Add missing ti,j721e-system-controller to bus defines in mcu/wakeup
domains to avoid the following similar warnings from dt-schema checks:
arch/arm64/boot/dts/ti/k3-j721s2-common-proc-board.dtb: syscon@40f00000: compatible: ['syscon', 'simple-mfd'] is too short'
Signed-off-by: Matt Ranostay <mranostay@xxxxxx>
---
arch/arm64/boot/dts/ti/k3-j7200-mcu-wakeup.dtsi | 2 +-
arch/arm64/boot/dts/ti/k3-j721e-mcu-wakeup.dtsi | 2 +-
arch/arm64/boot/dts/ti/k3-j721s2-mcu-wakeup.dtsi | 2 +-
3 files changed, 3 insertions(+), 3 deletions(-)
diff --git a/arch/arm64/boot/dts/ti/k3-j7200-mcu-wakeup.dtsi b/arch/arm64/boot/dts/ti/k3-j7200-mcu-wakeup.dtsi
index e5be78a58682..b5c666f98ba4 100644
--- a/arch/arm64/boot/dts/ti/k3-j7200-mcu-wakeup.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-j7200-mcu-wakeup.dtsi
@@ -35,7 +35,7 @@ k3_reset: reset-controller {
};
mcu_conf: syscon@40f00000 {
- compatible = "syscon", "simple-mfd";
+ compatible = "ti,j721e-system-controller", "syscon", "simple-mfd";
reg = <0x00 0x40f00000 0x00 0x20000>;
#address-cells = <1>;
#size-cells = <1>;
diff --git a/arch/arm64/boot/dts/ti/k3-j721e-mcu-wakeup.dtsi b/arch/arm64/boot/dts/ti/k3-j721e-mcu-wakeup.dtsi
index df08724bbf1c..5d9ec221fa34 100644
--- a/arch/arm64/boot/dts/ti/k3-j721e-mcu-wakeup.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-j721e-mcu-wakeup.dtsi
@@ -35,7 +35,7 @@ k3_reset: reset-controller {
};
mcu_conf: syscon@40f00000 {
- compatible = "syscon", "simple-mfd";
+ compatible = "ti,j721e-system-controller", "syscon", "simple-mfd";
reg = <0x0 0x40f00000 0x0 0x20000>;
#address-cells = <1>;
#size-cells = <1>;
diff --git a/arch/arm64/boot/dts/ti/k3-j721s2-mcu-wakeup.dtsi b/arch/arm64/boot/dts/ti/k3-j721s2-mcu-wakeup.dtsi
index 4d1bfabd1313..3845d162d3c6 100644
--- a/arch/arm64/boot/dts/ti/k3-j721s2-mcu-wakeup.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-j721s2-mcu-wakeup.dtsi
@@ -69,7 +69,7 @@ wkup_gpio_intr: interrupt-controller@42200000 {
};
mcu_conf: syscon@40f00000 {
- compatible = "syscon", "simple-mfd";
+ compatible = "ti,j721e-system-controller", "syscon", "simple-mfd";
reg = <0x0 0x40f00000 0x0 0x20000>;
#address-cells = <1>;
#size-cells = <1>;
--
2.38.0.rc0.52.gdda7228a83
