DT schema expects TLMM pin configuration nodes to be named with
'-state' suffix and their optional children with '-pins' suffix.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
Reviewed-by: Konrad Dybcio <konrad.dybcio@xxxxxxxxxxxxxx>
---
Changes since v3:
1. Add Rb tag.
Changes since v2:
1. None
---
.../boot/dts/qcom/msm8998-clamshell.dtsi | 7 +-
.../boot/dts/qcom/msm8998-fxtec-pro1.dts | 16 ++--
arch/arm64/boot/dts/qcom/msm8998-mtp.dts | 4 +-
.../dts/qcom/msm8998-oneplus-cheeseburger.dts | 10 +--
.../boot/dts/qcom/msm8998-oneplus-common.dtsi | 14 ++--
.../dts/qcom/msm8998-sony-xperia-yoshino.dtsi | 30 ++++----
arch/arm64/boot/dts/qcom/msm8998.dtsi | 76 +++++++++----------
7 files changed, 78 insertions(+), 79 deletions(-)
diff --git a/arch/arm64/boot/dts/qcom/msm8998-clamshell.dtsi b/arch/arm64/boot/dts/qcom/msm8998-clamshell.dtsi
index 7928b8197474..16685fadd3e1 100644
--- a/arch/arm64/boot/dts/qcom/msm8998-clamshell.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8998-clamshell.dtsi
@@ -35,7 +35,7 @@ bluetooth {
};
&blsp1_uart3_on {
- rx {
+ rx-pins {
/delete-property/ bias-disable;
/*
* Configure a pull-up on 45 (RX). This is needed to
@@ -46,7 +46,7 @@ rx {
bias-pull-up;
};
- cts {
+ cts-pins {
/delete-property/ bias-disable;
/*
* Configure a pull-down on 47 (CTS) to match the pull
@@ -357,8 +357,9 @@ &sdhc2 {
&tlmm {
gpio-reserved-ranges = <0 4>, <81 4>;
- touchpad: touchpad-pin {
+ touchpad: touchpad-pin-state {
pins = "gpio123";
+ function = "gpio";
bias-pull-up;
};
};
diff --git a/arch/arm64/boot/dts/qcom/msm8998-fxtec-pro1.dts b/arch/arm64/boot/dts/qcom/msm8998-fxtec-pro1.dts
index 429ba57e20f7..5fc0564664cf 100644
--- a/arch/arm64/boot/dts/qcom/msm8998-fxtec-pro1.dts
+++ b/arch/arm64/boot/dts/qcom/msm8998-fxtec-pro1.dts
@@ -216,7 +216,7 @@ bluetooth {
};
&blsp1_uart3_on {
- rx {
+ rx-pins {
/delete-property/ bias-disable;
/*
* Configure a pull-up on 45 (RX). This is needed to
@@ -227,7 +227,7 @@ rx {
bias-pull-up;
};
- cts {
+ cts-pins {
/delete-property/ bias-disable;
/*
* Configure a pull-down on 47 (CTS) to match the pull
@@ -615,14 +615,14 @@ &remoteproc_slpi {
&tlmm {
gpio-reserved-ranges = <0 4>;
- mdp_vsync_n: mdp-vsync-n {
+ mdp_vsync_n: mdp-vsync-n-state {
pins = "gpio10";
function = "mdp_vsync_a";
bias-pull-down;
drive-strength = <2>;
};
- gpio_kb_pins_extra: gpio-kb-pins-extra {
+ gpio_kb_pins_extra: gpio-kb-pins-extra-state {
pins = "gpio21", "gpio32", "gpio33", "gpio114",
"gpio128", "gpio129";
function = "gpio";
@@ -630,21 +630,21 @@ gpio_kb_pins_extra: gpio-kb-pins-extra {
bias-pull-up;
};
- ts_vio_default: ts-vio-def {
+ ts_vio_default: ts-vio-def-state {
pins = "gpio81";
function = "gpio";
bias-disable;
drive-strength = <2>;
};
- ts_rst_n: ts-rst-n {
+ ts_rst_n: ts-rst-n-state {
pins = "gpio89";
function = "gpio";
bias-pull-up;
drive-strength = <8>;
};
- hall_sensor1_default: hall-sensor1-def {
+ hall_sensor1_default: hall-sensor1-def-state {
