Rename fixed-clock oscillators to oscillator-26m and oscillator-32k
and remove the unit address to fix the unit_address_vs_reg warning;
fix the unit address for interrupt and intpol controllers by
removing a leading zero in their unit address.
This commit fixes the following warnings:
(unit_address_vs_reg): /oscillator@0: node has a unit name, but
no reg or ranges property
(unit_address_vs_reg): /oscillator@1: node has a unit name, but
no reg or ranges property
(simple_bus_reg): /soc/interrupt-controller@0c000000: simple-bus
unit address format error, expected "c000000"
(simple_bus_reg): /soc/intpol-controller@0c53a650: simple-bus
unit address format error, expected "c53a650"
Fixes: 4c7a6260775d ("arm64: dts: add dts nodes for MT6779")
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@xxxxxxxxxxxxx>
---
arch/arm64/boot/dts/mediatek/mt6779.dtsi | 8 ++++----
1 file changed, 4 insertions(+), 4 deletions(-)
diff --git a/arch/arm64/boot/dts/mediatek/mt6779.dtsi b/arch/arm64/boot/dts/mediatek/mt6779.dtsi
index 9bdf5145966c..dde9ce137b4f 100644
--- a/arch/arm64/boot/dts/mediatek/mt6779.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt6779.dtsi
@@ -88,14 +88,14 @@ pmu {
interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_LOW 0>;
};
- clk26m: oscillator@0 {
+ clk26m: oscillator-26m {
compatible = "fixed-clock";
#clock-cells = <0>;
clock-frequency = <26000000>;
clock-output-names = "clk26m";
};
- clk32k: oscillator@1 {
+ clk32k: oscillator-32k {
compatible = "fixed-clock";
#clock-cells = <0>;
clock-frequency = <32768>;
@@ -117,7 +117,7 @@ soc {
compatible = "simple-bus";
ranges;
- gic: interrupt-controller@0c000000 {
+ gic: interrupt-controller@c000000 {
compatible = "arm,gic-v3";
#interrupt-cells = <4>;
interrupt-parent = <&gic>;
@@ -138,7 +138,7 @@ ppi_cluster1: interrupt-partition-1 {
};
- sysirq: intpol-controller@0c53a650 {
+ sysirq: intpol-controller@c53a650 {
compatible = "mediatek,mt6779-sysirq",
"mediatek,mt6577-sysirq";
interrupt-controller;
--
2.37.2
