[PATCH] ASoC: qcom: lpass-cpu: mark HDMI TX registers as volatile

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



From: Srinivasa Rao Mandadapu <srivasam@xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx>

Update HDMI volatile registers list as DMA, Channel Selection registers
, vbit control registers are being reflected by hardware DP port
disconnection.
This update is required to fix no display and no sound issue
observed after reconnecting TAMA/SANWA DP cables.
Once DP cable is unplugged, DMA control registers are being reset by
hardware, however at second plugin, new dma control values does not
updated to the dma hardware registers since new register value and
cached values at the time of first plugin are same.

Signed-off-by: Srinivasa Rao Mandadapu <srivasam@xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx>
---
 sound/soc/qcom/lpass-cpu.c | 8 ++++++++
 1 file changed, 8 insertions(+)

diff --git a/sound/soc/qcom/lpass-cpu.c b/sound/soc/qcom/lpass-cpu.c
index 8a56f38..99a3b44 100644
--- a/sound/soc/qcom/lpass-cpu.c
+++ b/sound/soc/qcom/lpass-cpu.c
@@ -782,10 +782,18 @@ static bool lpass_hdmi_regmap_volatile(struct device *dev, unsigned int reg)
 		return true;
 	if (reg == LPASS_HDMI_TX_LEGACY_ADDR(v))
 		return true;
+	if (reg == LPASS_HDMI_TX_VBIT_CTL_ADDR(v))
+		return true;
 
 	for (i = 0; i < v->hdmi_rdma_channels; ++i) {
 		if (reg == LPAIF_HDMI_RDMACURR_REG(v, i))
 			return true;
+		if (reg == LPASS_HDMI_TX_DMA_ADDR(v, i))
+			return true;
+		if (reg == LPASS_HDMI_TX_CH_LSB_ADDR(v, i))
+			return true;
+		if (reg == LPASS_HDMI_TX_CH_MSB_ADDR(v, i))
+			return true;
 	}
 	return false;
 }
-- 
2.7.4




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux