The TLMM pin controller follows generic pin-controller bindings, so
should have subnodes with '-state' and '-pins'. Otherwise the subnodes
(level one and two) are not properly matched. This method also unifies
the bindings with other Qualcomm TLMM and LPASS pinctrl bindings.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
Reviewed-by: Bjorn Andersson <andersson@xxxxxxxxxx>
Reviewed-by: Rob Herring <robh@xxxxxxxxxx>
---
.../bindings/pinctrl/qcom,qcm2290-pinctrl.yaml | 9 +++++----
1 file changed, 5 insertions(+), 4 deletions(-)
diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,qcm2290-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,qcm2290-pinctrl.yaml
index 3f4f1c0360b5..5324b61eb4f7 100644
--- a/Documentation/devicetree/bindings/pinctrl/qcom,qcm2290-pinctrl.yaml
+++ b/Documentation/devicetree/bindings/pinctrl/qcom,qcm2290-pinctrl.yaml
@@ -50,8 +50,9 @@ patternProperties:
oneOf:
- $ref: "#/$defs/qcom-qcm2290-tlmm-state"
- patternProperties:
- ".*":
+ "-pins$":
$ref: "#/$defs/qcom-qcm2290-tlmm-state"
+ additionalProperties: false
'$defs':
qcom-qcm2290-tlmm-state:
@@ -146,19 +147,19 @@ examples:
gpio-ranges = <&tlmm 0 0 127>;
sdc2_on_state: sdc2-on-state {
- clk {
+ clk-pins {
pins = "sdc2_clk";
bias-disable;
drive-strength = <16>;
};
- cmd {
+ cmd-pins {
pins = "sdc2_cmd";
bias-pull-up;
drive-strength = <10>;
};
- data {
+ data-pins {
pins = "sdc2_data";
bias-pull-up;
drive-strength = <10>;
--
2.34.1
