The GPIO55 is part of SPI10 pins, not its chip-select. Probably the
intention was to use one of dedicated chip-select GPIOs: 47 or 67.
GPIO47 is used for UART2, so choose GPIO67.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
---
Not tested on hardware.
---
arch/arm64/boot/dts/qcom/msm8994.dtsi | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm64/boot/dts/qcom/msm8994.dtsi b/arch/arm64/boot/dts/qcom/msm8994.dtsi
index ded5b7ceeaf9..7a582a5fe3a8 100644
--- a/arch/arm64/boot/dts/qcom/msm8994.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8994.dtsi
@@ -897,7 +897,7 @@ default {
};
cs {
function = "gpio";
- pins = "gpio55";
+ pins = "gpio67";
drive-strength = <2>;
bias-disable;
};
--
2.34.1
