On the T208X SoCs, MAC1 and MAC2 support XGMII. Add some new MAC dtsi
fragments, and mark the QMAN ports as 10G.
Fixes: da414bb923d9 ("powerpc/mpc85xx: Add FSL QorIQ DPAA FMan support to the SoC device tree(s)")
Signed-off-by: Sean Anderson <sean.anderson@xxxxxxxx>
---
(no changes since v4)
Changes in v4:
- New
.../boot/dts/fsl/qoriq-fman3-0-10g-2.dtsi | 44 +++++++++++++++++++
.../boot/dts/fsl/qoriq-fman3-0-10g-3.dtsi | 44 +++++++++++++++++++
arch/powerpc/boot/dts/fsl/t2081si-post.dtsi | 4 +-
3 files changed, 90 insertions(+), 2 deletions(-)
create mode 100644 arch/powerpc/boot/dts/fsl/qoriq-fman3-0-10g-2.dtsi
create mode 100644 arch/powerpc/boot/dts/fsl/qoriq-fman3-0-10g-3.dtsi
diff --git a/arch/powerpc/boot/dts/fsl/qoriq-fman3-0-10g-2.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-fman3-0-10g-2.dtsi
new file mode 100644
index 000000000000..437dab3fc017
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/qoriq-fman3-0-10g-2.dtsi
@@ -0,0 +1,44 @@
+// SPDX-License-Identifier: BSD-3-Clause OR GPL-2.0-or-later
+/*
+ * QorIQ FMan v3 10g port #2 device tree stub [ controller @ offset 0x400000 ]
+ *
+ * Copyright 2022 Sean Anderson <sean.anderson@xxxxxxxx>
+ * Copyright 2012 - 2015 Freescale Semiconductor Inc.
+ */
+
+fman@400000 {
+ fman0_rx_0x08: port@88000 {
+ cell-index = <0x8>;
+ compatible = "fsl,fman-v3-port-rx";
+ reg = <0x88000 0x1000>;
+ fsl,fman-10g-port;
+ };
+
+ fman0_tx_0x28: port@a8000 {
+ cell-index = <0x28>;
+ compatible = "fsl,fman-v3-port-tx";
+ reg = <0xa8000 0x1000>;
+ fsl,fman-10g-port;
+ };
+
+ ethernet@e0000 {
+ cell-index = <0>;
+ compatible = "fsl,fman-memac";
+ reg = <0xe0000 0x1000>;
+ fsl,fman-ports = <&fman0_rx_0x08 &fman0_tx_0x28>;
+ ptp-timer = <&ptp_timer0>;
+ pcsphy-handle = <&pcsphy0>;
+ };
+
+ mdio@e1000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,fman-memac-mdio", "fsl,fman-xmdio";
+ reg = <0xe1000 0x1000>;
+ fsl,erratum-a011043; /* must ignore read errors */
+
+ pcsphy0: ethernet-phy@0 {
+ reg = <0x0>;
+ };
+ };
+};
diff --git a/arch/powerpc/boot/dts/fsl/qoriq-fman3-0-10g-3.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-fman3-0-10g-3.dtsi
new file mode 100644
index 000000000000..ad116b17850a
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/qoriq-fman3-0-10g-3.dtsi
@@ -0,0 +1,44 @@
+// SPDX-License-Identifier: BSD-3-Clause OR GPL-2.0-or-later
+/*
+ * QorIQ FMan v3 10g port #3 device tree stub [ controller @ offset 0x400000 ]
+ *
+ * Copyright 2022 Sean Anderson <sean.anderson@xxxxxxxx>
+ * Copyright 2012 - 2015 Freescale Semiconductor Inc.
+ */
+
+fman@400000 {
+ fman0_rx_0x09: port@89000 {
+ cell-index = <0x9>;
+ compatible = "fsl,fman-v3-port-rx";
+ reg = <0x89000 0x1000>;
+ fsl,fman-10g-port;
+ };
+
+ fman0_tx_0x29: port@a9000 {
+ cell-index = <0x29>;
+ compatible = "fsl,fman-v3-port-tx";
+ reg = <0xa9000 0x1000>;
+ fsl,fman-10g-port;
+ };
+
+ ethernet@e2000 {
+ cell-index = <1>;
+ compatible = "fsl,fman-memac";
+ reg = <0xe2000 0x1000>;
+ fsl,fman-ports = <&fman0_rx_0x09 &fman0_tx_0x29>;
+ ptp-timer = <&ptp_timer0>;
+ pcsphy-handle = <&pcsphy1>;
+ };
+
+ mdio@e3000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,fman-memac-mdio", "fsl,fman-xmdio";
+ reg = <0xe3000 0x1000>;
+ fsl,erratum-a011043; /* must ignore read errors */
+
+ pcsphy1: ethernet-phy@0 {
+ reg = <0x0>;
+ };
+ };
+};
diff --git a/arch/powerpc/boot/dts/fsl/t2081si-post.dtsi b/arch/powerpc/boot/dts/fsl/t2081si-post.dtsi
index ecbb447920bc..74e17e134387 100644
--- a/arch/powerpc/boot/dts/fsl/t2081si-post.dtsi
+++ b/arch/powerpc/boot/dts/fsl/t2081si-post.dtsi
@@ -609,8 +609,8 @@ usb1: usb@211000 {
/include/ "qoriq-bman1.dtsi"
/include/ "qoriq-fman3-0.dtsi"
-/include/ "qoriq-fman3-0-1g-0.dtsi"
-/include/ "qoriq-fman3-0-1g-1.dtsi"
+/include/ "qoriq-fman3-0-10g-2.dtsi"
+/include/ "qoriq-fman3-0-10g-3.dtsi"
/include/ "qoriq-fman3-0-1g-2.dtsi"
/include/ "qoriq-fman3-0-1g-3.dtsi"
/include/ "qoriq-fman3-0-1g-4.dtsi"
--
2.35.1.1320.gc452695387.dirty
