On 6.10.2022 11:58, Neil Armstrong wrote:
> Fix the sx150xq node names to pinctrl and use the right probe-reset property.
>
> Signed-off-by: Neil Armstrong <neil.armstrong@xxxxxxxxxx>
> ---
Could you please also fix up the property order (may be in a separate patchset ofc)?
Reviewed-by: Konrad Dybcio <konrad.dybcio@xxxxxxxxxxxxxx>
Konrad
> arch/arm/boot/dts/qcom-mdm9615-wp8548-mangoh-green.dts | 12 ++++++------
> 1 file changed, 6 insertions(+), 6 deletions(-)
>
> diff --git a/arch/arm/boot/dts/qcom-mdm9615-wp8548-mangoh-green.dts b/arch/arm/boot/dts/qcom-mdm9615-wp8548-mangoh-green.dts
> index 30a110984597..a8304769b509 100644
> --- a/arch/arm/boot/dts/qcom-mdm9615-wp8548-mangoh-green.dts
> +++ b/arch/arm/boot/dts/qcom-mdm9615-wp8548-mangoh-green.dts
> @@ -116,7 +116,7 @@ i2c@4 {
> #size-cells = <0>;
> reg = <4>;
>
> - gpioext0: gpio@3e {
> + gpioext0: pinctrl@3e {
> /* GPIO Expander 0 Mapping :
> * - 0: ARDUINO_RESET_Level shift
> * - 1: BattChrgr_PG_N
> @@ -142,7 +142,7 @@ gpioext0: gpio@3e {
> interrupt-parent = <&gpioext1>;
> interrupts = <0 IRQ_TYPE_EDGE_FALLING>;
>
> - probe-reset;
> + semtech,probe-reset;
>
> gpio-controller;
> interrupt-controller;
> @@ -154,7 +154,7 @@ i2c@5 {
> #size-cells = <0>;
> reg = <5>;
>
> - gpioext1: gpio@3f {
> + gpioext1: pinctrl@3f {
> /* GPIO Expander 1 Mapping :
> * - 0: GPIOEXP_INT1
> * - 1: Battery detect
> @@ -183,7 +183,7 @@ gpioext1: gpio@3f {
> interrupt-parent = <&msmgpio>;
> interrupts = <0 IRQ_TYPE_EDGE_FALLING>;
>
> - probe-reset;
> + semtech,probe-reset;
>
> gpio-controller;
> interrupt-controller;
> @@ -195,7 +195,7 @@ i2c@6 {
> #size-cells = <0>;
> reg = <6>;
>
> - gpioext2: gpio@70 {
> + gpioext2: pinctrl@70 {
> /* GPIO Expander 2 Mapping :
> * - 0: USB_HUB_INTn
> * - 1: HUB_CONNECT
> @@ -221,7 +221,7 @@ gpioext2: gpio@70 {
> interrupt-parent = <&gpioext1>;
> interrupts = <14 IRQ_TYPE_EDGE_FALLING>;
>
> - probe-reset;
> + semtech,probe-reset;
>
> gpio-controller;
> interrupt-controller;
>
