On 12/10/2022 03:44, Rajat Khandelwal wrote:
> The datasheet states that the slave address for the device is 0x20
> when the pins A0 and A1 are ground. The DT binding has been using
> 0x10 as the value and I think it should be 0x20 as per datasheet.
>
> Signed-off-by: Rajat Khandelwal <rajat.khandelwal@xxxxxxxxxxxxxxx>
> ---
>
> v2:
> 1. Subject prefix added
> 2. DT bindings validated
No, still wrong. Nothing was validated.
>
> Documentation/devicetree/bindings/iio/dac/maxim,ds4424.yaml | 2 +-
> 1 file changed, 1 insertion(+), 1 deletion(-)
>
> diff --git a/Documentation/devicetree/bindings/iio/dac/maxim,ds4424.yaml b/Documentation/devicetree/bindings/iio/dac/maxim,ds4424.yaml
> index 264fa7c5fe3a..1955b1a97cd6 100644
> --- a/Documentation/devicetree/bindings/iio/dac/maxim,ds4424.yaml
> +++ b/Documentation/devicetree/bindings/iio/dac/maxim,ds4424.yaml
> @@ -38,7 +38,7 @@ examples:
>
> dac@10 {
> compatible = "maxim,ds4424";
> - reg = <0x10>; /* When A0, A1 pins are ground */
> + reg = <0x20>; /* When A0, A1 pins are ground */
Nothing improved here.
Best regards,
Krzysztof
