There is no "bias-no-pull" property. Assume intentions were disabling
bias.
Fixes: 79e7739f7b87 ("arm64: dts: qcom: sdm845-cheza: add initial cheza dt")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
Reviewed-by: Douglas Anderson <dianders@xxxxxxxxxxxx>
---
Changes since v1:
1. Drop cc-stable.
2. Add tags.
Not tested on hardware.
---
arch/arm64/boot/dts/qcom/sdm845-cheza.dtsi | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/arch/arm64/boot/dts/qcom/sdm845-cheza.dtsi b/arch/arm64/boot/dts/qcom/sdm845-cheza.dtsi
index b5eb8f7eca1d..b5f11fbcc300 100644
--- a/arch/arm64/boot/dts/qcom/sdm845-cheza.dtsi
+++ b/arch/arm64/boot/dts/qcom/sdm845-cheza.dtsi
@@ -1436,7 +1436,7 @@ ap_suspend_l_assert: ap_suspend_l_assert {
config {
pins = "gpio126";
function = "gpio";
- bias-no-pull;
+ bias-disable;
drive-strength = <2>;
output-low;
};
@@ -1446,7 +1446,7 @@ ap_suspend_l_deassert: ap_suspend_l_deassert {
config {
pins = "gpio126";
function = "gpio";
- bias-no-pull;
+ bias-disable;
drive-strength = <2>;
output-high;
};
--
2.34.1
