Use one-based indexing throughout the file for BLSP devices to avoid
confusion. Most of the node names and labels are consistent already.
This patch just fixes a few pinconf node names to match the one-based
indexing used in the label names.
Signed-off-by: Harry Austen <hpausten@xxxxxxxxxxxxxx>
---
v1 -> v2: no changes
arch/arm64/boot/dts/qcom/msm8996.dtsi | 18 +++++++++---------
1 file changed, 9 insertions(+), 9 deletions(-)
diff --git a/arch/arm64/boot/dts/qcom/msm8996.dtsi b/arch/arm64/boot/dts/qcom/msm8996.dtsi
index 5ff8de3e3de7..39afd8a99488 100644
--- a/arch/arm64/boot/dts/qcom/msm8996.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8996.dtsi
@@ -1304,14 +1304,14 @@ blsp1_spi1_sleep: blsp1-spi1-sleep {
bias-pull-down;
};
- blsp2_uart2_2pins_default: blsp2-uart1-2pins {
+ blsp2_uart2_2pins_default: blsp2-uart2-2pins {
pins = "gpio4", "gpio5";
function = "blsp_uart8";
drive-strength = <16>;
bias-disable;
};
- blsp2_uart2_2pins_sleep: blsp2-uart1-2pins-sleep {
+ blsp2_uart2_2pins_sleep: blsp2-uart2-2pins-sleep {
pins = "gpio4", "gpio5";
function = "gpio";
drive-strength = <2>;
@@ -1478,28 +1478,28 @@ blsp1_uart2_sleep: blsp1-uart2-sleep {
bias-disable;
};
- blsp1_i2c3_default: blsp1-i2c2-default {
+ blsp1_i2c3_default: blsp1-i2c3-default {
pins = "gpio47", "gpio48";
function = "blsp_i2c3";
drive-strength = <16>;
bias-disable;
};
- blsp1_i2c3_sleep: blsp1-i2c2-sleep {
+ blsp1_i2c3_sleep: blsp1-i2c3-sleep {
pins = "gpio47", "gpio48";
function = "gpio";
drive-strength = <2>;
bias-disable;
};
- blsp2_uart3_4pins_default: blsp2-uart2-4pins {
+ blsp2_uart3_4pins_default: blsp2-uart3-4pins {
pins = "gpio49", "gpio50", "gpio51", "gpio52";
function = "blsp_uart9";
drive-strength = <16>;
bias-disable;
};
- blsp2_uart3_4pins_sleep: blsp2-uart2-4pins-sleep {
+ blsp2_uart3_4pins_sleep: blsp2-uart3-4pins-sleep {
pins = "gpio49", "gpio50", "gpio51", "gpio52";
function = "blsp_uart9";
drive-strength = <2>;
@@ -1535,7 +1535,7 @@ blsp2_i2c1_default: blsp2-i2c1 {
bias-disable;
};
- blsp2_i2c1_sleep: blsp2-i2c0-sleep {
+ blsp2_i2c1_sleep: blsp2-i2c1-sleep {
pins = "gpio55", "gpio56";
function = "gpio";
drive-strength = <2>;
@@ -1567,7 +1567,7 @@ cdc_reset_sleep: cdc-reset-sleep {
output-low;
};
- blsp2_spi6_default: blsp2-spi5-default {
+ blsp2_spi6_default: blsp2-spi6-default {
spi {
pins = "gpio85", "gpio86", "gpio88";
function = "blsp_spi12";
@@ -1584,7 +1584,7 @@ cs {
};
};
- blsp2_spi6_sleep: blsp2-spi5-sleep {
+ blsp2_spi6_sleep: blsp2-spi6-sleep {
pins = "gpio85", "gpio86", "gpio87", "gpio88";
function = "gpio";
drive-strength = <2>;
--
2.38.1
