Up until now, the external MDIO controller frequency values relied
either on the default ones out of reset or on those setup by u-boot.
Let's just properly specify the MDC frequency in the DTS so that even
without u-boot's intervention Linux can drive the MDIO bus.
This patch set adds the needed properties on all DPAA2 based SoCs.
Ioana Ciornei (3):
arm64: dts: lx2160a: specify clock frequencies for the MDIO
controllers
arm64: dts: ls1088a: specify clock frequencies for the MDIO
controllers
arm64: dts: ls208xa: specify clock frequencies for the MDIO
controllers
arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi | 6 ++++++
arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi | 6 ++++++
arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi | 6 ++++++
3 files changed, 18 insertions(+)
--
2.25.1
