Hi,
Changes since v1
================
1. Add patch 1/4 and 3/4.
2. Patch 2/4: Extend existing set_suspend_disable (for bucks) with
LDO support. Implement set_suspend_enable. Suggested by Javier.
3. Patch 4/4: Add regulator suspend properties only to regulators
actually supporting this. Other regulators, not implementing
suspend enable/disable, will warn ("VCC_1.8V_IO: No configuration").
4. Patch 4/4: In suspend enable VHSIC_1.0V and VHSIC_1.8V regulators.
Suggested by Chanwoo Choi.
Description
===========
This patchset makes use of Javier Martinez Cainllas changes [1].
It allows disabling some of the regulators during suspend to RAM.
Javier's patchset is necessary only to test it.
[1] [PATCH v3 0/2] ARM: EXYNOS: Call regulator suspend prepare/finish
https://lkml.org/lkml/2014/10/20/545
Best regards,
Krzysztof
Krzysztof Kozlowski (4):
regulator: max77686: Replace hard-coded opmode values with defines
regulator: max77686: Implement suspend disable for some LDOs
mfd/regulator: dt-bindings: max77686: Document regulators off in
suspend
ARM: dts: exynos4412-trats: Add suspend configuration for max77686
regulators
Documentation/devicetree/bindings/mfd/max77686.txt | 6 ++
arch/arm/boot/dts/exynos4412-trats2.dts | 72 +++++++++++++---------
drivers/regulator/max77686.c | 58 +++++++++++++----
3 files changed, 94 insertions(+), 42 deletions(-)
--
1.9.1
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
