "okay";
pinctrl-names = "default";
pinctrl-0 = <&mcu_i2c0_pins_default>;
clock-frequency = <400000>;
@@ -476,6 +478,7 @@ pcal9535_3: gpio@25 {
};
&main_i2c0 {
+ status = "okay";
pinctrl-names = "default";
pinctrl-0 = <&main_i2c0_pins_default>;
clock-frequency = <400000>;
@@ -493,18 +496,21 @@ eeprom: eeprom@54 {
};
&main_i2c1 {
+ status = "okay";
pinctrl-names = "default";
pinctrl-0 = <&main_i2c1_pins_default>;
clock-frequency = <400000>;
};
&main_i2c2 {
+ status = "okay";
pinctrl-names = "default";
pinctrl-0 = <&main_i2c2_pins_default>;
clock-frequency = <400000>;
};
&main_i2c3 {
+ status = "okay";
pinctrl-names = "default";
pinctrl-0 = <&main_i2c3_pins_default>;
clock-frequency = <400000>;
diff --git a/arch/arm64/boot/dts/ti/k3-am65-main.dtsi b/arch/arm64/boot/dts/ti/k3-am65-main.dtsi
index ae414f5d83822..feef5fdb46886 100644
--- a/arch/arm64/boot/dts/ti/k3-am65-main.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-am65-main.dtsi
@@ -159,6 +159,7 @@ main_i2c0: i2c@2000000 {
clock-names = "fck";
clocks = <&k3_clks 110 1>;
power-domains = <&k3_pds 110 TI_SCI_PD_EXCLUSIVE>;
+ status = "disabled";
};
main_i2c1: i2c@2010000 {
@@ -170,6 +171,7 @@ main_i2c1: i2c@2010000 {
clock-names = "fck";
clocks = <&k3_clks 111 1>;
power-domains = <&k3_pds 111 TI_SCI_PD_EXCLUSIVE>;
+ status = "disabled";
};
main_i2c2: i2c@2020000 {
@@ -181,6 +183,7 @@ main_i2c2: i2c@2020000 {
clock-names = "fck";
clocks = <&k3_clks 112 1>;
power-domains = <&k3_pds 112 TI_SCI_PD_EXCLUSIVE>;
+ status = "disabled";
};
main_i2c3: i2c@2030000 {
@@ -192,6 +195,7 @@ main_i2c3: i2c@2030000 {
clock-names = "fck";
clocks = <&k3_clks 113 1>;
power-domains = <&k3_pds 113 TI_SCI_PD_EXCLUSIVE>;
+ status = "disabled";
};
ecap0: pwm@3100000 {
diff --git a/arch/arm64/boot/dts/ti/k3-am65-mcu.dtsi b/arch/arm64/boot/dts/ti/k3-am65-mcu.dtsi
index bb70097693802..dc0f439d2dacb 100644
--- a/arch/arm64/boot/dts/ti/k3-am65-mcu.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-am65-mcu.dtsi
@@ -47,6 +47,7 @@ mcu_i2c0: i2c@40b00000 {
clock-names = "fck";
clocks = <&k3_clks 114 1>;
power-domains = <&k3_pds 114 TI_SCI_PD_EXCLUSIVE>;
+ status = "disabled";
};
mcu_spi0: spi@40300000 {
diff --git a/arch/arm64/boot/dts/ti/k3-am65-wakeup.dtsi b/arch/arm64/boot/dts/ti/k3-am65-wakeup.dtsi
index bbe31532f984b..fd2b998ebddc4 100644
--- a/arch/arm64/boot/dts/ti/k3-am65-wakeup.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-am65-wakeup.dtsi
@@ -66,6 +66,7 @@ wkup_i2c0: i2c@42120000 {
clock-names = "fck";
clocks = <&k3_clks 115 1>;
power-domains = <&k3_pds 115 TI_SCI_PD_EXCLUSIVE>;
+ status = "disabled";
};
intr_wkup_gpio: interrupt-controller@42200000 {
diff --git a/arch/arm64/boot/dts/ti/k3-am654-base-board.dts b/arch/arm64/boot/dts/ti/k3-am654-base-board.dts
index 956e9bc946b5f..991a8559b4c3b 100644
--- a/arch/arm64/boot/dts/ti/k3-am654-base-board.dts
+++ b/arch/arm64/boot/dts/ti/k3-am654-base-board.dts
@@ -284,6 +284,7 @@ &main_uart0 {
};
&wkup_i2c0 {
+ status = "okay";
pinctrl-names = "default";
pinctrl-0 = <&wkup_i2c0_pins_default>;
clock-frequency = <400000>;
@@ -302,7 +303,13 @@ pca9554: gpio@39 {
};
};
+&mcu_i2c0 {
+ status = "okay";
+ /* Default pinmux */
+};
+
&main_i2c0 {
+ status = "okay";
pinctrl-names = "default";
pinctrl-0 = <&main_i2c0_pins_default>;
clock-frequency = <400000>;
@@ -316,12 +323,14 @@ pca9555: gpio@21 {
};
&main_i2c1 {
+ status = "okay";
pinctrl-names = "default";
pinctrl-0 = <&main_i2c1_pins_default>;
clock-frequency = <400000>;
};
&main_i2c2 {
+ status = "okay";
pinctrl-names = "default";
pinctrl-0 = <&main_i2c2_pins_default>;
clock-frequency = <400000>;
--
2.37.3