pins = "gpio124";
function = "gpio";
bias-disable;
@@ -652,7 +652,7 @@ hall_sensor1_default: hall-sensor1-def {
input-enable;
};
- ts_int_n: ts-int-n {
+ ts_int_n: ts-int-n-state {
pins = "gpio125";
function = "gpio";
bias-disable;
diff --git a/arch/arm64/boot/dts/qcom/msm8998-mtp.dts b/arch/arm64/boot/dts/qcom/msm8998-mtp.dts
index a3ca58100aee..61f5a827a8d7 100644
--- a/arch/arm64/boot/dts/qcom/msm8998-mtp.dts
+++ b/arch/arm64/boot/dts/qcom/msm8998-mtp.dts
@@ -46,7 +46,7 @@ bluetooth {
};
&blsp1_uart3_on {
- rx {
+ rx-pins {
/delete-property/ bias-disable;
/*
* Configure a pull-up on 45 (RX). This is needed to
@@ -57,7 +57,7 @@ rx {
bias-pull-up;
};
- cts {
+ cts-pins {
/delete-property/ bias-disable;
/*
* Configure a pull-down on 47 (CTS) to match the pull
diff --git a/arch/arm64/boot/dts/qcom/msm8998-oneplus-cheeseburger.dts b/arch/arm64/boot/dts/qcom/msm8998-oneplus-cheeseburger.dts
index 122f6c25220e..b951f98d1b7b 100644
--- a/arch/arm64/boot/dts/qcom/msm8998-oneplus-cheeseburger.dts
+++ b/arch/arm64/boot/dts/qcom/msm8998-oneplus-cheeseburger.dts
@@ -33,11 +33,9 @@ button-backlight {
&pmi8998_gpio {
button_backlight_default: button-backlight-state {
- pinconf {
- pins = "gpio5";
- function = "gpio";
- bias-pull-down;
- qcom,drive-strength = <PMIC_GPIO_STRENGTH_NO>;
- };
+ pins = "gpio5";
+ function = "gpio";
+ bias-pull-down;
+ qcom,drive-strength = <PMIC_GPIO_STRENGTH_NO>;
};
};
diff --git a/arch/arm64/boot/dts/qcom/msm8998-oneplus-common.dtsi b/arch/arm64/boot/dts/qcom/msm8998-oneplus-common.dtsi
index 62bda23791bb..748de88d5d57 100644
--- a/arch/arm64/boot/dts/qcom/msm8998-oneplus-common.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8998-oneplus-common.dtsi
@@ -233,7 +233,7 @@ bluetooth {
};
&blsp1_uart3_on {
- rx {
+ rx-pins {
/delete-property/ bias-disable;
/*
* Configure a pull-up on 46 (RX). This is needed to
@@ -244,7 +244,7 @@ rx {
bias-pull-up;
};
- cts {
+ cts-pins {
/delete-property/ bias-disable;
/*
* Configure a pull-down on 47 (CTS) to match the pull
@@ -492,7 +492,7 @@ vreg_bob: bob {
&tlmm {
gpio-reserved-ranges = <0 4>, <81 4>;
- hall_sensor_default: hall-sensor-default {
+ hall_sensor_default: hall-sensor-default-state {
pins = "gpio124";
function = "gpio";
drive-strength = <2>;
@@ -500,28 +500,28 @@ hall_sensor_default: hall-sensor-default {
input-enable;
};
- ts_int_active: ts-int-active {
+ ts_int_active: ts-int-active-state {
pins = "gpio125";
function = "gpio";
drive-strength = <8>;
bias-pull-up;
};
- ts_reset_active: ts-reset-active {
+ ts_reset_active: ts-reset-active-state {
pins = "gpio89";
function = "gpio";
drive-strength = <8>;
bias-pull-up;
};
- nfc_int_active: nfc-int-active {
+ nfc_int_active: nfc-int-active-state {
pins = "gpio92";
function = "gpio";
drive-strength = <6>;
bias-pull-up;
};
- nfc_enable_active: nfc-enable-active {
+ nfc_enable_active: nfc-enable-active-state {
