Adding device tree entry for CPSW to make it work in Dual EMAC mode. These patches were tested with DRA7 hwmod patches on top of linux-next. Patches are tested on top of Nishanth's PM tree for v3.17 [1] and pushed my tree to [2]. Did a boot test with CPSW and ping test with suspend/resume, the boot logs on DRA7xx EVM are posted at [3] [1] git://github.com/nmenon/linux-2.6-playground.git testing/v3.17/cpu-idle-suspend-dra7-omap5-framework [2] git://git.ti.com/~mugunthanvnm/ti-linux-kernel/linux.git v3.17/dra7-evm-cpsw-v3 [3] http://pastebin.ubuntu.com/8613072/ Changes from v2: * Changed pinctrl comments to hold mode0-name.mode-selected-name * Changes slave numbers in the pinctrl comments * Added cpsw and cpts clocks Changes from initial version: * Dropped patch for pinoff states * Changed pinoff state to mode15 Mugunthan V N (2): ARM: dts: dra7: Add CPSW and MDIO module nodes for dra7 ARM: dts: dra7-evm: Enable CPSW and MDIO for dra7xx EVM arch/arm/boot/dts/dra7-evm.dts | 106 +++++++++++++++++++++++++++++++++++++++++ arch/arm/boot/dts/dra7.dtsi | 61 ++++++++++++++++++++++++ 2 files changed, 167 insertions(+) -- 2.1.2.484.g13da0fc -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
