phylink_generic_validate() requires that mac_capabilities is correctly
populated. While no existing felix drivers have used
phylink_generic_validate(), the ocelot_ext.c driver will. Populate this
element so the use of existing functions is possible.
Signed-off-by: Colin Foster <colin.foster@xxxxxxxxxxxxxxxx>
---
v3-v4
* No change
v2
* Updated commit message to indicate "no existing felix drivers"
instead of "no existing drivers"
v1 from previous RFC:
* New patch
---
drivers/net/dsa/ocelot/felix.c | 3 +++
1 file changed, 3 insertions(+)
diff --git a/drivers/net/dsa/ocelot/felix.c b/drivers/net/dsa/ocelot/felix.c
index d56f6f67f648..1d938675bd3a 100644
--- a/drivers/net/dsa/ocelot/felix.c
+++ b/drivers/net/dsa/ocelot/felix.c
@@ -1050,6 +1050,9 @@ static void felix_phylink_get_caps(struct dsa_switch *ds, int port,
__set_bit(ocelot->ports[port]->phy_mode,
config->supported_interfaces);
+
+ config->mac_capabilities = MAC_SYM_PAUSE | MAC_ASYM_PAUSE | MAC_10 |
+ MAC_100 | MAC_1000FD | MAC_2500FD;
}
static void felix_phylink_validate(struct dsa_switch *ds, int port,
--
2.25.1
