Use the new qup_uart6_4pin configuration in sd845.dtsi and fix alias
name.
Signed-off-by: Caleb Connolly <caleb@xxxxxxxxxxxxx>
---
arch/arm64/boot/dts/qcom/sdm845-db845c.dts | 27 +++-------------------
1 file changed, 3 insertions(+), 24 deletions(-)
diff --git a/arch/arm64/boot/dts/qcom/sdm845-db845c.dts b/arch/arm64/boot/dts/qcom/sdm845-db845c.dts
index c6e2c571b452..215dd8098a44 100644
--- a/arch/arm64/boot/dts/qcom/sdm845-db845c.dts
+++ b/arch/arm64/boot/dts/qcom/sdm845-db845c.dts
@@ -22,7 +22,7 @@ / {
aliases {
serial0 = &uart9;
- hsuart0 = &uart6;
+ serial1 = &uart6;
};
chosen {
@@ -986,6 +986,8 @@ &uart3 {
&uart6 {
status = "okay";
+ pinctrl-0 = <&qup_uart6_4pin>;
+
bluetooth {
compatible = "qcom,wcn3990-bt";
@@ -1141,29 +1143,6 @@ pinconf {
};
};
-&qup_uart6_default {
- pinmux {
- pins = "gpio45", "gpio46", "gpio47", "gpio48";
- function = "qup6";
- };
-
- cts {
- pins = "gpio45";
- bias-disable;
- };
-
- rts-tx {
- pins = "gpio46", "gpio47";
- drive-strength = <2>;
- bias-disable;
- };
-
- rx {
- pins = "gpio48";
- bias-pull-up;
- };
-};
-
&qup_uart9_default {
pinconf-tx {
pins = "gpio4";
--
2.38.0