pins = "gpio12", "gpio116";
function = "gpio";
drive-strength = <6>;
diff --git a/arch/arm64/boot/dts/qcom/msm8998-sony-xperia-yoshino.dtsi b/arch/arm64/boot/dts/qcom/msm8998-sony-xperia-yoshino.dtsi
index d08639082247..440f2b2d2b2e 100644
--- a/arch/arm64/boot/dts/qcom/msm8998-sony-xperia-yoshino.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8998-sony-xperia-yoshino.dtsi
@@ -565,14 +565,14 @@ &sdhc2 {
&tlmm {
gpio-reserved-ranges = <0 4>, <81 4>;
- mdp_vsync_n: mdp-vsync-n {
+ mdp_vsync_n: mdp-vsync-n-state {
pins = "gpio10";
function = "mdp_vsync_a";
drive-strength = <2>;
bias-pull-down;
};
- nfc_ven: nfc-ven {
+ nfc_ven: nfc-ven-state {
pins = "gpio12";
function = "gpio";
bias-disable;
@@ -580,42 +580,42 @@ nfc_ven: nfc-ven {
output-low;
};
- msm_mclk0_default: msm-mclk0-active {
+ msm_mclk0_default: msm-mclk0-active-state {
pins = "gpio13";
function = "cam_mclk";
drive-strength = <2>;
bias-disable;
};
- msm_mclk1_default: msm-mclk1-active {
+ msm_mclk1_default: msm-mclk1-active-state {
pins = "gpio14";
function = "cam_mclk";
drive-strength = <2>;
bias-disable;
};
- cci0_default: cci0-default {
+ cci0_default: cci0-default-state {
pins = "gpio18", "gpio19";
function = "cci_i2c";
bias-disable;
drive-strength = <2>;
};
- cci1_default: cci1-default {
+ cci1_default: cci1-default-state {
pins = "gpio19", "gpio20";
function = "cci_i2c";
bias-disable;
drive-strength = <2>;
};
- cam0_vdig_default: cam0-vdig-default {
+ cam0_vdig_default: cam0-vdig-default-state {
pins = "gpio21";
function = "gpio";
bias-disable;
drive-strength = <2>;
};
- tof_int: tof-int {
+ tof_int: tof-int-state {
pins = "gpio22";
function = "gpio";
bias-pull-up;
@@ -623,28 +623,28 @@ tof_int: tof-int {
input-enable;
};
- cam1_vdig_default: cam1-vdig-default {
+ cam1_vdig_default: cam1-vdig-default-state {
pins = "gpio25";
function = "gpio";
bias-disable;
drive-strength = <2>;
};
- usb_extcon_active: usb-extcon-active {
+ usb_extcon_active: usb-extcon-active-state {
pins = "gpio38";
function = "gpio";
bias-disable;
drive-strength = <16>;
};
- tof_reset: tof-reset {
+ tof_reset: tof-reset-state {
pins = "gpio27";
function = "gpio";
bias-disable;
drive-strength = <2>;
};
- hall_sensor0_default: acc-cover-open {
+ hall_sensor0_default: acc-cover-open-state {
pins = "gpio124";
function = "gpio";
bias-disable;
@@ -652,14 +652,14 @@ hall_sensor0_default: acc-cover-open {
input-enable;
};
- ts_int_n: ts-int-n {
+ ts_int_n: ts-int-n-state {
pins = "gpio125";
function = "gpio";
drive-strength = <8>;
bias-pull-up;
};
- usb_vbus_active: usb-vbus-active {
+ usb_vbus_active: usb-vbus-active-state {
pins = "gpio128";
function = "gpio";
bias-disable;
@@ -667,7 +667,7 @@ usb_vbus_active: usb-vbus-active {
output-low;
};
- ts_vddio_en: ts-vddio-en-default {
+ ts_vddio_en: ts-vddio-en-default-state {
pins = "gpio133";
function = "gpio";
bias-disable;
diff --git a/arch/arm64/boot/dts/qcom/msm8998.dtsi b/arch/arm64/boot/dts/qcom/msm8998.dtsi
