[PATCH v4 6/7] ARM: mediatek: Add sysirq in mt6589/mt8135/mt8127 dtsi

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




Add sysirq settings for mt6589/mt8135/mt8127
This also correct timer interrupt flag. The old flag setting
works because boot loader already set polarity for timer
interrupt. Without intpol support, the setting was not changed
so gic can get the irq correctly.

Signed-off-by: Yingjoe Chen <yingjoe.chen@xxxxxxxxxxxx>
---
 arch/arm/boot/dts/mt6589.dtsi | 13 +++++++++++--
 arch/arm/boot/dts/mt8127.dtsi | 13 +++++++++++--
 arch/arm/boot/dts/mt8135.dtsi | 13 +++++++++++--
 3 files changed, 33 insertions(+), 6 deletions(-)

diff --git a/arch/arm/boot/dts/mt6589.dtsi b/arch/arm/boot/dts/mt6589.dtsi
index e3c7600..e7e7ddf 100644
--- a/arch/arm/boot/dts/mt6589.dtsi
+++ b/arch/arm/boot/dts/mt6589.dtsi
@@ -19,7 +19,7 @@
 
 / {
 	compatible = "mediatek,mt6589";
-	interrupt-parent = <&gic>;
+	interrupt-parent = <&sysirq>;
 
 	cpus {
 		#address-cells = <1>;
@@ -76,15 +76,24 @@
 		timer: timer@10008000 {
 			compatible = "mediatek,mt6577-timer";
 			reg = <0x10008000 0x80>;
-			interrupts = <GIC_SPI 113 IRQ_TYPE_EDGE_RISING>;
+			interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_LOW>;
 			clocks = <&system_clk>, <&rtc_clk>;
 			clock-names = "system-clk", "rtc-clk";
 		};
 
+		sysirq: interrupt-controller@10200100 {
+			compatible = "mediatek,mt6589-sysirq", "mediatek,mt6577-sysirq";
+			interrupt-controller;
+			#interrupt-cells = <3>;
+			interrupt-parent = <&gic>;
+			reg = <0 0x10200100 0 0x1c>;
+		};
+
 		gic: interrupt-controller@10211000 {
 			compatible = "arm,cortex-a7-gic";
 			interrupt-controller;
 			#interrupt-cells = <3>;
+			interrupt-parent = <&gic>;
 			reg = <0x10211000 0x1000>,
 			      <0x10212000 0x1000>,
 			      <0x10214000 0x2000>,
diff --git a/arch/arm/boot/dts/mt8127.dtsi b/arch/arm/boot/dts/mt8127.dtsi
index 65d279d..adc6f2d 100644
--- a/arch/arm/boot/dts/mt8127.dtsi
+++ b/arch/arm/boot/dts/mt8127.dtsi
@@ -18,7 +18,7 @@
 
 / {
 	compatible = "mediatek,mt8127";
-	interrupt-parent = <&gic>;
+	interrupt-parent = <&sysirq>;
 
 	cpus {
 		#address-cells = <1>;
@@ -81,15 +81,24 @@
 		timer: timer@10008000 {
 			compatible = "mediatek,mt8127-timer", "mediatek,mt6577-timer";
 			reg = <0 0x10008000 0 0x80>;
-			interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_LOW>;
 			clocks = <&system_clk>, <&rtc_clk>;
 			clock-names = "system-clk", "rtc-clk";
 		};
 
+		sysirq: interrupt-controller@10200100 {
+			compatible = "mediatek,mt8127-sysirq", "mediatek,mt6577-sysirq";
+			interrupt-controller;
+			#interrupt-cells = <3>;
+			interrupt-parent = <&gic>;
+			reg = <0 0x10200100 0 0x1c>;
+		};
+
 		gic: interrupt-controller@10211000 {
 			compatible = "arm,cortex-a7-gic";
 			interrupt-controller;
 			#interrupt-cells = <3>;
+			interrupt-parent = <&gic>;
 			reg = <0 0x10211000 0 0x1000>,
 			      <0 0x10212000 0 0x1000>,
 			      <0 0x10214000 0 0x2000>,
diff --git a/arch/arm/boot/dts/mt8135.dtsi b/arch/arm/boot/dts/mt8135.dtsi
index f89a4f5..9627320 100644
--- a/arch/arm/boot/dts/mt8135.dtsi
+++ b/arch/arm/boot/dts/mt8135.dtsi
@@ -18,7 +18,7 @@
 
 / {
 	compatible = "mediatek,mt8135";
-	interrupt-parent = <&gic>;
+	interrupt-parent = <&sysirq>;
 
 	cpu-map {
 		cluster0 {
@@ -103,15 +103,24 @@
 		timer: timer@10008000 {
 			compatible = "mediatek,mt8135-timer", "mediatek,mt6577-timer";
 			reg = <0 0x10008000 0 0x80>;
-			interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_LOW>;
 			clocks = <&system_clk>, <&rtc_clk>;
 			clock-names = "system-clk", "rtc-clk";
 		};
 
+		sysirq: interrupt-controller@10200030 {
+			compatible = "mediatek,mt8135-sysirq", "mediatek,mt6577-sysirq";
+			interrupt-controller;
+			#interrupt-cells = <3>;
+			interrupt-parent = <&gic>;
+			reg = <0 0x10200030 0 0x1c>;
+		};
+
 		gic: interrupt-controller@10211000 {
 			compatible = "arm,cortex-a15-gic";
 			interrupt-controller;
 			#interrupt-cells = <3>;
+			interrupt-parent = <&gic>;
 			reg = <0 0x10211000 0 0x1000>,
 			      <0 0x10212000 0 0x1000>,
 			      <0 0x10214000 0 0x2000>,
-- 
1.8.1.1.dirty

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]
  Powered by Linux