From: Dylan Van Assche <me@xxxxxxxxxxxxxxxxx>
Add serial1 alias, firmware name and use 4 pin UART pinmux.
Signed-off-by: Dylan Van Assche <me@xxxxxxxxxxxxxxxxx>
Signed-off-by: Caleb Connolly <caleb@xxxxxxxxxxxxx>
---
arch/arm64/boot/dts/qcom/sdm845-shift-axolotl.dts | 9 +++++++++
1 file changed, 9 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/sdm845-shift-axolotl.dts b/arch/arm64/boot/dts/qcom/sdm845-shift-axolotl.dts
index 83261c9bb4f2..bb77ccfdc68c 100644
--- a/arch/arm64/boot/dts/qcom/sdm845-shift-axolotl.dts
+++ b/arch/arm64/boot/dts/qcom/sdm845-shift-axolotl.dts
@@ -23,6 +23,7 @@ / {
aliases {
display0 = &framebuffer0;
serial0 = &uart9;
+ serial1 = &uart6;
};
chosen {
@@ -693,9 +694,17 @@ config {
&uart6 {
status = "okay";
+ pinctrl-0 = <&qup_uart6_4pin>;
+
bluetooth {
compatible = "qcom,wcn3990-bt";
+ /*
+ * This path is relative to the qca/
+ * subdir under lib/firmware.
+ */
+ firmware-name = "axolotl/crnv21.bin";
+
vddio-supply = <&vreg_s4a_1p8>;
vddxo-supply = <&vreg_l7a_1p8>;
vddrf-supply = <&vreg_l17a_1p3>;
--
2.38.0