index 2c4acf227253..9650670eae05 100644
--- a/arch/arm64/boot/dts/qcom/msm8998.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8998.dtsi
@@ -1062,76 +1062,76 @@ tlmm: pinctrl@3400000 {
interrupt-controller;
#interrupt-cells = <2>;
- sdc2_on: sdc2-on {
- clk {
+ sdc2_on: sdc2-on-state {
+ clk-pins {
pins = "sdc2_clk";
drive-strength = <16>;
bias-disable;
};
- cmd {
+ cmd-pins {
pins = "sdc2_cmd";
drive-strength = <10>;
bias-pull-up;
};
- data {
+ data-pins {
pins = "sdc2_data";
drive-strength = <10>;
bias-pull-up;
};
};
- sdc2_off: sdc2-off {
- clk {
+ sdc2_off: sdc2-off-state {
+ clk-pins {
pins = "sdc2_clk";
drive-strength = <2>;
bias-disable;
};
- cmd {
+ cmd-pins {
pins = "sdc2_cmd";
drive-strength = <2>;
bias-pull-up;
};
- data {
+ data-pins {
pins = "sdc2_data";
drive-strength = <2>;
bias-pull-up;
};
};
- sdc2_cd: sdc2-cd {
+ sdc2_cd: sdc2-cd-state {
pins = "gpio95";
function = "gpio";
bias-pull-up;
drive-strength = <2>;
};
- blsp1_uart3_on: blsp1-uart3-on {
- tx {
+ blsp1_uart3_on: blsp1-uart3-on-state {
+ tx-pins {
pins = "gpio45";
function = "blsp_uart3_a";
drive-strength = <2>;
bias-disable;
};
- rx {
+ rx-pins {
pins = "gpio46";
function = "blsp_uart3_a";
drive-strength = <2>;
bias-disable;
};
- cts {
+ cts-pins {
pins = "gpio47";
function = "blsp_uart3_a";
drive-strength = <2>;
bias-disable;
};
- rfr {
+ rfr-pins {
pins = "gpio48";
function = "blsp_uart3_a";
drive-strength = <2>;
@@ -1139,168 +1139,168 @@ rfr {
};
};
- blsp1_i2c1_default: blsp1-i2c1-default {
+ blsp1_i2c1_default: blsp1-i2c1-default-state {
pins = "gpio2", "gpio3";
function = "blsp_i2c1";
drive-strength = <2>;
bias-disable;
};
- blsp1_i2c1_sleep: blsp1-i2c1-sleep {
+ blsp1_i2c1_sleep: blsp1-i2c1-sleep-state-state {
pins = "gpio2", "gpio3";
function = "blsp_i2c1";
drive-strength = <2>;
bias-pull-up;
};
- blsp1_i2c2_default: blsp1-i2c2-default {
+ blsp1_i2c2_default: blsp1-i2c2-default-state {
pins = "gpio32", "gpio33";
function = "blsp_i2c2";
drive-strength = <2>;
bias-disable;
};
- blsp1_i2c2_sleep: blsp1-i2c2-sleep {
+ blsp1_i2c2_sleep: blsp1-i2c2-sleep-state-state {
pins = "gpio32", "gpio33";
function = "blsp_i2c2";
drive-strength = <2>;
bias-pull-up;
};
- blsp1_i2c3_default: blsp1-i2c3-default {
+ blsp1_i2c3_default: blsp1-i2c3-default-state {
pins = "gpio47", "gpio48";
function = "blsp_i2c3";
drive-strength = <2>;
bias-disable;
};
- blsp1_i2c3_sleep: blsp1-i2c3-sleep {
+ blsp1_i2c3_sleep: blsp1-i2c3-sleep-state {
pins = "gpio47", "gpio48";
function = "blsp_i2c3";
drive-strength = <2>;
bias-pull-up;
};
- blsp1_i2c4_default: blsp1-i2c4-default {
+ blsp1_i2c4_default: blsp1-i2c4-default-state {
pins = "gpio10", "gpio11";
function = "blsp_i2c4";
drive-strength = <2>;
bias-disable;
};
- blsp1_i2c4_sleep: blsp1-i2c4-sleep {
+ blsp1_i2c4_sleep: blsp1-i2c4-sleep-state {
pins = "gpio10", "gpio11";
function = "blsp_i2c4";
drive-strength = <2>;
bias-pull-up;
};
- blsp1_i2c5_default: blsp1-i2c5-default {
+ blsp1_i2c5_default: blsp1-i2c5-default-state {
pins = "gpio87", "gpio88";
function = "blsp_i2c5";
drive-strength = <2>;
bias-disable;
};
- blsp1_i2c5_sleep: blsp1-i2c5-sleep {
+ blsp1_i2c5_sleep: blsp1-i2c5-sleep-state {
pins = "gpio87", "gpio88";
function = "blsp_i2c5";
drive-strength = <2>;
bias-pull-up;
};
- blsp1_i2c6_default: blsp1-i2c6-default {
+ blsp1_i2c6_default: blsp1-i2c6-default-state {
pins = "gpio43", "gpio44";
function = "blsp_i2c6";
drive-strength = <2>;
bias-disable;
};
- blsp1_i2c6_sleep: blsp1-i2c6-sleep {
+ blsp1_i2c6_sleep: blsp1-i2c6-sleep-state {
pins = "gpio43", "gpio44";
function = "blsp_i2c6";
drive-strength = <2>;
bias-pull-up;
};
/* 6 interfaces per QUP, BLSP2 indexes are numbered (n)+6 */
- blsp2_i2c1_default: blsp2-i2c1-default {
+ blsp2_i2c1_default: blsp2-i2c1-default-state {
pins = "gpio55", "gpio56";
function = "blsp_i2c7";
drive-strength = <2>;
bias-disable;
};
- blsp2_i2c1_sleep: blsp2-i2c1-sleep {
+ blsp2_i2c1_sleep: blsp2-i2c1-sleep-state {
pins = "gpio55", "gpio56";
function = "blsp_i2c7";
drive-strength = <2>;
bias-pull-up;
};
- blsp2_i2c2_default: blsp2-i2c2-default {
+ blsp2_i2c2_default: blsp2-i2c2-default-state {
pins = "gpio6", "gpio7";
function = "blsp_i2c8";
drive-strength = <2>;
bias-disable;
};
- blsp2_i2c2_sleep: blsp2-i2c2-sleep {
+ blsp2_i2c2_sleep: blsp2-i2c2-sleep-state {
pins = "gpio6", "gpio7";
function = "blsp_i2c8";
drive-strength = <2>;
bias-pull-up;
};
- blsp2_i2c3_default: blsp2-i2c3-default {
+ blsp2_i2c3_default: blsp2-i2c3-default-state {
pins = "gpio51", "gpio52";
function = "blsp_i2c9";
drive-strength = <2>;
bias-disable;
};
- blsp2_i2c3_sleep: blsp2-i2c3-sleep {
+ blsp2_i2c3_sleep: blsp2-i2c3-sleep-state {
pins = "gpio51", "gpio52";
function = "blsp_i2c9";
drive-strength = <2>;
bias-pull-up;
};
- blsp2_i2c4_default: blsp2-i2c4-default {
+ blsp2_i2c4_default: blsp2-i2c4-default-state {
pins = "gpio67", "gpio68";
function = "blsp_i2c10";
drive-strength = <2>;
bias-disable;
};
- blsp2_i2c4_sleep: blsp2-i2c4-sleep {
+ blsp2_i2c4_sleep: blsp2-i2c4-sleep-state {
pins = "gpio67", "gpio68";
function = "blsp_i2c10";
drive-strength = <2>;
bias-pull-up;
};
- blsp2_i2c5_default: blsp2-i2c5-default {
+ blsp2_i2c5_default: blsp2-i2c5-default-state {
pins = "gpio60", "gpio61";
function = "blsp_i2c11";
drive-strength = <2>;
bias-disable;
};
- blsp2_i2c5_sleep: blsp2-i2c5-sleep {
+ blsp2_i2c5_sleep: blsp2-i2c5-sleep-state {
pins = "gpio60", "gpio61";
function = "blsp_i2c11";
drive-strength = <2>;
bias-pull-up;
};
- blsp2_i2c6_default: blsp2-i2c6-default {
+ blsp2_i2c6_default: blsp2-i2c6-default-state {
pins = "gpio83", "gpio84";
function = "blsp_i2c12";
drive-strength = <2>;
bias-disable;
};
- blsp2_i2c6_sleep: blsp2-i2c6-sleep {
+ blsp2_i2c6_sleep: blsp2-i2c6-sleep-state {
pins = "gpio83", "gpio84";
function = "blsp_i2c12";
drive-strength = <2>;
--
2.34.1
