[PATCH v1 2/3] arm64: dts: librem5-devkit: Make LED use PWM

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



We can use PWM instead of just GPIO allowing us to control brightness.

Signed-off-by: Guido Günther <agx@xxxxxxxxxxx>
---
 .../dts/freescale/imx8mq-librem5-devkit.dts    | 18 +++++++++++-------
 1 file changed, 11 insertions(+), 7 deletions(-)

diff --git a/arch/arm64/boot/dts/freescale/imx8mq-librem5-devkit.dts b/arch/arm64/boot/dts/freescale/imx8mq-librem5-devkit.dts
index 6445c6b90b5b..7e4b6d65fd89 100644
--- a/arch/arm64/boot/dts/freescale/imx8mq-librem5-devkit.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mq-librem5-devkit.dts
@@ -61,14 +61,12 @@ button-3 {
 	};
 
 	leds {
-		compatible = "gpio-leds";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_gpio_leds>;
+		compatible = "pwm-leds";
 
 		led1 {
 			label = "LED 1";
-			gpios = <&gpio1 13 GPIO_ACTIVE_HIGH>;
-			default-state = "off";
+			max-brightness = <248>;
+			pwms = <&pwm2 0 50000 0>;
 		};
 	};
 
@@ -615,9 +613,9 @@ MX8MQ_IOMUXC_GPIO1_IO05_GPIO1_IO5	0x19  /* TOUCH RST */
 		>;
 	};
 
-	pinctrl_gpio_leds: gpioledgrp {
+	pinctrl_pwm_led: pwmledgrp {
 		fsl,pins = <
-			MX8MQ_IOMUXC_GPIO1_IO13_GPIO1_IO13	0x16
+			MX8MQ_IOMUXC_GPIO1_IO13_PWM2_OUT	0x16
 		>;
 	};
 
@@ -920,6 +918,12 @@ &pwm1 {
 	status = "okay";
 };
 
+&pwm2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm_led>;
+	status = "okay";
+};
+
 &snvs_pwrkey {
 	status = "okay";
 };
-- 
2.35.1




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux