From: Rafał Miłecki <rafal@xxxxxxxxxx>
Linux needs to know what to use as root device. On embedded devices with
flash the only common way to specify that is cmdline & root= parameter.
That solution works with U-Boot which is Linux & cmdline aware but isn't
available with all market bootloaders. Also that method is fragile:
1. Requires specific probing order on multi-flash devices
2. Uses hardcoded partitions indexes
A lot of devices use different partitioning methods. It may be
"fixed-partitions" or some dynamic partitioning (e.g. based on parts
table). For such cases allow "linux,rootfs" property to mark correct
flash partition.
Signed-off-by: Rafał Miłecki <rafal@xxxxxxxxxx>
---
V2: Use "linux,rootfs" as more accurate. Thanks Rob.
---
.../devicetree/bindings/mtd/partitions/fixed-partitions.yaml | 1 +
.../devicetree/bindings/mtd/partitions/partition.yaml | 4 ++++
2 files changed, 5 insertions(+)
diff --git a/Documentation/devicetree/bindings/mtd/partitions/fixed-partitions.yaml b/Documentation/devicetree/bindings/mtd/partitions/fixed-partitions.yaml
index ad3ccd250802..d66a6e3bcb56 100644
--- a/Documentation/devicetree/bindings/mtd/partitions/fixed-partitions.yaml
+++ b/Documentation/devicetree/bindings/mtd/partitions/fixed-partitions.yaml
@@ -84,6 +84,7 @@ examples:
partition@0 {
label = "filesystem";
reg = <0x00000000 0x1 0x00000000>;
+ linux,rootfs;
};
};
diff --git a/Documentation/devicetree/bindings/mtd/partitions/partition.yaml b/Documentation/devicetree/bindings/mtd/partitions/partition.yaml
index f1a02d840b12..a25cd23a34c0 100644
--- a/Documentation/devicetree/bindings/mtd/partitions/partition.yaml
+++ b/Documentation/devicetree/bindings/mtd/partitions/partition.yaml
@@ -52,6 +52,10 @@ properties:
immune to paired-pages corruptions
type: boolean
+ linux,rootfs:
+ description: Marks partition that contains root filesystem to mount and boot
+ user space from
+
if:
not:
required: [ reg ]
--
2.34.1
