When the Felix driver would probe the ports and verify functionality, it
would fail if it hit single port mode that wasn't supported by the driver.
The initial case for the VSC7512 driver will have physical ports that
exist, but aren't supported by the driver implementation. Add the
OCELOT_PORT_MODE_NONE macro to handle this scenario, and allow the Felix
driver to continue with all the ports that are currently functional.
Signed-off-by: Colin Foster <colin.foster@xxxxxxxxxxxxxxxx>
---
v4
* New patch
---
drivers/net/dsa/ocelot/felix.c | 11 ++++++++---
drivers/net/dsa/ocelot/felix.h | 1 +
2 files changed, 9 insertions(+), 3 deletions(-)
diff --git a/drivers/net/dsa/ocelot/felix.c b/drivers/net/dsa/ocelot/felix.c
index fb0a0f7e42ac..70c3e4e203c2 100644
--- a/drivers/net/dsa/ocelot/felix.c
+++ b/drivers/net/dsa/ocelot/felix.c
@@ -1283,10 +1283,15 @@ static int felix_parse_ports_node(struct felix *felix,
err = felix_validate_phy_mode(felix, port, phy_mode);
if (err < 0) {
- dev_err(dev, "Unsupported PHY mode %s on port %d\n",
- phy_modes(phy_mode), port);
+ dev_info(dev, "Unsupported PHY mode %s on port %d\n",
+ phy_modes(phy_mode), port);
of_node_put(child);
- return err;
+
+ /* Leave port_phy_modes[port] = 0, which is also
+ * PHY_INTERFACE_MODE_NA. This will perform a
+ * best-effort to bring up as many ports as possible.
+ */
+ continue;
}
port_phy_modes[port] = phy_mode;
diff --git a/drivers/net/dsa/ocelot/felix.h b/drivers/net/dsa/ocelot/felix.h
index e6b7021036c2..90e04df0276a 100644
--- a/drivers/net/dsa/ocelot/felix.h
+++ b/drivers/net/dsa/ocelot/felix.h
@@ -7,6 +7,7 @@
#define ocelot_to_felix(o) container_of((o), struct felix, ocelot)
#define FELIX_MAC_QUIRKS OCELOT_QUIRK_PCS_PERFORMS_RATE_ADAPTATION
+#define OCELOT_PORT_MODE_NONE 0
#define OCELOT_PORT_MODE_INTERNAL BIT(0)
#define OCELOT_PORT_MODE_SGMII BIT(1)
#define OCELOT_PORT_MODE_QSGMII BIT(2)
--
2.25.1
