The following series of patches enables RPi header
on j721e sk. It is a 40 pin io expasion header which
brings out i2c5, ehrpwm 2,3 and some pins of gpio 0,1
v6:
- Rebased to 6.1-rc1
v5:
- Enable only gpio's and i2c on the RPi Header
as per the discussion in the v4
v4:
- Correct the node name in dt binding example
v3:
- Change node name from clock to clock-controller
- Add correct description for clock-controller node
v2:
- Add full path for clock property $ref
- Remove the discription for clock pattern property,
since $ref is added
- Remove the label in the example
- Fix the indentation in the example
Sinthu Raja (1):
arm64: dts: ti: k3-j721e-sk: Add pinmux for RPi Header
Vijay Pothukuchi (1):
arm64: dts: ti: k3-j721e-*: Add dts nodes for EHRPWMs
.../dts/ti/k3-j721e-common-proc-board.dts | 24 ++++++
arch/arm64/boot/dts/ti/k3-j721e-main.dtsi | 62 ++++++++++++++-
arch/arm64/boot/dts/ti/k3-j721e-sk.dts | 79 ++++++++++++++++++-
3 files changed, 163 insertions(+), 2 deletions(-)
--
2.38.0
