Re: [PATCH v2 4/4] clk: Add Ingenic JZ4755 CGU driver

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



пн, 17 окт. 2022 г. в 20:24, Paul Cercueil <paul@xxxxxxxxxxxxxxx>:
>
>
>
> Le lun., oct. 17 2022 at 20:10:56 +0300, Siarhei Volkau
> <lis8215@xxxxxxxxx> a écrit :
> > пн, 17 окт. 2022 г. в 12:24, Paul Cercueil
> > <paul@xxxxxxxxxxxxxxx>:
> >
> >>  > +     [JZ4755_CLK_AIC] = {
> >>  > +             "aic", CGU_CLK_GATE,
> >>  > +             .parents = { JZ4755_CLK_I2S, -1, -1, -1 },
> >>
> >>  Wrong parent here, should be JZ4755_CLK_EXT_HALF.
> >
> > I don't  agree, see Figure 20-13 in the JZ4755 PM.
>
> 20-13 describes the I2S clock, no?

See 20.4.9 Serial Audio Clocks and Sampling Frequencies.
It stated that: "For internal CODEC ... CODEC needs a 12MHz
clock from CPM called SYS_CLK ...", but SYS_CLK is described
only in the I2S Controller section. I assume it is the same clock.

>
> AIC clock's parent is EXT/2 according to the diagram in 8.2.2.
>

It's a bit cryptic manual, who knows how it's done in the HW.
I observed that codec runs on a desired sample rate only when PLL
equals 432 or 216 MHz, but SYS_CLK is definitely configured to be
12MHz - from EXTCLK. On other PLL frequencies it is lower by
2-4% than expected. That isn't observed on JZ4725B.

> >>  Well it would be good to know...
> >
> > Indeed, I will try to figure it out.
>
> Cheers,
> -Paul
>
>




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux