[PATCH 01/12] arm64: dts: ti: k3-j721e: Enable UART nodes at the board level

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



UART nodes defined in the top-level J721e SoC dtsi files are incomplete
and may not be functional unless they are extended with pinmux
information.

As the pinmux is only known at the board integration level, these
nodes should only be enabled when provided with this information.

Disable the UART nodes in the dtsi files and only enable the ones that
are actually pinned out on a given board.

Signed-off-by: Andrew Davis <afd@xxxxxx>
---
 .../dts/ti/k3-j721e-common-proc-board.dts     | 40 +++++++-----------
 arch/arm64/boot/dts/ti/k3-j721e-main.dtsi     | 10 +++++
 .../boot/dts/ti/k3-j721e-mcu-wakeup.dtsi      |  2 +
 arch/arm64/boot/dts/ti/k3-j721e-sk.dts        | 42 ++++---------------
 4 files changed, 37 insertions(+), 57 deletions(-)

diff --git a/arch/arm64/boot/dts/ti/k3-j721e-common-proc-board.dts b/arch/arm64/boot/dts/ti/k3-j721e-common-proc-board.dts
index b1691ac3442dc..01afacfe6faaa 100644
--- a/arch/arm64/boot/dts/ti/k3-j721e-common-proc-board.dts
+++ b/arch/arm64/boot/dts/ti/k3-j721e-common-proc-board.dts
@@ -370,38 +370,30 @@ &wkup_uart0 {
 	status = "reserved";
 };
 
-&main_uart0 {
-	power-domains = <&k3_pds 146 TI_SCI_PD_SHARED>;
-};
-
-&main_uart3 {
-	/* UART not brought out */
-	status = "disabled";
-};
-
-&main_uart5 {
-	/* UART not brought out */
-	status = "disabled";
+&mcu_uart0 {
+	status = "okay";
+	/* Default pinmux */
 };
 
-&main_uart6 {
-	/* UART not brought out */
-	status = "disabled";
+&main_uart0 {
+	status = "okay";
+	/* Shared with ATF on this platform */
+	power-domains = <&k3_pds 146 TI_SCI_PD_SHARED>;
 };
 
-&main_uart7 {
-	/* UART not brought out */
-	status = "disabled";
+&main_uart1 {
+	status = "okay";
+	/* Default pinmux */
 };
 
-&main_uart8 {
-	/* UART not brought out */
-	status = "disabled";
+&main_uart2 {
+	status = "okay";
+	/* Default pinmux */
 };
 
-&main_uart9 {
-	/* UART not brought out */
-	status = "disabled";
+&main_uart4 {
+	status = "okay";
+	/* Default pinmux */
 };
 
 &main_gpio2 {
diff --git a/arch/arm64/boot/dts/ti/k3-j721e-main.dtsi b/arch/arm64/boot/dts/ti/k3-j721e-main.dtsi
index 917c9dc99efaa..5f85d1cc8b277 100644
--- a/arch/arm64/boot/dts/ti/k3-j721e-main.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-j721e-main.dtsi
@@ -840,6 +840,7 @@ main_uart0: serial@2800000 {
 		power-domains = <&k3_pds 146 TI_SCI_PD_EXCLUSIVE>;
 		clocks = <&k3_clks 146 0>;
 		clock-names = "fclk";
+		status = "disabled";
 	};
 
 	main_uart1: serial@2810000 {
@@ -851,6 +852,7 @@ main_uart1: serial@2810000 {
 		power-domains = <&k3_pds 278 TI_SCI_PD_EXCLUSIVE>;
 		clocks = <&k3_clks 278 0>;
 		clock-names = "fclk";
+		status = "disabled";
 	};
 
 	main_uart2: serial@2820000 {
@@ -862,6 +864,7 @@ main_uart2: serial@2820000 {
 		power-domains = <&k3_pds 279 TI_SCI_PD_EXCLUSIVE>;
 		clocks = <&k3_clks 279 0>;
 		clock-names = "fclk";
+		status = "disabled";
 	};
 
 	main_uart3: serial@2830000 {
@@ -873,6 +876,7 @@ main_uart3: serial@2830000 {
 		power-domains = <&k3_pds 280 TI_SCI_PD_EXCLUSIVE>;
 		clocks = <&k3_clks 280 0>;
 		clock-names = "fclk";
+		status = "disabled";
 	};
 
 	main_uart4: serial@2840000 {
@@ -884,6 +888,7 @@ main_uart4: serial@2840000 {
 		power-domains = <&k3_pds 281 TI_SCI_PD_EXCLUSIVE>;
 		clocks = <&k3_clks 281 0>;
 		clock-names = "fclk";
+		status = "disabled";
 	};
 
