Re: [PATCH 1/2] arm64: dts: qcom: sc7180: align TLMM pin configuration with DT schema

[Doug Anderson <dianders@xxxxxxxxxxxx>]

Hi,

On Thu, Oct 13, 2022 at 7:59 AM Krzysztof Kozlowski
<krzysztof.kozlowski@xxxxxxxxxx> wrote:
>
> >> diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-homestar.dtsi b/arch/arm64/boot/dts/qcom/sc7180-trogdor-homestar.dtsi
> >> index 1bd6c7dcd9e9..c66568a882b3 100644
> >> --- a/arch/arm64/boot/dts/qcom/sc7180-trogdor-homestar.dtsi
> >> +++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-homestar.dtsi
> >> @@ -180,30 +180,19 @@ &wifi {
> >>  /* PINCTRL - modifications to sc7180-trogdor.dtsi */
> >>
> >>  &en_pp3300_dx_edp {
> >> -       pinmux {
> >> -               pins = "gpio67";
> >> -       };
> >> -
> >> -       pinconf {
> >> -               pins = "gpio67";
> >> -       };
> >> +       pins = "gpio67";
> >>  };
> >>
> >>  &sec_mi2s_active{
> >> -       pinmux {
> >> -               pins = "gpio49", "gpio50", "gpio51", "gpio52";
> >> -               function = "mi2s_1";
> >> -       };
> >> +       pins = "gpio49", "gpio50", "gpio51", "gpio52";
> >
> > Looks like the point of the homestar override is to add an extra pin
> > (gpio52) but it forgot to update the list in the "pinconf" as well so
> > gpio52 wasn't getting a drive strength and bias set. Your patch
> > has the side effect of fixing this. That looks right to me (match
> > GPIO51) given that the name of GPIO51 is AMP_DIN and GPIO52 AMP_DIN2.
>
> I miss here something... There was no pinconf in
> sc7180.dtsi/sc7180-trogdor-homestar.dtsi/homestar.dts
>
> Where do you see the drive strength and bias set for the gpio49-51?

Let's see. I think you're missing "sc7180-trogdor.dtsi". So looking at
mainline today without applying your patches.

In sc7180.dtsi:

  sec_mi2s_active: sec-mi2s-active {
    pinmux {
      pins = "gpio49", "gpio50", "gpio51";
      function = "mi2s_1";
    };
  };

Then in sc7180-trogdor.dtsi:

  &sec_mi2s_active {
    pinconf {
      pins = "gpio49", "gpio50", "gpio51";
      drive-strength = <2>;
      bias-pull-down;
    };
  };

Then in sc7180-trogdor-homestar.dtsi:

  &sec_mi2s_active{
    pinmux {
      pins = "gpio49", "gpio50", "gpio51", "gpio52";
      function = "mi2s_1";
    };
  };

The end result of those snippets ought to be something where, on
homestar, the pinmux gets set to "mi2s_1" for gpio49 - 52 but the
pinconf only gets set for gpio49 - 51 (missing 52).

Your patch fixes this oversight because it combines the muxing and
configuration into one node.

-Doug