On Thu, Oct 20, 2022 at 10:38:54AM +0200, Emil Renner Berthing wrote: > This adds the 4 GPIO controlled LEDs to the Microchip PolarFire-SoC > Icicle Kit device tree. The schematic doesn't specify any special > function for the LEDs, so they're added here without any default > triggers and named led1, led2, led3 and led4 just like in the schematic. > > Signed-off-by: Emil Renner Berthing <emil.renner.berthing@xxxxxxxxxxxxx> Hey Emil, I applied this with a a minor modification to the subject & a s/This adds/Add/. Messing w/ my setup so no b4-ty mail, but it should be here: https://git.kernel.org/conor/c/0d814000ad3589bf4f69c9cb25a3b77bbd55ffec Thanks, Conor. > --- > .../boot/dts/microchip/mpfs-icicle-kit.dts | 30 +++++++++++++++++++ > 1 file changed, 30 insertions(+) > > diff --git a/arch/riscv/boot/dts/microchip/mpfs-icicle-kit.dts b/arch/riscv/boot/dts/microchip/mpfs-icicle-kit.dts > index ec7b7c2a3ce2..11ba4417f11a 100644 > --- a/arch/riscv/boot/dts/microchip/mpfs-icicle-kit.dts > +++ b/arch/riscv/boot/dts/microchip/mpfs-icicle-kit.dts > @@ -5,6 +5,8 @@ > > #include "mpfs.dtsi" > #include "mpfs-icicle-kit-fabric.dtsi" > +#include <dt-bindings/gpio/gpio.h> > +#include <dt-bindings/leds/common.h> > > /* Clock frequency (in Hz) of the rtcclk */ > #define RTCCLK_FREQ 1000000 > @@ -31,6 +33,34 @@ cpus { > timebase-frequency = <RTCCLK_FREQ>; > }; > > + leds { > + compatible = "gpio-leds"; > + > + led-1 { > + gpios = <&gpio2 16 GPIO_ACTIVE_HIGH>; > + color = <LED_COLOR_ID_RED>; > + label = "led1"; > + }; > + > + led-2 { > + gpios = <&gpio2 17 GPIO_ACTIVE_HIGH>; > + color = <LED_COLOR_ID_RED>; > + label = "led2"; > + }; > + > + led-3 { > + gpios = <&gpio2 18 GPIO_ACTIVE_HIGH>; > + color = <LED_COLOR_ID_AMBER>; > + label = "led3"; > + }; > + > + led-4 { > + gpios = <&gpio2 19 GPIO_ACTIVE_HIGH>; > + color = <LED_COLOR_ID_AMBER>; > + label = "led4"; > + }; > + }; > + > ddrc_cache_lo: memory@80000000 { > device_type = "memory"; > reg = <0x0 0x80000000 0x0 0x40000000>; > -- > 2.37.2 >