 	main_uart5: serial@2850000 {
@@ -895,6 +900,7 @@ main_uart5: serial@2850000 {
 		power-domains = <&k3_pds 282 TI_SCI_PD_EXCLUSIVE>;
 		clocks = <&k3_clks 282 0>;
 		clock-names = "fclk";
+		status = "disabled";
 	};
 
 	main_uart6: serial@2860000 {
@@ -906,6 +912,7 @@ main_uart6: serial@2860000 {
 		power-domains = <&k3_pds 283 TI_SCI_PD_EXCLUSIVE>;
 		clocks = <&k3_clks 283 0>;
 		clock-names = "fclk";
+		status = "disabled";
 	};
 
 	main_uart7: serial@2870000 {
@@ -917,6 +924,7 @@ main_uart7: serial@2870000 {
 		power-domains = <&k3_pds 284 TI_SCI_PD_EXCLUSIVE>;
 		clocks = <&k3_clks 284 0>;
 		clock-names = "fclk";
+		status = "disabled";
 	};
 
 	main_uart8: serial@2880000 {
@@ -928,6 +936,7 @@ main_uart8: serial@2880000 {
 		power-domains = <&k3_pds 285 TI_SCI_PD_EXCLUSIVE>;
 		clocks = <&k3_clks 285 0>;
 		clock-names = "fclk";
+		status = "disabled";
 	};
 
 	main_uart9: serial@2890000 {
@@ -939,6 +948,7 @@ main_uart9: serial@2890000 {
 		power-domains = <&k3_pds 286 TI_SCI_PD_EXCLUSIVE>;
 		clocks = <&k3_clks 286 0>;
 		clock-names = "fclk";
+		status = "disabled";
 	};
 
 	main_gpio0: gpio@600000 {
diff --git a/arch/arm64/boot/dts/ti/k3-j721e-mcu-wakeup.dtsi b/arch/arm64/boot/dts/ti/k3-j721e-mcu-wakeup.dtsi
index df08724bbf1c5..fce88ed23596d 100644
--- a/arch/arm64/boot/dts/ti/k3-j721e-mcu-wakeup.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-j721e-mcu-wakeup.dtsi
@@ -79,6 +79,7 @@ wkup_uart0: serial@42300000 {
 		power-domains = <&k3_pds 287 TI_SCI_PD_EXCLUSIVE>;
 		clocks = <&k3_clks 287 0>;
 		clock-names = "fclk";
+		status = "disabled";
 	};
 
 	mcu_uart0: serial@40a00000 {
@@ -90,6 +91,7 @@ mcu_uart0: serial@40a00000 {
 		power-domains = <&k3_pds 149 TI_SCI_PD_EXCLUSIVE>;
 		clocks = <&k3_clks 149 0>;
 		clock-names = "fclk";
+		status = "disabled";
 	};
 
 	wkup_gpio_intr: interrupt-controller@42200000 {
diff --git a/arch/arm64/boot/dts/ti/k3-j721e-sk.dts b/arch/arm64/boot/dts/ti/k3-j721e-sk.dts
index 80358cba6954c..23538c5f43575 100644
--- a/arch/arm64/boot/dts/ti/k3-j721e-sk.dts
+++ b/arch/arm64/boot/dts/ti/k3-j721e-sk.dts
@@ -475,46 +475,22 @@ &wkup_uart0 {
 	status = "reserved";
 };
 
+&mcu_uart0 {
+	status = "okay";
+	/* Default pinmux */
+};
+
 &main_uart0 {
+	status = "okay";
 	pinctrl-names = "default";
 	pinctrl-0 = <&main_uart0_pins_default>;
 	/* Shared with ATF on this platform */
 	power-domains = <&k3_pds 146 TI_SCI_PD_SHARED>;
 };
 
-&main_uart2 {
-	/* Brought out on RPi header */
-	status = "disabled";
-};
-
-&main_uart3 {
-	/* UART not brought out */
-	status = "disabled";
-};
-
-&main_uart5 {
-	/* UART not brought out */
-	status = "disabled";
-};
-
-&main_uart6 {
-	/* UART not brought out */
-	status = "disabled";
-};
-
-&main_uart7 {
-	/* UART not brought out */
-	status = "disabled";
-};
-
-&main_uart8 {
-	/* UART not brought out */
-	status = "disabled";
-};
-
-&main_uart9 {
-	/* Brought out on M.2 E Key */
-	status = "disabled";
+&main_uart1 {
+	status = "okay";
+	/* Default pinmux */
 };
 
 &main_sdhci0 {
-- 
2.37.3




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux