From: ChiYuan Huang <cy_huang@xxxxxxxxxxx> Add bindings for the Richtek RT9759 smart cap divider charger. Signed-off-by: ChiYuan Huang <cy_huang@xxxxxxxxxxx> Reviewed-by: Rob Herring <robh@xxxxxxxxxx> --- .../bindings/power/supply/richtek,rt9759.yaml | 61 ++++++++++++++++++++++ 1 file changed, 61 insertions(+) create mode 100644 Documentation/devicetree/bindings/power/supply/richtek,rt9759.yaml diff --git a/Documentation/devicetree/bindings/power/supply/richtek,rt9759.yaml b/Documentation/devicetree/bindings/power/supply/richtek,rt9759.yaml new file mode 100644 index 00000000..04fc6b0 --- /dev/null +++ b/Documentation/devicetree/bindings/power/supply/richtek,rt9759.yaml @@ -0,0 +1,61 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/power/supply/richtek,rt9759.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Richtek RT9759 Smart Cap Divider Charger + +maintainers: + - ChiYuan Huang <cy_huang@xxxxxxxxxxx> + +description: | + The RT9759 is a high efficiency and high charge current charger. + The efficiency is up to 97.8% when VBAT = 4.2V, IBAT = 2.5A and the maximum + charge current is up to 8A. The device integrates smart cap divider topology + with dual phase charge pump core. The ADCs provide input and output voltage, + current and temperature information to monitor the whole charging process. + + Datasheet is available at + https://www.richtek.com/assets/product_file/RT9759/DS9759-02.pdf + +properties: + compatible: + enum: + - richtek,rt9759 + + reg: + maxItems: 1 + + wakeup-source: true + + interrupts: + maxItems: 1 + + shunt-resistor-micro-ohms: + description: Battery current sense resistor mounted. + default: 2000 + +required: + - compatible + - reg + - wakeup-source + - interrupts + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + i2c { + #address-cells = <1>; + #size-cells = <0>; + + charger@66 { + compatible = "richtek,rt9759"; + reg = <0x66>; + wakeup-source; + interrupts-extended = <&gpio_intc 32 IRQ_TYPE_EDGE_FALLING>; + shunt-resistor-micro-ohms = <5000>; + }; + }; -- 2.7.4
